Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 13.7 MPa | 1990 psi | ASTM D638 |
Multibase Multi-Flex® TPE A 8502 EXCEL GREY Heating aging the material 1000 hours at 125°C leads to a +7% change in the tensile strength, +4% change in elongation, and +12% change in tear strength. Ash is 16%. Multi-Flex TPE contains Krato.. |
|||
Tensile Strength, Ultimate | 13.7 MPa | 1990 psi | ASTM D412 |
Multibase Multi-Flex® TPE G 7940 GRAPHITE Ash is 7.3%. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Tensile Strength, Ultimate | 13.7 - 21.6 MPa | 1990 - 3130 psi | ASTM D638 |
Polikim EFALON® B-60 PTFE, 60% Bronze Filled Bronze-filled Efalon® (PTFE) has better heat insulation, less thermal expansion, higher wear resistance properties and less deformation under load compared to virgin Efalon®. Applications: bearing.. |
|||
Tensile Strength, Ultimate | 13.7 - 37.3 MPa | 1990 - 5400 psi | ASTM D638 |
Polikim EFALON® T-100 Virgin PTFE Applications: Gaskets, seals, O-rings, V-Rings, compression packings and similar sealing parts, Bushes, bearings and piston rings, Electrical insulators, Sliding supports, Conveyor belts, Coated tu.. |
|||
Tensile Strength, Ultimate | 13.7 MPa | 1990 psi | 500 mm/min (20 in./min.); ASTM D638, Type IV Specimen |
Eastman 1810E Polyethylene
(discontinued **) Polyethylene 1810E contains no additives. It is suggested for general purpose extrusion applications requiring good stress crack resistance or electrical properties. It is used in applications suc.. |
|||
Tensile Strength, Ultimate | 13.7 MPa | 1990 psi | |
Freudenberg Simrit V175 Aflasâ„¢ (TFE/P) Excellent resistance to acids, bases, water and amines. Widely used in oil fields. Avoid polar solvents and aromatic fuels. Compression set performance may be too high for some applications. Typical.. |
|||
Tensile Strength, Ultimate | 13.7 MPa | 1990 psi | Cured |
KKPC Kumho KHS 65 High Styrene Resin Masterbatch (HSR) High Styrene Resin Masterbatch (HSR)Characteristics: KOSYN KHS is produced by mixing SBR 1502 of 23.5% styrene and high styrene resin latex at high temperature. It works as plasticizer which improve.. |
|||
Tensile Strength, Ultimate | 13.7 MPa | 1990 psi | Cured |
KKPC Kumho KHS 65P High Styrene Resin Masterbatch (HSR) High Styrene Resin Masterbatch (HSR)Characteristics: KOSYN KHS is produced by mixing SBR 1502 of 23.5% styrene and high styrene resin latex at high temperature. It works as plasticizer which improve.. |
|||
Tensile Strength, Ultimate | 13.7 MPa | 1990 psi | Cured |
KKPC Kumho KHS 68 High Styrene Resin Masterbatch (HSR) High Styrene Resin Masterbatch (HSR)Characteristics: KOSYN KHS is produced by mixing SBR 1502 of 23.5% styrene and high styrene resin latex at high temperature. It works as plasticizer which improve.. |
|||
Tensile Strength, Ultimate | 13.7 MPa | 1990 psi | ASTM D412 |
Stellarchem SV-B87E TPV Compound This grade of Stellarchem SV series is a dynamic crosslinked, EPDM/PP compound. It's design to replace thermoset elastomers, such as EPDM, and traditional Thermoplastic TPVs. It can be process on .. |