Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | X direction; 0.1/min strain rate; ASTM D638 |
Rogers Corporation RT/duroid® 6010.2LM Ceramic-PTFE Composite Microwave Laminate Features:High dielectric constant for circuit size reductionLow loss - Ideal for operating at X-band or belowLow Z-axis expansion. Provides reliable plated through holes in multi-layer boardsTight .. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | |
3M Dyneon™ Fluorel™ FE-5623Q Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. The FE series O-ring grades are the c.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | |
3M Dyneon™ Fluorel™ FE-5660Q Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. The FE series O-ring grades are the c.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | |
3M Dyneon™ Fluorel™ FC-2174 Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. Excellent processability. Suggested .. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
ExxonMobil Escorene® LD-705 High EVA Film Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A fractional melt index, 13.3% vinyl acetate copolymer specialty film resin for applications requiring outstanding heat sealability, strength, and t.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
ExxonMobil Escorene® LD-760 High EVA Compounding Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A 27.5% vinyl acetate copolymer designed for specialty compounding applications. Excellent filler acceptance produces highly loaded concentrates.Ap.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
Huntsman PE1504 EVA Film Extrusion
(discontinued **) 5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: Fi.. |
|||
Tensile Strength, Ultimate | 17.0 - 216 MPa @Temperature -40.0 - 250 °C |
2470 - 31300 psi @Temperature -40.0 - 482 °F |
Average value: 86.6 MPa Grade Count:1 |
Overview of materials for Liquid Crystal Polymer (LCP), Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Liquid Crystal Polymer (LCP), Mineral Filled". Each property range of values reported is minimum and max.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
Solvay Specialty Polymers Algoflon® 25CAR+5CER PTFE; Petroleum Coke and Ceramic Filled
(discontinued **) Data provided by the manufacturer.25 wt.% Petroleum Coke + 5 wt.% Ceramic. Suspension polymer powder grade recommended for compression molding. Pure PTFE possesses high inertness, excellent dielectr.. |
|||
Tensile Strength, Ultimate | 17.0 MPa @Thickness 2.00 mm |
2470 psi @Thickness 0.0787 in |
ASTM D4894 |
3M Dyneon™ TF 4303 PTFE 15% Graphite Filled
(discontinued **) Type II PTFE. Applications include sliding surfaces, bearings, seals/gaskets.Data provided by Dyneon. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | Compounded Tire |
Polybutadiene Rubber (BR) |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | Compounded Tire |
Propylene Oxide Rubber (GPO) Allyl glycidyl ether is a common copolymer with propylene oxide. Good low temperature properties and oxidation/UV resistance but poor oil resistance. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | |
Ethylene Propylene Rubber (EPM, EPDM) Satisfactory compatibility with fireproof hydraulic fluids, ketones, hot and cold water, alkalis, and ozone/strong oxidizing chemicals. Unsatisfactory compatibility with most oils, gasoline, kerosen.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
LyondellBasell Astryn 75A6-2 Polypropylene Copolymer, 20% Calcium Carbonate Key Features: conventional melt flow, medium modulus, mineral-filled polypropylene copolymer, high impact, excellent chemical resistance, excellent aesthetics, high gloss, good colorability, good pr.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
LyondellBasell Astryn 75F4-2 Polypropylene Copolymer, 20% Talc Key Features: conventional melt flow, medium high modulus, mineral-filled polypropylene copolymer, excellent impact and stiffness balance, good colorability, good aestheticsApplications: small appli.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ISO R527-1 |
LyondellBasell Hifaxâ„¢ CJ232 Thermoplastic Olefin Resin Key Features: medium high melt flow, medium modulus, low CLTE, paintable thermoplastic elastomeric olefin resin, excellent impact and stiffness balance, good dimensional stability, paintableApplicat.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 341 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 395 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 341 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 395 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638/D412 |
Covestro Baydur® SFR-243 Polyurethane Composite RRIM Foam, 15% Milled Glass Filled, MDI-based 2-Component Liquid System 0.25 in. thickness.Information provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – C.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
Chem Polymer Chemlon 256 Nylon 6, Wire Jacketing Grade A non-halogenated, Allwires rated wire coating grade used primarily on cables for power and control circuits in commercial and industrial applications. The cables are oil, gasoline, and abrasion re.. |
|||
Tensile Strength, Ultimate | 17.0 - 30.1 MPa | 2470 - 4370 psi | Average value: 24.5 MPa Grade Count:6 |
Overview of materials for Linear Low Density Polyethylene (LLDPE), Rotational Molding Grade This property data is a summary of similar materials in the MatWeb database for the category "Linear Low Density Polyethylene (LLDPE), Rotational Molding Grade". Each property range of values report.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
Solvay Specialty Polymers Algoflon® 35CAR PTFE; Petroleum Coke and Graphite
(discontinued **) Data provided by the manufacturer.35 wt.% Petroleum Coke and Graphite. Suspension polymer powder grade recommended for compression molding. Pure PTFE possesses high inertness, excellent dielectric p.. |
|||
Tensile Strength, Ultimate | 17.0 - 148 MPa | 2470 - 21500 psi | Average value: 70.8 MPa Grade Count:72 |
Overview of materials for Nylon 6, Unreinforced, Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Unreinforced, Flame Retardant". Each property range of values reported is minimum and maximum v.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
ExxonMobil Escorene® LD-702 High EVA Film Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A fractional melt index, 13.3% vinyl acetate copolymer specialty film resin for applications requiring outstanding heat sealability, strength, and t.. |
|||
Tensile Strength, Ultimate | 17.0 - 26.5 MPa | 2470 - 3840 psi | Average value: 20.9 MPa Grade Count:19 |
Overview of materials for High Density Polyethylene (HDPE), Crosslinkable This property data is a summary of similar materials in the MatWeb database for the category "High Density Polyethylene (HDPE), Crosslinkable". Each property range of values reported is minimum and .. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | Compounded Tire |
Fluorocarbon Rubber (FPM), Low Temperature Grade Fluorocarbon rubbers are very stable toward degradation by chemicals, heat, and oxidation. Some chemicals that attack FPM include ketones, low molecular weight esters, and nitrogen containing solve.. |