Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ISO 527 |
Premix Thermoplastics PRE-ELEC® PE 1294 PRE-ELEC PE 1294 is a conductive thermoplastic compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC PE 129.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | |
3M Dyneon™ Fluorel™ FC-2145 Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, 4% Ca(OH)2, 1.4% Dihydroxy Crosslinker, 0.4% Phosp.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | 500 mm/min (20 in./min.); Type IV Specimen; ASTM D638 |
Eastman 800A Polyethylene
(discontinued **) Polyethylene 800A is a general-purpose low density formulation used for injection molding applications that require good stress-crack resistance. Polyethylene 800E is used in general-purpose extrus.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | 500 mm/min (20 in./min.); Type IV Specimen; ASTM D638 |
Eastman 800E Polyethylene
(discontinued **) Polyethylene 800E is used in general-purpose extrusion applications that also require good stress resistance. This formula complies with FDA regulations at 21 CFR177.1520 (c)(2.2) for use in articl.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE1037 Film Extrusion Polyethylene
(discontinued **) Homopolymer, and FDA compliant.Features: Medium clarity packaging film and good draw down characteristics.Applications: Film extrusion: general purpose packaging and film applications.FDA Notes: Con.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE5020 Extrusion Coating Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: High draw down, low neck-in, excellent heat sealability, and excellent adhesion.Applications: Extrusion: coating grade and thin coatings.FDA Notes: Conforms t.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE5050 Extrusion Coating Polyethylene
(discontinued **) Homopolymer, Drug Master File listed product, and FDA compliant.Features: High draw down, low neck-in, excellent heat sealability, and excellent adhesion.Applications: Extrusion: coating grade and t.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE7018 Profile Extrusion Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Excellent strength, good machinability, and foaming characteristics.Applications: Extrusion: profile extrusion.FDA Notes: Conforms to FDA regulation 21 CFR 17.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
ExxonMobil Escorene® LD-721 High EVA Coextrusion Film Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A high vinyl acetate copolymer specialty film resin providing outstanding heat sealability along with excellent strength, properties and clarity.App.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE1903 EVA Film Extrusion
(discontinued **) 9% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent toughness and flexibility at low temperatures, and good heat-seal response.Applications: Film extrusion: laminating film, controll.. |
|||
Tensile Strength, Ultimate | 12.0 - 37.0 MPa | 1740 - 5370 psi | Average value: 26.8 MPa Grade Count:212 |
Overview of materials for Polypropylene with 20% Talc Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 20% Talc Filler".Specific grades with primary filler content between 15% and 24% are .. |
|||
Tensile Strength, Ultimate | 12.0 - 714 MPa | 1740 - 104000 psi | Average value: 124 MPa Grade Count:86 |
Overview of materials for Polyvinylidinefluoride (PVDF), Molded/Extruded This property data is a summary of similar materials in the MatWeb database for the category "Polyvinylidinefluoride (PVDF), Molded/Extruded". Each property range of values reported is minimum and m.. |
|||
Tensile Strength, Ultimate | 12.0 MPa @Thickness 2.00 mm |
1740 psi @Thickness 0.0787 in |
ASTM D4894 |
3M Dyneon™ TFM™ 4212 Modified PTFE, 10% Electrocarbon Filled
(discontinued **) Applications include bearings, seals/gaskets, packings, piston rings.Data provided by Dyneon. |
|||
Tensile Strength, Ultimate | 12.0 MPa @Temperature 22.0 °C |
1740 psi @Temperature 71.6 °F |
25mm flat samples, compression moulded; ISO 527-4 |
Menzolit Menzolit® MMC 1600 Unsaturated Polyester UP MMC 1600 is a mineral moulding compound (similar to DMC/BMC) providing of a stone like appearance eg. granite or marble. Chrome plated mould surfaces are required. It is recommended that product thi.. |
|||
Tensile Strength, Ultimate | 12.0 - 25.0 MPa | 1740 - 3630 psi | 50mm/min; ASTM D638 |
Micropol Microlink XL Crosslinkable Polyethylene Characteristics: exceptional toughness, exceptional enviromental stress cracking resistance, outstanding low temperature impact resistance down to -40°C, fully stabilized for outdoor use world wi.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D412 |
Multibase Multi-Flex® TPE A 3104-10 AGATE 5ES The material is based on Kraton G rubber. It has been engineered for single shot. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
LyondellBasell Astryn BB725GC Polypropylene Copolymer, Mineral Filled Key Features: medium melt flow, medium high modulus, UV-stabilized, mineral-filled polypropylene copolymer, excellent impact and stiffness balance, good processability, good weatherability,Applicati.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | 20 in/min; ASTM D412 (dumbbells) |
DuPont Performance Polymers Kalrez® 8575 FFKM Perfluoroelastomer Kalrez® Sahara™ 8575 is specially formulated for improved performance in etching, ashing and stripping processes, offers lower cost of ownership with reduced contamination and longer seal life. Th.. |
|||
Tensile Strength, Ultimate | 12.0 - 30.0 MPa | 1740 - 4350 psi | |
ATG s.r.l. IR Synthetic Polyisoprene |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE1078 Film Extrusion Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Yields film with high clarity and excellent stiffness.Applications: Film extrusion: overwrap packaging.FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Westlake EMAC® SP 1205 Ethylene-Methyl Acrylate Copolymer
(discontinued **) 20% Methyl Acrylate Content. Characteristics: Processing Temperature Range: 280-600°F, Less Crystalline and Softer than Polyethylene, Excellent Thermal Stability Allows Extrusion Processing up to .. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE1335 EVA Film Extrusion
(discontinued **) 3.3% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: .. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE1345 EVA Film Extrusion
(discontinued **) 3.4% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: .. |