Polymer Property : Ball Indentation Hardness = 60.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	60.0 MPa @Load 36.5 kg	8700 psi @Load 80.5 lb	cond.; ISO 2039-1
Azoty Tarnow™ Tarnamid® T-27 MS Polyamide 6 - Natural Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.For uncolored parts produced by injection molding, contain including and demo..
Ball Indentation Hardness	60.0 MPa @Load 36.5 kg	8700 psi @Load 80.5 lb	cond.; ISO 2039-1
Azoty Tarnow™ Tarnamid® T-27 Polyamide 6 - Natural Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following main properties:High mechanical strength, rigidi..
Ball Indentation Hardness	60.0 MPa @Load 36.5 kg	8700 psi @Load 80.5 lb	cond.; ISO 2039-1
Azoty Tarnow™ Tarnamid® T-29 MS Polyamide 6 - Natural Medium-high viscosity extrusion grade for mono or multilayer blown film, including biaxial oriented films, also for production of monofilament; can be used for injection molding and compounding.For ..
Ball Indentation Hardness	60.0 MPa @Load 36.5 kg	8700 psi @Load 80.5 lb	cond.; ISO 2039-1
Azoty Tarnow™ Tarnamid® T-29 Polyamide 6 - Natural Medium-high viscosity extrusion grade for mono or multilayer blown film, including biaxial oriented films, also for production of monofilament; can be used for injection molding and compounding.Tarn..
Ball Indentation Hardness	60.0 MPa @Load 36.5 kg	8700 psi @Load 80.5 lb	cond.; ISO 2039-1
Azoty Tarnow™ Tarnamid® T-30 Polyamide 6 - Natural High viscosity extrusion grade for blown and flat films, including biaxial oriented films, also for extrusion of rods, pipes, plates, sheets, low diameter tubes and for injection molding of thick-wa..
Ball Indentation Hardness	60.0 MPa @Load 36.5 kg	8700 psi @Load 80.5 lb	cond.; ISO 2039-1
Azoty Tarnow™ Tarnamid® T-30 MS Polyamide 6 - Natural High viscosity extrusion grade for blown and flat films, including biaxial oriented films, also for extrusion of rods, pipes, plates, sheets, low diameter tubes and for injection molding of thick-wa..