Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 150 MPa | 21800 psi | Same value from ASTM and ISO tests; 5 mm/min. |
BASF Capron® GR20 HS 20% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron GR20 HS is a heat stabilized 20% glass reinforced polyamide 6 injection molding compound possessing a balance of engineering properties combined with excellent processability and surface aest.. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | ASTM data at 5 mm/min. |
BASF Capron® HPN 9333G Impact Modified, 33% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron HPN 9333G is a 33% glass reinforced, impact modified polyamide 6 injection molding compound combining exceptional strength, stiffness and high temperature performance with excellent surface a.. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | ASTM data at 5 mm/min. |
BASF Capron® HPN 9333G HS Impact Modified, 33% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron HPN 9333G HS is a heat stabilized, 33% glass reinforced, impact modified polyamide 6 injection molding compound combining exceptional strength, stiffness and high temperature performance with.. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | ASTM D638 |
Solvay Specialty Polymers Ryton® R-4 02 Polyphenylene Sulfide Compound
(Unverified Data**) Black Polyphenylene Sulfide CompoundRyton® R-4 02 is a 40% fiberglass reinforced polyphenylene sulfide compound which provides outstanding chemical resistance and mechanical properties even at elev.. |
|||
Tensile Strength, Ultimate | >= 150 MPa | >= 21800 psi | |
Hybrid Plastics Fireban® Mark VII Resorcinolinic (PRF) The resin system produces a superiour fire resistant material.Information provided by Hybrid Plastics |
|||
Tensile Strength, Ultimate | >= 150 MPa | >= 21800 psi | |
MetalTek Bearium® B-4 Bearing Bronze Exceptional frictional properties as a result of uniformly dispersed microstructure constituents.Applications: Turbine thrust bearings, centrifuge bushings, shaft sleeves, and other severe duty, mis.. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | |
ICE Al2O3 99.8 Data provided by the manufacturer, International Ceramic Engineering. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | ISO 527 |
Solvay Technyl® A 218 V35 Nylon 66, 35% Glass Fiber, EH50 Polyamides PA66, reinforced with 35% of glass fiber, heat stabilized, for injection molding.Technyl A 218 V35 is used in all sectors of industry, offering an excellent combination between thermal an.. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | |
Wieland 3005 Wilaform Silver Fine silver. Particularly suitable for minting or technical purposes.Applications: chains, coin/shape, laminar decoration, pipesDental |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | dry; ISO 527-1/-2 |
DSM Akulon® N24-G7 PA6-GF35 35% Glass Reinforced |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | dry; ISO 527-1/-2 |
DSM Akulon® Ultraflow K-FKGS6 /B PA6-GF30 FR(17) 30% Glass Reinforced, Heat Stabilized, Flame Retardant, High Flow |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | ISO 527-1/-2 |
DSM Arnite® AV2 370 XL-T PET-GF35 35% Glass Reinforced, Low Outgassing, Thermal conductive material |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | dry; ISO 527-1/-2 |
DSM EcoPaXX® Q-PG6 PA410-I-GF30 % Glass Reinforced, Impact Modified |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | dry; ISO 527-1/-2 |
DSM EcoPaXX® Q-X07208 PA410-I-GF30 % Glass Reinforced, Impact Modified |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | cond; ISO 527-1/-2 |
DSM Novamid® 1013G45 1 NA PA6-GF45 45% Glass Reinforced, Injection Molding |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | cond; ISO 527-1/-2 |
DSM Novamid® 1013GH45 1 NA/BK701 PA6-GF45 45% Glass Reinforced, Heat Stabilized, Injection Molding |
|||
Tensile Strength, Ultimate | 150 MPa @Temperature 120 °C |
21800 psi @Temperature 248 °F |
ISO 527-1/-2 |
DSM Stanyl® 46HF4550 PA46-GF50 50% Glass Reinforced, Heat Stabilized, High Flow, for E&E applications |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | cond; ISO 527-1/-2 |
DSM Stanyl® TW200B6 PA46-CF30 30% Carbon Reinforced, Heat Stabilized, Lubricated |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | |
China Tungsten STG10-15 PM Structural Parts Information provided by China Tungsten |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | |
China Tungsten STG30-15 PM Structural Parts Information provided by China Tungsten |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | 5mm/min; ISO 527 |
BASF Petra® 7030 GY6128 30% Glass Filled PET Petra 7030 GY6128 is a grey pigmented, high flow 30% glass fiber reinforced injection molding compound based on post-consumer and post-industrial recycled polyethylene terephthalate feedstock. It o.. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | 5mm/min; ISO 527 |
BASF Ultradur B 4040 G10 High Speed BK15029 50% Glass Filled PBT/PET Ultradur B 4040 G10 High Speed BK15029 is a high flow, fast cycling with low warpage, 50% glass filled, injection molding PBT for industrial parts, rigid tough and dimensional stable applications. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | 5 mm/min |
Arkema Group Rilsan® AZM 50 NOIR T6LD Nylon 12, 50% Glass Fiber Filled (Dry) Designation ISO 1874-PA12,MHLR,16-090,GF50Rigid grade with glass fiber (50%) for injection molding. Available color: black. Reinforced light and heat stabilizing agent. Mold-release agent.High rigid.. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | ASTM data at 5 mm/min. |
BASF Capron® 8333G HI Impact Modified, 33% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron 8333G HI is a 33% glass reinforced, impact modified polyamide 6 injection molding compound developed for applications requiring improved dry as molded toughness in combination with a balance .. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | ASTM data at 5 mm/min. |
BASF Capron® 8333G HI HS BK-102 Impact Modified, 33% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron 8333G HI HS BK-102 is a 33% glass reinforced, impact modified polyamide 6 injection molding compound pigmented black developed for applications requiring improved dry as molded toughness in c.. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | ASTM data at 5 mm/min. |
BASF Capron® SEG6 H1 BK-122 30% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron SEG6 H1 BK-122 is a black pigmented, 30% glass reinforced nylon 6 injection molding compound. This material is currently under development as XA-2678. It exhibits exceptional surface aesthet.. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | ASTM D638 |
Solvay Specialty Polymers Ixef® 1501/0003 Polyarylamide, 30% Glass Fiber, at Equilibrium (65% RH)
(discontinu The IXEF compounds are a family of semi-crystalline polyarylamide thermoplastics reinforced with glass fibers and/or mineral fillers for injection molding.Data provided by the manufacturer, Solvay A.. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | ASTM D638 |
Solvay Specialty Polymers Ixef® 2530/X9027 Polyarylamide, 55% Mineral + Glass Fiber, DAM
(discontinued **)< The IXEF compounds are a family of semi-crystalline polyarylamide thermoplastics reinforced with glass fibers and/or mineral fillers for injection molding.Data provided by the manufacturer, Solvay A.. |
|||
Tensile Strength, Ultimate | 150 MPa | 21800 psi | ASTM D638 |
Owens Corning Glass Fiber Reinforced Polyphenylene Sulfide, 40 wt.% glass Polyphenylene Sulfide provides excellent resistance to organic solvents (below 375°F). It is unaffected by strong alkalis or aqueous organic salt solutions. Data provided by the manufacturer, Owen.. |