- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength, Ultimate = 3630 psi
Polymer Property : Tensile Strength, Ultimate = 3630 psi Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 25.0 MPa | 3630 psi | ASTM D638 |
| NCMT NanoPAC™ N12 High Performance Polypropylene Nanocomposite Characteristics: Less shrinkage Solved distortion problem Good balance in impact and stiffness High gloss Reduce production cycleApplications: Household Industry Toys IndustryInformation provided by.. |
|||
| Tensile Strength, Ultimate | 25.0 MPa | 3630 psi | ASTM D638 |
| North Wood Plastics Polypropylene with 40% Wood Fiber, Molding Grade Data provided by North Wood Plastics, Inc. |
|||
| Tensile Strength, Ultimate | 25.0 - 80.0 MPa @Temperature 60.0 - 150 °C |
3630 - 11600 psi @Temperature 140 - 302 °F |
Average value: 55.0 MPa Grade Count:2 |
| Overview of materials for Polyetheretherketone, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Polyetheretherketone, Unreinforced". Each property range of values reported is minimum and maximum value.. |
|||
| Tensile Strength, Ultimate | 25.0 MPa | 3630 psi | ASTM D638 |
| Total Finaclear® 530 Clear Impact Polystyrene
(discontinued **) Finaclear® 530 is a clear high styrenic styrene-butadiene (SBS) elastomer, providing dramatically improved impact properties and tear resistance to finished articles, when used in blends with other.. |
|||
| Tensile Strength, Ultimate | 25.0 MPa | 3630 psi | DIN 53455 |
| Ineos Nova S-6600MG Compact Polystyrene Microgranulates
(discontinued **) High impact polystyrene Microgranulates, having a diameter of 0.8 - 1.0 mm especially useful for compounding and extrusion applications. Due to the higher viscosity intensive mixing with thermoplas.. |
|||
| Tensile Strength, Ultimate | 25.0 MPa | 3630 psi | 500 mm/min (20 in./min.); Type IV Specimen; ASTM D638 |
| Eastman M2001-P Polyethylene
(discontinued **) M2001-P polyethylene is suggested for applications such as spiral-wound can linings, release paper and photographic paper. M2001-P has been found to exhibit good barrier properties, temperature res.. |
|||
| Tensile Strength, Ultimate | 25.0 - 317 MPa | 3630 - 46000 psi | Average value: 133 MPa Grade Count:19 |
| Overview of materials for Polypropylene, Fiber Grade This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Fiber Grade". Each property range of values reported is minimum and maximum values of app.. |
|||
| Tensile Strength, Ultimate | 25.0 - 45.0 MPa | 3630 - 6530 psi | 50 mm/min; ASTM D638 |
| Solvay Specialty Polymers Solef® 1015/0078 PVDF Homopolymer
(discontinued **) Key features of this grade: Plasticized, Offshore, Piping, Formulated. Recommended processing is extrusion. Available as granules.General information about SOLEF® PVDF: SOLEF® PVDF is a fluorina.. |
|||
| Tensile Strength, Ultimate | 25.0 MPa | 3630 psi | ASTM D638 |
| ExxonMobil Iotek® 7010 Zinc Ionomer Molding/Extrusion Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A zinc ionomer with excellent flexibility, abrasion resistance, impact strength and tensile strength. This ionomer has outstanding adhesion to glas.. |
|||
| Tensile Strength, Ultimate | 25.0 - 75.5 MPa | 3630 - 11000 psi | Average value: 39.2 MPa Grade Count:34 |
| Overview of materials for Acrylonitrile/Styrene/Acrylate (ASA), Unreinforced, Molded This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile/Styrene/Acrylate (ASA), Unreinforced, Molded". Each property range of values reported is m.. |
|||
| Tensile Strength, Ultimate | 25.0 - 215 MPa @Strain 1.00 - 10.0 % |
3630 - 31200 psi @Strain 1.00 - 10.0 % |
Average value: 88.6 MPa Grade Count:5 |
| Overview of materials for Nylon 66, 30% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 30% Glass Fiber Filled". Specific grades with glass content between 25% and 34% are included. .. |
|||
| Tensile Strength, Ultimate | 25.0 - 195 MPa @Strain 0.500 - 8.00 % |
3630 - 28300 psi @Strain 0.500 - 8.00 % |
Average value: 128 MPa Grade Count:1 |
| Overview of materials for Nylon 66, 50% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 50% Glass Fiber Filled". Specific grades with glass content between 45% and 54% are included. .. |
