Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
PolyOne Lubri-Tech™ ATH-000/02T Homopolymer - 2% PTFE
(discontinued **) Data provided by PolyOne. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
Plenco 307 Black Impact Grade Mineral/Flock Filled Phenolic Molding Compound
(discontinued **) Plaslok 307 is a two-stage, mineral and flock-filled phenolic molding compound designed for the automotive industry for use in brake system components. It is characterized by good molding latitude .. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
Plaslok 307 Black Impact Grade Mineral/Flock Filled Phenolic Molding Compound
(discontinued **) Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use.Plaslok 307 is a two-stage, mineral and flock.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
IDI Composites W-103 Thermoset Polyester, Molding Premium appearance grade materials in a range of strengths for cookware and appliance applications.Data provided by the manufacturer. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | |
GBC L3 Steatite Ideal for high frequency, low loss, high voltage insulation. Much less expensive than alumina insulatorsApplications: resistor forms, surge arrestors, standoffs, spacers, and coil forms.Machinabili.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | |
Haysite 270FRII Polyester BMC, Glass Reinforced Haysite Grade 270FRII is a second generation glass reinforced thermoset polyester bulk molding compound. This material can be compression, transfer, or injection molded. Qualified under MIL-M-14, Ty.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | 50 mm/min; ISO 527-2 |
Styron CALIBREâ„¢ 7104-8 Polycarbonate CALIBREâ„¢ 7104-8 glass-reinforced resin offers increased modulus and improved heat distortion resistance, with minimal shrinkage. It also offers outstanding UL-94 flammability ratings. CALIBRE.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
Sumitomo Bakelite Durez® 31906 Phenolic, Injection Grade Durez 31906 Black Phenolic is an asbestos free, medium impact, molding compound. It is designed for applications where additional mechanical strength is required.Information provided by Sumitomo Ba.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
Plenco 00714 Melamine-Phenolic, Granular, Compression Molded PLENCO 00714 is a melamine-phenolic copolymer molding compound, offering excellent arc resistance and comparative track index values. Type ASTM D 5948 CMG, and UL recognized under component file E4.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
Plenco 2311 Phenolic, Granular, Injection Molded PLENCO 02311 is a versatile general purpose organic filled phenolic molding compound offering excellent mold processability and optimized cure cycles. PLENCO 02311 is also granulated to provide impr.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
Plenco 2482 Phenolic, Granular, Transfer Molded PLENCO 02482 is a general purpose, organic filled phenolic molding compound offering excellent mechanical strength while maintaining dielectric properties at elevated humidity levels. UL recognized .. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
Plenco 2535 Phenolic, Granular, Compression Molded PLENCO 02535 is a general purpose, organic filled phenolic molding compound offering optimized cure characteristics and excellent electrical properties. Type ASTM 5948 CFG, and UL recognized under c.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ISO 527-1, 2 |
Polyplastics Duracon® TR-20 Acetal Co-polymer (POM), Mineral filling, Mineral filling, High rigidity, Low warpage DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O).. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ISO 527-2/1A/5 |
Lubrizol ESTALOC® T514 Ester-Type, Reinforced Engineering Thermoplastic (European Grade) Description: Estaloc® RETP (Reinforced Engineering Thermoplastic) is a tough, dimensionally stable, abrasion-resistant thermoplastic that withstands demanding environments. Developed as an extensio.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | |
Du-Co Ceramics DC-16-L-3 Steatite Properties reported below are averages from unglazed specimens. Tests performed to ASTM specifications. Actual values may vary. Information provided by DU-CO Ceramics Company. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | |
Du-Co Ceramics DC-9-L-3 Steatite Properties reported below are averages from unglazed specimens. Tests performed to ASTM specifications. Actual values may vary. Information provided by DU-CO Ceramics Company. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | |
BASF Polystyrol® 168 N Polystyrene (Europe) High molecular, heat-resistant grades used where high strength is required. Suitable for expanded film.Data was collected by ISO methods and provided by BASF. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ATSM D638 |
Ashley Polymers Ashlene® 1410B Polycarbonate, 8-10% Glass Reinforced A rigid black polycarbonate, for applications requiring superior dimensional stability and overall toughness. Contains 8-10% glass reinforcement. Also available: 1413B, UV stabilized.Data provided.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ATSM D638 |
Ashley Polymers Ashlene® 1513 Polycarbonate A rigid flame retardant polycarbonate, UV stabilized in black for applications requiring superior dimensional stability and overall toughness.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ATSM D638 |
Ashley Polymers Ashlene® 64M Nylon 66 A reinforced modified, platable nylon with high impact and excellent dimensional stability.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
A. Schulman ComAlloy Lubrilon® 606 Nylon 6/6, PTFE Filled, Flow Enhanced Data provided by the manufacturer, ComAlloy International Company. High performance and excellent lubricity with minimal surface wear.The ComAlloy product line has been integrated into the A Schulma.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | Static |
Channel Industries 600 Barium Titanate Piezoelectric Modified barium titanates are widely used in transducers requiring moderate power level and receiving sensitivity. Special characteristics have made barium titanate a proven material for use in devi.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | |
Ineos ABS TRIAX® 1408 GF ABS/Nylon Blend, Injection Grade, Dry as Molded
(discontinued **) Injection molding grade, higher stiffness, good stress corrosion cracking resistance and chemical resistance (fuel, cleaning agents).Information provided by Bayer.LANXESS was spun-off from Bayer in .. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
PolyOne Edgetek® AT-000/07SS Copolymer Acetal - 7% Stainless Steel Fiber
(discontinued **) Data provided by PolyOne. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
Plenco 4485 Phenolic, Granular, Transfer Molded PLENCO 04485 is a mineral filled phenolic molding compound offering excellent heat resistance, electrical resistance, and dimensional stability. UL recognized under component file E40654. 04485 is a.. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ISO 527-1, 2 |
Polyplastics Duracon® GB-25 Acetal Co-polymer (POM), Low warpage, GB 25% filling DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O).. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ISO 527-1, 2 |
Polyplastics Duracon® M25-44/M25S Acetal Co-polymer (POM), Standard, High viscosity DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O).. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ISO 527-1, 2 |
Polyplastics Duracon® M25-45 Acetal Co-polymer (POM), Weather resistance, High viscosity DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O).. |
|||
Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | ASTM D638 |
PolyOne Lubri-Tech™ MP-15MCF/15T-2S Modified PPO - 15% Milled Carbon Fiber - 15% PTFE - 2% Silicone
(disconti Data provided by PolyOne. |