Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 172 MPa | 25000 psi | |
Pacific Sintered Materials F-241-S Iron Powdered Metal Applications:Low stressed mechanical componentsSoft magnetic applicationsEquivalent MPIF Specification: F-0000-15All information provided by Pacific Sintered Metals. |
|||
Tensile Strength, Ultimate | 172 MPa | 25000 psi | |
PSM Industries Pacific Sintered Metals Iron F-241-S Powdered Metal Low stressed mechanical components, Soft magnetic applications Equivalent MPIF Specification: F-0000-15Information Provided by Pacific Sintered Metals, a division of PSM Industries |
|||
Tensile Strength, Ultimate | 172 MPa | 25000 psi | |
X Phenolic Laminate Paper based phenolic provides low cost electrical and mechanical properties. It is widely used for switchboards, panel boards, insulating washers, and intricate punched parts.Information provided b.. |
|||
Tensile Strength, Ultimate | 172 MPa | 25000 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
PolyOne Lubri-Tech™ NL-30CF/10T-2S Nylon 6/12, Carbon Fiber Reinforced, PTFE Lubricated
(discontinued **) Description/Features:Carbon Fiber ReinforcedPTFE LubricatedPolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
Tensile Strength, Ultimate | 172 MPa | 25000 psi | |
Meehanite CR Corrosion Resisting Cast Iron Type CR is an austenitic material especially designed to meet a wide variety of corrosion, wear and heat applications. It has flake graphite and chemical analysis conforming to ASTM Specification A.. |
|||
Tensile Strength, Ultimate | 172 MPa | 25000 psi | |
Meehanite HE Heat Resisting Cast Iron Type HE is a freely machinable material in the as-cast condition. Withstands rapid heating and cooling without premature failure, offers good dimensional stability and a good range of strength prop.. |
|||
Tensile Strength, Ultimate | 172 MPa | 25000 psi | ASTM D638 |
Techmer ES Plaslube® J-3/30/TF/15 Nylon 6, 30% GFR, 15% PTFE Plaslube glass fiber reinforced polytetrafluoroethylene (PTFE) lubricated nylon 612 grades offer a unique balance of excellent wear and friction performance with good dimensional stability and mecha.. |
|||
Tensile Strength, Ultimate | 172 MPa | 25000 psi | Bars shorter than 3.0" |
Dura-Bar 201 Type 1 Continuously Cast Ni-Resist Iron Bar Stock ASTM A436 Ni-Resist irons contain an austenitic matrix with about 10% alloy carbides. The austenitic structure is suitable for corrosive environments in sour well oils, salts, salt water acids and alkalies. .. |
|||
Tensile Strength, Ultimate | 172 MPa | 25000 psi | |
Dura-Bar G1A Continuously Cast Gray Iron Bar Stock ASTM A48 Dura-Bar G1A has Type D graphite in a predominantly ferrite matrix. This specification was originally developed for the glass mold industry where a fine grain structure and superior machining finish.. |
|||
Tensile Strength, Ultimate | 172 MPa | 25000 psi | annealed |
CMW® ELKONIUM 36 Silver Alloy The alloying of small amounts of one of the precious metals, platinum, palladium or gold with silver increases the hardness, and reduces the metal transfer tendency. These alloys maintain a low cont.. |
|||
Tensile Strength, Ultimate | 172 MPa | 25000 psi | ASTM D638 |
Applied Composites 8061 Polyester SMC Industry Application: High StrengthProduct Application: MilitaryDistinct Features: Structural Grade Chopped Fibers, High Stiffness, High Fiber LoadingsInformation provided by Applied Composites Corp.. |
|||
Tensile Strength, Ultimate | 172 MPa | 25000 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
PolyOne Edgetek® PI-20CF/000 Polyetherimide (PEI), Carbon Fiber Reinforced
(discontinued **) Description/Features:Carbon Fiber ReinforcedPolyOne First ChoiceInformation provided by PolyOne Corporation. |