Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 210 MPa | 30500 psi | Same value from ASTM and ISO tests; 5 mm/min. |
BASF Capron® 5233G 33% Glass-Filled Nylon 66 (Dry)
(discontinued **) Capron 5233G is a 33% glass fiber reinforced, polyamide 6,6 injection molding compound offering excellent strength, stiffness, creep resistance and dimensional stability. This balance of engineerin.. |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | |
MarkeTech Aluminum Oxide Ceramic - Alumina 96% Data provided by the supplier, MarkeTech International.Because of their high temperature, chemical, electrical, and mechanical properties along with their relatively low cost and ease of manufacture.. |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | |
MarkeTech Aluminum Oxide Ceramic - Alumina 97.5% Data provided by the supplier, MarkeTech International.Because of their high temperature, chemical, electrical, and mechanical properties along with their relatively low cost and ease of manufacture.. |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | |
MarkeTech Aluminum Oxide Ceramic - Alumina 98% Data provided by the supplier, MarkeTech International.Because of their high temperature, chemical, electrical, and mechanical properties along with their relatively low cost and ease of manufacture.. |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | |
GBC Grade 96 Alumina Data provided by the manufacturer, GBC Materials Corporation. |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | |
GBC Grade 97 Alumina Data provided by the manufacturer, GBC Materials Corporation. |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | |
GBC Grade 98 Alumina Data provided by the manufacturer, GBC Materials Corporation. |
|||
Tensile Strength, Ultimate | >= 210 MPa | >= 30500 psi | |
MetalTek Bearium® B-11 Bearing Bronze Exceptional frictional properties as a result of uniformly dispersed microstructure constituents.Applications: Turbine thrust bearings, centrifuge bushings, shaft sleeves, and other severe duty, mis.. |
|||
Tensile Strength, Ultimate | 210 MPa @Temperature 980 °C |
30500 psi @Temperature 1800 °F |
|
Haynes 556® alloy, hot rolled, solution annealed plate, 6.4-12.7 mm (1/2 in.) thick Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | ISO 527 |
Solvay Technyl® A 218 V35 Nylon 66, 35% Glass Fiber, EH0 Polyamides PA66, reinforced with 35% of glass fiber, heat stabilized, for injection molding.Technyl A 218 V35 is used in all sectors of industry, offering an excellent combination between thermal an.. |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | ISO 527 |
Wellman Wellamid® GF43-66 XE-N 43% Glass Fiber Reinforced Nylon 66, Lubricated & Heat Stabilized Typical Applications: Radio and TV components, dishwasher roller carriages, chain saw oil reservoirs, gears, housings, door & window latches, power hand tool housings, high temperature devices.Data .. |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | ISO 527-1/-2 |
DSM Arnite® AV2 390 XT PET GF50 50% Glass Reinforced, Applications with extremely narrow tolerances |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | dry; ISO 527-1/-2 |
DSM Stanyl® 46HF4530 PA46-GF30 30% Glass Reinforced, Heat Stabilized, High Flow, for E&E applications |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | dry; ISO 527-1/-2 |
DSM Stanyl® OCD2100 BK27021 PA46-GF40 40% Glass Reinforced, Heat Stabilized |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | dry; ISO 527-1/-2 |
DSM Stanyl® TW271F8 (PA46+PTFE)-GF40 40% Glass Reinforced, Heat Stabilized, Wear and Friction Modified |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | ISO 527-1/-2 |
DSM Arnite® AV2 390 XL PET GF50 50% Glass Reinforced, Low outgassing |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | 5mm/min; ISO 527 |
BASF Ultramid® 1503-2 NF2004 33% Glass Filled PA66 (Dry) Ultramid 1503-2 NF2004 is a 33% glass reinforced, heat stabilized injection molding PA6/6. |
|||
Tensile Strength, Ultimate | 210 MPa | 30500 psi | dry; ISO 527-1/-2 |
DSM Stanyl® TS200F6 PA46-GF30 30% Glass Reinforced |