Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Puncture Energy | 20.0 J | 14.8 ft-lb | ISO 6603-2 |
Lanxess Durethan® A 30 H2.0 901510 Nylon 66 PA 66 standard injection molding grade, non-reinforced, very easy release, good heat-ageing resistanceApplication Examples: terminal blocks, cable clips, bobbins, gearwheels |
|||
Puncture Energy | 20.0 J @Temperature -30.0 °C |
14.8 ft-lb @Temperature -22.0 °F |
ISO 6603-2 |
Lanxess Durethan® BC 30 000000 Nylon 6 PA 6, injection molding grade, non-reinforced, rapid processing, higher notched impact strength than B 30 S / B 31 SK in dry and conditioned state, impact-modified |
|||
Puncture Energy | 20.0 J @Temperature -30.0 °C |
14.8 ft-lb @Temperature -22.0 °F |
Conditioned; ISO 6603-2 |
Lanxess Durethan® BC 30 000000 Nylon 6 PA 6, injection molding grade, non-reinforced, rapid processing, higher notched impact strength than B 30 S / B 31 SK in dry and conditioned state, impact-modified |
|||
Puncture Energy | 20.0 J @Load <=309.1 kg, Temperature 23.0 °C |
14.8 ft-lb @Load <=681.4 lb, Temperature 73.4 °F |
d.a.m.; ISO 6603-2 |
Lanxess Durethan® BM 240 000000 Nylon 6, Mineral Reinforced PA 6, injection molding, 40% mineral, isotopic properties, low warpageInformation provided by LANXESS. |
|||
Puncture Energy | 20.0 J @Load <=309.1 kg, Temperature 23.0 °C |
14.8 ft-lb @Load <=681.4 lb, Temperature 73.4 °F |
ISO 6603-2 |
Lanxess Durethan® BM 240 H3.0 000000 Nylon 6, 40% Mineral PA 6, 40% mineral, injection molding, heat-ageing stabilized, low tendency to warp, isotopic properties |
|||
Puncture Energy | 20.0 J | 14.8 ft-lb | ISO 6603-2 |
Covestro Makrolon® 1095 Polycarbonate, 15% Glass Filled ISO 7391-PC,MR,(,,)-09-9,GF15Global gradeMVR (300 °C/1.2 kg) 6.0 cm3/10 min15 % Glass fiber reinforcedHigh viscosityEasy releaseInjection molding - Melt temperature 310 - 330 °CExtrusionAvailable .. |