Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | Typical value for Abatron "VR" Epoxies. |
Abatron AboCast 8101-4/AboCure 8101-4 Epoxy
(discontinued **) Data provided by the manufacturer, Abatron, Inc. Medium Amber liquid, Very low viscosity. Shelf life is 12+ months.Processing: 2/1 ratio. Pot life: 20-30 minutes.Applications: wood restoration, co.. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | Typical value for Abatron "VR" Epoxies. |
Abatron AboCast 8101-8/AboCure 8101-8 Epoxy
(discontinued **) Data provided by the manufacturer, Abatron, Inc. Tar filled, low-viscosity, black, plasticized resurfacing and patching compound. Shelf life is 12+ months.Processing: Pot-life: 1-2 hrs. 1/1 ratio... |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | Typical value for Abatron "VR" Epoxies. |
Abatron AboWeld 55-25/AboCure 55-25 Epoxy
(discontinued **) Data provided by the manufacturer, Abatron, Inc. Paste form, Modified for minimum shrinkage and better heat transfer. Custom colors. Shelf life is 12+ months.Processing: 1/1 ratio. Pot life: 1-2 .. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | Typical value for Abatron "VR" Epoxies. |
Abatron AboWeld 7801-5/AboCure 7801-5 Epoxy
(discontinued **) Data provided by the manufacturer, Abatron, Inc. Aluminum filled thixotropic paste. The most versatile of metal-filled pastes. Shelf life is 12+ months.Processing: Pot life: 1-2 hrs. 2/1 ratio. Li.. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | Typical value for Abatron "VR" Epoxies. |
Abatron AboWeld 8012-4/AboCure 8012-4 Epoxy
(discontinued **) Data provided by the manufacturer, Abatron, Inc. A "Woodepox" version. neutral or colored; Low shrinkage. Shelf life is 12+ months.Processing: Pot life: 30-40 minutes. 1/1 ratio. Filled.Applicatio.. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | Typical value for Abatron "VR" Epoxies. |
Abatron AboWeld 8012-5/AboCure 8012-5 Epoxy
(discontinued **) Data provided by the manufacturer, Abatron, Inc. Aluminum filled putty, "plastic aluminum". non-shrinking, tough adhesive filler. Shelf life is 12+ months.Processing: Pot life: 1-2 hrs. 2/1 ratio... |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | Typical value for Abatron "VR" Epoxies. |
Abatron AboWeld 8012-6/AboCure 8012-6 Epoxy
(discontinued **) Data provided by the manufacturer, Abatron, Inc. Iron filled putty, "plastic steel". non-shrinking, adhesive filler. Shelf life is 12+ months.Processing: Pot life: 1-2 hrs. 2/1 ratio.Applications:.. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | Typical value for Abatron "VR" Epoxies. |
Abatron AboWeld 8101-9/AboCure 8101-9 Epoxy
(discontinued **) Data provided by the manufacturer, Abatron, Inc. Aluminum filled thixotropic paste. Highest heat, solvent and chemical resistance. Shelf life is 12+ months.Processing: Pot life: 1-2 hrs. 2/1 ratio.. |
|||
Tensile Strength, Ultimate | 55.0 - 321.64 MPa @Temperature -40.0 - 150 °C |
7980 - 46650 psi @Temperature -40.0 - 302 °F |
Average value: 139 MPa Grade Count:4 |
Overview of materials for Nylon 6, 50% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, 50% Glass Fiber Filled". Specific grades with glass content between 45% and 54% are included. E.. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D638 |
Plenco 202 Black General Purpose Woodflour Filled Phenolic Molding Compound
(discontinued **) Plaslok 202 is a two-stage, woodflour-filled phenolic molding compound formulated to provide improved impact and fatigue strength, good dimensional stability and excellent molded finish for automoti.. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D638 |
Plaslok 202 Black General Purpose Woodflour Filled Phenolic Molding Compound
(discontinued **) Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use.Plaslok 202 is a two-stage, woodflour-filled .. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D638 |
LyondellBasell Higlass BJ22GC Polypropylene Copolymer, 30% Glass Fiber Key Features: conventional melt flow, medium high modulus, UV-stabilized, chemically coupled, glass fiber-reinforced polypropylene copolymer, moderately high rigidity, high impact strength, excellen.. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D638 |
