Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | no post cure, press cured for 5 minutes; ASTM D412 |
Multibase SILASTIC® 7-6860 Dow-Corning Biomedical Grade Liquid Silicone Rubber Information provided by Multibase |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | |
3M Dyneon™ Fluorel™ FE-5730Q Fluoroelastomer VF2 + HFP + TFE Terpolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 69.2%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. 69.2% F grade terpolymer with good pe.. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | 500 mm/min (20 in./min.); ASTM D638, Type IV Specimen |
Eastman 1924P Polyethylene
(discontinued **) Low-density polyethylene 1924P is a resin in the boardstock coating industry for use in breadboard, cupstock, and liquid packaging board. This material has an excellent combination of low neck-in, .. |
|||
Tensile Strength, Ultimate | 10.0 - 182 MPa | 1450 - 26400 psi | Average value: 103 MPa Grade Count:57 |
Overview of materials for Acetal Copolymer, 30% Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, 30% Glass Fiber Reinforced". Specific grades with glass content between 25% and 34% ar.. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE1023 Film Extrusion Polyethylene
(discontinued **) Homopolymer, and FDA compliant.Features: Good draw down characteristics.Applications: Film extrusion: drum liners, hardware packaging, and refuse bags.FDA Notes: Conforms to FDA regulation 21 CFR 17.. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE1058 Film Extrusion Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Exceptional draw down and processability, excellent strength, good heat sealability, and optics.Applications: Film extrusion: all thin film uses and especiall.. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE1068 Film Extrusion Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Exceptional draw down and processability even to 1/2 mil; excellent strength, good heat sealability, and good optical.FDA Notes: Conforms to FDA regulation 21.. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE5030 Extrusion Coating Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Good draw down, low neck-in, good heat sealability and adhesion, low smoking, and excellent printabilityApplications: Extrusion: coating grade and general coa.. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE5032 Extrusion Coating Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Excellent draw down, low neck-in, excellent heat sealability, good adhesion, low smoking, no edge weave, and excellent printability.Applications: Extrusion: c.. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE5080 Extrusion Coating Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Excellent draw down, low neck-in, and excellent adhesion.Applications: Extrusion: coating grade and thin coatings.FDA Notes: Conforms to FDA regulation 21 CFR.. |
|||
Tensile Strength, Ultimate | 10.0 MPa @Temperature 120 °C |
1450 psi @Temperature 248 °F |
ISO 527 |
LATI LATILUB 73/13-20T Polyoxymethylene Base (POM), 10% Mixed PTFE Self Lubricating Plastic
(Unverified D Description: Latilub self-lubricating plastic materials are more and more often designed to replace metals in applications such as gears, bushings, cams, slides, etc), for which, besides their intri.. |
|||
Tensile Strength, Ultimate | 10.0 - 95.0 MPa @Temperature -20.0 - 100 °C |
1450 - 13800 psi @Temperature -4.00 - 212 °F |
Average value: 49.1 MPa Grade Count:1 |
Overview of materials for Nylon 66, Unreinforced, Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Unreinforced, Flame Retardant". Each property range of values reported is minimum and maximum .. |
|||
Tensile Strength, Ultimate | 10.0 - 95.0 MPa @Strain 1.00 - 3.00 % |
1450 - 13800 psi @Strain 1.00 - 3.00 % |
Average value: 49.1 MPa Grade Count:1 |
Overview of materials for Nylon 66, Unreinforced, Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Unreinforced, Flame Retardant". Each property range of values reported is minimum and maximum .. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | |
Sylvin Technologies 8915-60 Natural PVC Extrusion Compound Information provided by Sylvin Technologies Inc. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | |
Dow DOWLEX™ IP-60 High Density Polyethylene DOWLEX® IP-60 resin is an improved processing high density polyethylene resin designed to offer excellent processability, good impact and top load strength required in thin wall injection molding. .. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE2067 Injection Molding Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: High flow resin, provides excellent gloss and surface characteristics, and minimum cycle time.Applications: Injection molding: lids.FDA Notes: Conforms to FDA.. |
|||
Tensile Strength, Ultimate | 10.0 - 43.0 MPa | 1450 - 6240 psi | Average value: 21.4 MPa Grade Count:141 |
Overview of materials for High Density Polyethylene (HDPE), Injection Molded This property data is a summary of similar materials in the MatWeb database for the category "High Density Polyethylene (HDPE), Injection Molded". Each property range of values reported is minimum a.. |
|||
Tensile Strength, Ultimate | 10.0 - 30.0 MPa | 1450 - 4350 psi | Average value: 22.5 MPa Grade Count:11 |
Overview of materials for Polymethylpentene, Molded This property data is a summary of similar materials in the MatWeb database for the category "Polymethylpentene, Molded". Each property range of values reported is minimum and maximum values of appr.. |
|||
Tensile Strength, Ultimate | 10.0 - 135 MPa @Temperature 60.0 - 150 °C |
1450 - 19600 psi @Temperature 140 - 302 °F |
Average value: 68.8 MPa Grade Count:4 |
Overview of materials for Polyethersulfone (PES) This property data is a summary of similar materials in the MatWeb database for the category "Polyethersulfone". Each property range of values reported is minimum and maximum values of appropriate M.. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman Rexell® H2104 Injection Molding LLDPE
(discontinued **) Linear-low high density homopolymer, injection molding, FDA compliant.Features: High flow and short cycle times.Applications: Thin wall containers.FDA Notes: Conforms to FDA regulation 21 CFR 177.15.. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE2038 Injection Molding Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: High mechanical flexing properties, excellent processability, good stress crack resistance, and very good low temperature strength.Applications: Injection mol.. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE2053 Injection Molding Polyethylene
(discontinued **) Homopolymer, Drug Master File listed product, and FDA compliant.Features: High flow characteristics, good gloss, and processability.Applications: Injection molding: large moldings including housewar.. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE2062 Injection Molding Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: High flow characteristics combined with good glossApplications: Injection molding: large moldings including housewares and toys.FDA Notes: Conforms to FDA reg.. |
|||
Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D412 |
Multibase Multi-Flex® TPE A 5703 BLK Low AO The burn rate is 1.2 in/min (30 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Tensile Strength, Ultimate | 10.0 - 100 MPa @Temperature -20.0 - 100 °C |
1450 - 14500 psi @Temperature -4.00 - 212 °F |
Average value: 45.0 MPa Grade Count:2 |
Overview of materials for Nylon 6, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Unreinforced". Each property range of values reported is minimum and maximum values of appropri.. |
|||
Tensile Strength, Ultimate | 10.0 - 163 MPa @Temperature -40.0 - 150 °C |
1450 - 23600 psi @Temperature -40.0 - 302 °F |
Average value: 69.4 MPa Grade Count:8 |
Overview of materials for Nylon 6, 20% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, 20% Glass Fiber Filled".Specific grades with glass content between 15% and 24% are included. Ea.. |
|||
Tensile Strength, Ultimate | 10.0 - 65.0 MPa | 1450 - 9430 psi | Average value: 23.8 MPa Grade Count:133 |
Overview of materials for Polypropylene, Mineral Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Mineral Reinforced". Each property range of values reported is minimum and maximum values.. |