Polymer Property : Tear Strength = 130 kN/m Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tear Strength	130 kN/m	742 pli	Die C; ASTM D624
Covestro Texin® 5250 Thermoplastic Polyurethane, Polyether-based, Medical (discontinued **) This grade is in chemical compliance with 21 CFR 177.1680 (Polyurethane Resins) and 177.2600 (Rubber articles intended for repeated use) subject to the limitations of this regulation and any other r..
Tear Strength	130 kN/m	742 pli	ASTM D624 (Die C)
Lubrizol Advanced Materials PEARLTHANE® D16N90UV Thermoplastic Polyurethane Elastomer (discontinued **) PEARLTHANE® D16N90UV is a polyether-based TPU, containing an anti-UV additive, supplied in form of transparent, colorless pellets, offering adequate hardness, excellent mechanical properties and go..
Tear Strength	130 kN/m	740 pli	ASTM D624
Huntsman IROGRANÂ® A 92 K 5031 TPU-High Temperature Performance Polycaprolactone and ether based. Good processability and compression set. Excellent resistance to high temperatures, water, grease, and oils.. Used in seals, wheels, and rollers.Information prov..
Tear Strength	<= 130 kN/m	<= 742 pli	Mapal internal
Mapal Plastics Maplon Type 3G Polypropylene Sheet Maplon type â€œ3Gâ€ is a single layer highly polished clear sheets, with anti-blocking properties.Main advantages: High clarity and low haze, Easy to convert due to reduced blocking, High dur..
Tear Strength	<= 130 kN/m	<= 742 pli	Mapal internal method
Mapal Plastics Maplon Type D Polypropylene Sheet Main advantages: High clarity and medium haze, High durability, Water and chemical resistance, High heat resistance, Unlimited flex life of integral hinge, Easy to convertMain disadvantages: Low scr..
Tear Strength	130 kN/m	740 pli	ISO 34-1B
Lubrizol Advanced Materials PEARLTHANEÂ® 11T92E Thermoplastic Polyurethane Elastomer Type: PearlthaneÂ® 11T92E is a polycaprolactone copolyester-based thermoplastic polyurethane.Main Application : Extrusion/MouldingSpecial Features : Combining hardness with excellent mechanical pr..
Tear Strength	130 kN/m	742 pli	ASTM D624 DIE C
Lubrizol Advanced Materials PearlthaneÂ® 12H92E Thermoplastic Polyurethane Elastomer PearlthaneÂ® 12H92E is a special polyester-based TPU, supplied in form of translucent, colorless pellets, combining hardness with excellent processability and excellent low temperature performance..
Tear Strength	130 kN/m	742 pli	ASTM D624 (Die C)
Lubrizol Advanced Materials PEARLTHANEÂ® 16N95UV Thermoplastic Polyurethane Elastomer PEARLTHANEÂ® 16N95UV is a polyether-based TPU, containing an anti-UV additive, supplied in form of translucent, colorless pellets, combining hardness with excellent mechanical properties and excel..
Tear Strength	130 kN/m	742 pli	ISO 34B
Huntsman AVALONÂ® 95 AE Thermoplastic Polyurethane Introduction: AVALON 95 AE is a general purpose polyester based thermoplastic polyurethane for injection molding. AVALON 95 AE is part of the AVALON Perform Range and offers a premium soiling materi..
Tear Strength	130 kN/m	742 pli	ISO 34B
Huntsman AVALONÂ® 95 AEU Thermoplastic Polyurethane Introduction: AVALON 95 AEU is a general purpose polyester based thermoplastic polyurethane for injection molding. AVALON 95 AEU is part of the AVALON Perform Range and offers a premium soiling mate..
Tear Strength	130 kN/m	740 pli	ASTM D624
Huntsman IROGRANÂ® A 92 E 4738 Polyester-Based TPU-Injection Extrusion Grade Introduction: IROGRAN A 92 E 4738 is a white-colored, thermoplastic special-polyester-polyurethane for injection molding applications. Additional characteristics of the product are flexibility and h..
Tear Strength	130 kN/m	742 pli	ASTM D624
LyondellBasell Astryn BE17FC Polypropylene Copolymer, 40% Calcium Carbonate Key Features: fractional melt flow, medium high modulus, UV-stabilized, mineral-filled, blow molding and extrusion grade polypropylene copolymer, excellent impact and stiffness balance, good melt st..
Tear Strength	130 kN/m	742 pli	ASTM D1004
SK Chemicals SKYPEL M555CR Special Grade Copper Resistance SKYPEL is a thermoplastic polyester elastomer (TPEE). It is a polymer resin having the property somewhere between plastics and rubber, which have various properties ranging from high hardness plasti..
Tear Strength	130 kN/m	742 pli	DIN 53515
Lubrizol ESTANE® ETE50DS3 Ester Based Thermoplastic Polyurethane (European Grade) Description: Estane® thermoplastic polyurethanes (TPUs) include elastomeric materials that bridge the gap between flexible rubber and rigid plastics. These materials offer toughness and durability ..
Tear Strength	130 - 200 kN/m	742 - 1140 pli
Goodfellow Polyvinyl Fluoride (PVF) Film A semi-crystalline, colorless, transparent-translucent fluoropolymer with excellent weathering resistance, good chemical resistance and low permeability to gases; it is very slow burning and has a v..
Tear Strength	130 kN/m	742 pli	ISO 34
Chengdu Polyster H4543B Thermoplastic Polyether-ester Elastomer (TPEE) Low modulus molding and extrusion grade. Contains color-stable antioxidants. Good balance of low and high temperature properties. Excellent flex-fatigue resistance. Excellent creep resistance. CVJ b..
Tear Strength	130 kN/m	742 pli	ISO 34
Chengdu Polyster H5550 Thermoplastic Polyether-ester Elastomer (TPEE) Medium-low modulus molding and injection grade. Contains improved color- stable antioxidants. Good balance of low and high temperature properties. Applications requiring high original color retentio..
Tear Strength	130 kN/m	742 pli	DIN ISO 34-1/Bb
BASF Elastollan C 98 A TPUR Description: Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties and chemical resistance, outstanding wear resistance, high tear and tensile strength, good damping c..
Tear Strength	>= 130 kN/m	>= 742 pli	ISO 34
Austin Novel Materials Texalan® 298A Polyester-based TPU Description: Good abrasion resistance, tensile strength, oil resistance and transparency which can meet different demands in various industryInformation from Dawnentech
Tear Strength	130 kN/m	742 pli	DIN ISO 34-1/Bb
BASF Elastollan 664 DU TPUR Description: Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties and wear resistance, good damping characteristics and a high resilience performance.Typical Applicat..
Tear Strength	>= 130 kN/m	>= 742 pli	ISO 34
Austin Novel Materials Texalan® 664D Polyester and Polyether based TPU Description: A kind of custom-made products which use different raw materials to meet customers special requirementsInformation from Dawnentech
Tear Strength	130 kN/m	742 pli	ASTM D624
Wanhua Chemical Wanthane® WHT-1595 Polyester Based TPU Low cost, good mechanical properties, good processabilityInformation provided by Wanhua Chemical Group Co., Ltd.
Tear Strength	130 - 230 kN/m	742 - 1310 pli	Average value: 180 kN/m Grade Count:4
Overview of materials for Polypropylene, Sheet/Thermoforming Grade This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Sheet/Thermoforming Grade". Each property range of values reported is minimum and maximum..