|||
| Tensile Strength, Ultimate | 25.0 - 70.0 MPa @Temperature 60.0 - 150 °C |
3630 - 10200 psi @Temperature 140 - 302 °F |
Average value: 50.9 MPa Grade Count:2 |
| Overview of materials for Nylon 66, Glass/Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Glass/Mineral Filled". Each property range of values reported is minimum and maximum values of.. |
|||
| Tensile Strength, Ultimate | 25.0 MPa | 3630 psi | |
| Kuraray HYBRAR® HD3 Thermoplastic Rubber-HDPE Blend Description: HYBRAR® is another in the series of new high performance thermoplastic rubbers developed by KURARAY using their unique isoprene technology. HYBRAR® is a special thermoplastic rubb.. |
|||
| Tensile Strength, Ultimate | 25.0 MPa @Temperature 22.0 °C |
3630 psi @Temperature 71.6 °F |
25mm flat samples, compression moulded; ISO 527-4 |
| Menzolit Menzolit® BMC 3100 Unsaturated Polyester UP BMC 3100 is a special BMC suitable for the use in head lamp reflectors. Because of its high temperature resistance and dimensional stability as well as low coefficient of thermal expansion, complex .. |
|||
| Tensile Strength, Ultimate | 25.0 MPa | 3630 psi | ASTM D638 |
| LyondellBasell Astryn BB724AC Polypropylene Copolymer Key Features: medium high melt flow, high modulus, mineral-filled polypropylene copolymer, high rigidity, good impact resistance, good processabilityApplications: automotive heater and A/C ductworkD.. |
|||
| Tensile Strength, Ultimate | 25.0 - 36.0 MPa | 3630 - 5220 psi | |
| Cosmic Plastics ID-50 Dacron Filled Ortho Diallyl Phthalate Molding Compound Data provided by the manufacturer. |
|||
| Tensile Strength, Ultimate | 25.0 - 35.0 MPa | 3630 - 5080 psi | ASTM D638 |
| Zeus PFA Tubing PFA, or perfluoroalkoxy, is well recognized for its ability to maintain mechanical integrity in extreme temperatures even when exposed to caustic chemicals. PFA comes in high purity versions that ar.. |
|||
| Tensile Strength, Ultimate | 25.0 MPa @Temperature 80.0 °C |
3630 psi @Temperature 176 °F |
ASTM D638 |
| Toyobo NB-5620S Nylon/Olefin Alloy, 15% Mineral Reinforced (DAM) Features: 15% Mineral Reinforced, Light WeightInformation provided by Toyobo. |
|||
| Tensile Strength, Ultimate | 25.0 - 34.0 MPa | 3630 - 4930 psi | |
| Cosmic Plastics ID-40 Orlon Filled Ortho Diallyl Phthalate Molding Compound Data provided by the manufacturer. |
|||
| Tensile Strength, Ultimate | 25.0 MPa | 3630 psi | ISO 527-1 |
| Chengdu Polyster FH5550 Thermoplastic Polyether-ester Elastomer (TPEE) Blend of H5550 and self-made flame retardant material. Flame retardant, good balance of low and high temperature properties. Applications requiring flame retardancy, such as wires, cables and optica.. |
|||
| Tensile Strength, Ultimate | 25.0 MPa | 3630 psi | ISO 527-1 |
| Chengdu Polyster H4040 Thermoplastic Polyether-ester Elastomer (TPEE) Low modulus molding and injection grade. Contains improved color- stable antioxidants. Excellent flex resistance, especially at low temperatures. Moldable even in thin sections. Can be used in light.. |
|||
| Tensile Strength, Ultimate | 25.0 - 40.0 MPa | 3630 - 5800 psi | |
| Alliance BIN-48 Bonded (Composite) Magnetic Material |
|||
| Tensile Strength, Ultimate | 25.0 - 40.0 MPa | 3630 - 5800 psi | |
| Alliance BIN-55 Bonded (Composite) Magnetic Material |
|||
| Tensile Strength, Ultimate | 25.0 MPa | 3630 psi | ASTM D638 |
| A. Schulman ComAlloy Comtuf® 164 Polypropylene, Mineral Reinforced, Chemically Coupled, Impact Modified Data provided by the manufacturer, ComAlloy International Company.20% Mineral Reinforced. Superior toughness and impact resistance characterize Comtuf® materialsThe ComAlloy product line has been i.. |
|||
| Tensile Strength, Ultimate | 25.0 MPa @Temperature 60.0 °C |
3630 psi @Temperature 140 °F |
ISO 527 |
| LATI LASTIROL TR G/10-V1 10% Glass Fiber Reinforced Polystyrene (PS) (UL94 V-1)
(discontinued **) Description: Lastirol thermoplastics are polystyrene (PS) products. The Lastirols feature excellent dimensional stability, good flowability, and can be molded without any particular problem. Glass f.. |
|||
Copyright © lookpolymers.com All Rights Reserved