Sumitomo Bakelite Durez® 153 Phenolic, Compression Grade Durez 153 Black Phenolic is a two-stage, asbestos-free, heat resistant/electrical molding material. It exhibits good molded appearance and shock resistance for use on a wide variety of electrical a.. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D638 |
Sumitomo Bakelite North America RX® 2-501N Mineral Filled Diallyl Phthalate Isophthalate DAP Resin Isomer. Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Conforms with the requirements of ASTM D5948.. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D638 |
Sumitomo Bakelite Durez® 22257 Phenolic, Injection Grade Durez 22257 Black Phenolic is a two-stage, asbestos-free, medium impact molding material. It is designed for appliance and electrical applications where additional mechanical strength is required. .. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | at max load; ASTM D638 |
A. Schulman POLYPUR™ FPU 1550 Thermoplastic Polyurethane Compound Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D638 |
Plenco 5482 Phenolic, Granular, Transfer Molded PLENCO 05482 is an organic reinforced phenolic molding compound formulated with graphite to improve the abrasion resistance. 05482 is available in black and brown. 05482 is not recommended for elect.. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | at max load; ASTM D638 |
A. Schulman POLYPUR™ FPU 1550 Thermoplastic Polyurethane Compound Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | at max load; ASTM D638 |
A. Schulman POLYPUR™ FPU 1550 Thermoplastic Polyurethane Compound Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | >= 55.0 MPa | >= 7980 psi | ASTM D882 |
Chengdu Polyster KLX-G42 PC Film & Sheet PC film, high transparency, one side is velvet the other side is matte.Information provided by Chengdu Polyster Co., Ltd. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D651 |
Chang Chun Plastic Longlite PM T308J General Purpose Phenolic Molding Compound ASTM Grade per ASTM D700 is 3.Information provided by Dowell Trading Company Ltd. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | Typical value for Abatron "VR" Epoxies. |
Abatron AboCast 8012-9/AboCure 8012-9 Epoxy Data provided by the manufacturer, Abatron, Inc. 5-minute epoxy. Light Amber color, Medium viscosity. Not as brittle as conventional 5-minute epoxies. Fastest Abatron "VR" Epoxy with good physical .. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ATSM D638 |
Ashley Polymers Ashlene® 734LD Nylon 6 A plasticized, highly flexible Nylon 6 with high impact resistance.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM data at 5 mm/min. |
BASF Capron® 8260 HS BK-102 40% Mineral-Filled Nylon 6 (Conditioned)
(discontinued **) Capron 8260 HS BK-102 is a heat stabilized, pigmented black, 40% mineral reinforced nylon 6 injection molding resin. It possesses high stiffness, dimensional stability and heat resistance combined .. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ISO 527-1, 2 |
Polyplastics Duracon® EB-08 Acetal Co-polymer (POM), Conductive, Antistatic DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O).. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D638 |
Sumitomo Bakelite North America FM 4009 Fiberglass Reinforced Phenolic Novolac FM 4009 is a fiberglass reinforced phenolic novolac molding compound formulated for excellent wear resistance.Information supplied by Sumitomo Bak North America. |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ISO 527-1/-2 |
DSM Arnite® TB6 260 PBT-GB30 |
|||
Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ISO 527 |
LATI LATILUB 80-40GRT Polyphenylene sulfide Base (PPS), 40% Graphite and PTFE Self Lubricating Plastic
(U Description: Latilub self-lubricating plastic materials are more and more often designed to replace metals in applications such as gears, bushings, cams, slides, etc), for which, besides their intri.. |