Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 283 MPa | 41000 psi | |
PCP-Canada ALCA 5® 5083 Cast Aluminum Mold Plate ALCA5® cast precision plate product has an excellent dimensional stability. The low level of internal stress reduces the plate deformation during and after machining. This high stability leads to c.. |
|||
Tensile Strength, Ultimate | 283 MPa | 41000 psi | |
Vista Metals ATP-5™ Precision Cast Aluminum Plate Used where flatness and dimensional control are critical, such as: computer & electronics, pharmaceuticals, medical testing equipment, packaging machinery, printing machinery, thermoforming tools, m.. |
|||
Tensile Strength, Ultimate | 283 MPa | 41000 psi | |
Vista Metals Duramold-5™ Cast Aluminum Mold Plate Used for molds for the automotive industry, blow molds, structural foam molds, rubber molds, low pressure injection molds, Thermoforming molds, R.I.M. and R.T.M. molding.Features: Excellent Machinab.. |
|||
Tensile Strength, Ultimate | 283 - 345 MPa | 41000 - 50000 psi | |
Eagle Brass 110 EPT COPPER, 3/4 Hard Alloy 110, also known as electrolytic tough pitch (ETP) copper, is commonly used in electric current carrying applications. 110 Copper is 99.9% pure copper with an electrical conductivity rating of .. |
|||
Tensile Strength, Ultimate | 283 - 324 MPa | 41000 - 47000 psi | |
Eagle Brass 425 Tin Brass 2%, Annealed Alloy C425 is a low zinc-containing alloy with good combination of tensile strength, electrical conductivity, formability and corrosion resistance. Applications include electrical springs, connector.. |
|||
Tensile Strength, Ultimate | 283 - 345 MPa | 41000 - 50000 psi | |
Eagle Brass 101 OFE COPPER (Certified), 3/4 Hard Alloy 101 is known as Oxygen-Free Electronic (OFE). It reaches a minimum of 101% IACS conductivity rating. It is the most expensive out of the 101- 110 group because of its higher purity.Information.. |
|||
Tensile Strength, Ultimate | 283 - 345 MPa | 41000 - 50000 psi | |
Eagle Brass 102 OF COPPER (Non-Certified), 3/4 Hard Alloy 102 is an oxygen-free copper which has better forming, resistance to hydrogen embrittlement, and brazing characteristics than C110 ETP. C102 has good solder-ability and corrosion resistance an.. |
|||
Tensile Strength, Ultimate | 283 MPa | 41000 psi | Typical |
Alpase K100-S™ Aluminum Plate K100-S™ features and benefits include: Dimensional stability, fully weldable, anodizable, high elongation, consistent properties - regardless of size, close flatness and tolerances, superior corros.. |
|||
Tensile Strength, Ultimate | 283 MPa | 41000 psi | |
Alpase M-5™ Aluminum Mold Plate Excellent weldabilitySurface Condition - Machined top and bottom to reduce costly handling and machining stepsDimensional Stability - High dimensional stability during and after machiningPolishing -.. |
|||
Tensile Strength, Ultimate | 283 MPa | 41000 psi | |
Ametek P409L/409CB P/M Stainless Steel, Sintered from 6.00 g/cc Green Density P409L/409CB is a ferritic, weldable grade of stainless steel with high compressibility, enhanced green strength and good sinterability. This stabilized grade provides excellent corrosion resistance .. |
|||
Tensile Strength, Ultimate | 282.7 MPa @Temperature 537 °C |
41000 psi @Temperature 999 °F |
|
ATI Allegheny Ludlum AL 468™ Dual Stabilized- Low Titanium Stainless Steel Characteristics:good corrosion resistance in a wide range of environments, can be used in annealed cold formed or as-welded conditions. Applications: used in place of Type 304 in an oxidizing when .. |
|||
Tensile Strength, Ultimate | 283 MPa | 41000 psi | |
Ametek P409L P/M Stainless Steel, Sintered from 6.00 g/cc Green Density P409L is a ferritic, weldable grade of stainless steel with high compressibility, enhanced green strength and good sinterability. This stabilized grade provides excellent corrosion resistance and ha.. |
|||
Tensile Strength, Ultimate | 283 MPa | 41000 psi | |
PCP-Canada Max 5® 5083 Cast Aluminum Mold Block Max 5® is characterized by an excellent dimensional stability. It is a 5083 alloy which provides strength, good hard anodizing response, weldability, and machinability (with sintered carbide materi.. |