Polymer Property : Dart Drop, Total Energy = 17.0 ft-lb Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Dart Drop, Total Energy	23.0 J @Temperature -15.0 Â°C	17.0 ft-lb @Temperature 5.00 Â°F	Instrumented Energy at Maximum Load, Ductile Failure; ASTM D3763
LyondellBasell Hifaxâ„¢ CB247G Thermoplastic Polyolefin Elastomer Description: Hifaxâ„¢ CB247G high melt flow, 1,700 MPa flexural modulus, UV-stabilized, weatherable, mineral-filled thermoplastic elastomeric olefin (TEO) resin has a very good balance of propert..
Dart Drop, Total Energy	23.0 J @Temperature -30.0 Â°C	17.0 ft-lb @Temperature -22.0 Â°F	Instrumented Impact Energy @ peak, -30Â°C @ 2.2 m/s; ASTM D3763
SABIC Innovative Plastics SABIC PPCOMPOUND 5521 PP SABICÂ® PPcompound 5521 is a mineral filled, impact modified polypropylene TPO. This material combines good flow with exterior automotive weathering stability. The general purpose black color prod..
Dart Drop, Total Energy	23.0 J @Temperature -30.0 Â°C	17.0 ft-lb @Temperature -22.0 Â°F	Peak Energy; ASTM D3763
Styron MAGNUMâ„¢ 3325 SLG Acrylonitrile Butadiene Styrene (ABS) Resin Overview: Super Low Gloss, Medium Heat, Medium Impact ABS resin for injection molded automotive interior trim applications Magnum 3325 SLG can achieve 60Â° Gardner gloss levels below 2.0 with low ..
Dart Drop, Total Energy	23.0 J @Temperature -30.0 Â°C	17.0 ft-lb @Temperature -22.0 Â°F	Peak Energy; ASTM D3763
Styron MAGNUMâ„¢ 375 HH Acrylonitrile Butadiene Styrene (ABS) Resin Overview: High Heat, Low Gloss, Medium Impact ABS resin for injection moldingApplications: Automotive interior trim applications requiring low volatile organic compounds (VOC)Information provided by..
Dart Drop, Total Energy	23.0 J @Temperature -30.0 Â°C	17.0 ft-lb @Temperature -22.0 Â°F	Peak Energy; ASTM D3763
Styron MAGNUMâ„¢ 375 HP Acrylonitrile Butadiene Styrene (ABS) Resin Overview: High Heat, Low Gloss, Medium Impact ABS resin for injection molded automotive interior trim applications.Applications: Chrysler-MSDB-191Ford-WSB-M4D690-AGM-GMP.ABS.009Information provided ..
Dart Drop, Total Energy	23.0 J @Temperature 23.0 Â°C	17.0 ft-lb @Temperature 73.4 Â°F	ASTM D3763
SABIC Innovative Plastics NORYL HIPS3190 HIPS Complies with FDA Regulation 21 CFR 177.1640 for rubber modified polystyrene. HB rating from 0.062-0.125"" pending. Natural only.
Dart Drop, Total Energy	23.0 J @Temperature -20.0 °C	17.0 ft-lb @Temperature -4.00 °F	ASTM D3763
ExxonMobil LDPE LD 516.LN Low Density Polyethylene Resin Product Description: LD 516.LN is a medium MI, low density polyethylene resin designed for use in color concentrates and masterbatches where its flow properties ensure improved processability and un..
Dart Drop, Total Energy	23.0 J @Temperature -30.0 °C	17.0 ft-lb @Temperature -22.0 °F	Instrumented Impact Energy @ peak, -30°C @ 2.2 m/s; ASTM D3763
SABIC Innovative Plastics SABIC PPCOMPOUND 5310 PP SABIC® PPcompound 5310 is a mineral filled, impact modified polypropylene TPO. This material combines scratch resistance and heat stability with exterior automotive weathering stability. The IMDS I..
Dart Drop, Total Energy	23.0 J @Temperature 23.0 °C	17.0 ft-lb @Temperature 73.4 °F	6.6 m/sec, Ductile; ASTM D3763
Styron INSPIRE™ TF7000 ES Natural Performance Polymer INSPIRE* TF7000 ES Natural Performance Polymer DA™ is a very high stiffness (2400 MPa) TPO designed for instrument panel upper and lower components, as well as other interior trim applications wher..