Polymer Property : Elmendorf Tear Strength, MD = 15.7 g/micron Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	Blown Film at 1 mil; ASTM D-1922
Chevron Phillips MarFlex® 7105DL Polyethylene; LLDPE (discontinued **) Hexene linear low density polyethylene. This LLDPE is tailored for blown film applications that require: High strengthGood drawdownGood processabilityUse alone or in blends with LDPE or HDPEHigh a..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	Blown Film at 1 mil; ASTM D-1922
Chevron Phillips MarFlex® 7105FL Polyethylene; LLDPE (discontinued **) Hexene linear low density polyethylene. This LLDPE is tailored for blown film applications that require: High strengthGood drawdownGood processabilityUse alone or in blends with LDPE or HDPEHigh a..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	Notched; ASTM D1922
Chevron Phillips MarFlex® 7109L LLDPE Blown Film Resin (discontinued **) Resin Type: linear low density polyethylene, hexene copolymerCharacteristics: good stiffness at thin gauges, good drawdown, excellent processability, can use straight or in blends with LDPE or HDPE,..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	Notched; ASTM D1922
Chevron Phillips 7109CLT LLDPE Blown Film Resin, Hexene Copolymer (discontinued **) Resin Type: Hexene Copolymer, High Slip, Very High Antiblock Version of 7109T, Cast/Blown Film ResinCharacteristics: Good Stiffness at Thin Gauges, Good Drawdown, Can be used straight or blended wit..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	ASTM D1922
Huntsman Rexell® V8801 Cast Film Extrusion LLDPE (discontinued **) Linear-low very low density copolymer, blown film extrusion, FDA compliantFeatures: Excellent resistance to impact, puncturing, tearing, and flex cracking with good weld seal strength, hot tack, and..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	ASTM D1922
ExxonMobil Escorene® LD-108 LDPE Packaging Film Resin, High Clarity (discontinued **) Data provided by the manufacturer, Exxon Chemical.A homopolymer high clarity film resin with a good balance of toughness, stiffness, and drawdown capability. This resin has good machinability in ba..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	ASTM D1922
SCG Chemicals EL-Leneâ„¢ LD1905F Low Density Polyethylene Film Key Characteristics:High productivityGood optical propertiesCan be blended with HDPE, LLDPEContains 1500 ppm slip agent and 2600 ppm antiblocking agentRecommended Applications:General purpose bagVeg..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	ASTM D1922
SCG Chemicals EL-Leneâ„¢ LD1905FA Low Density Polyethylene Film Key Characteristics:High productivityGood optical propertiesCan be blended with HDPE and LDPE to improve tear resistance and seal strengthContains 1000 ppm slip agent and 700 ppm antiblocking agentR..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	ASTM D1922
SCG Chemicals EL-Leneâ„¢ LD2305F Low Density Polyethylene Film Key Characteristics:Excellent clarity and glossGood zip formationContains 1000 ppm slip agent and 500 ppm antiblocking agentRecommended Applications:Zip bagsGeneral purpose film for food packagingIn..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	ASTM D1922
Formosa Plastics Formolene® L62009A Film (Hexene Grade) LLDPE Hexene Copolymer (High Antiblock)Applications: Blown film applications that don’t require slip.Blown film applications that don’t require slip.Meets all requirements of the U.S. Food and Drug Admi..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	ASTM D1922
Formosa Plastics Formolene® L62009E2 Film (Hexene Grade) LLDPE Hexene Copolymer (High slip and antiblock)Applications: Blown film, general purpose filmBlown film, general purpose filmMeets all requirements of the U.S. Food and Drug Administration as specified i..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	ASTM D1922
Formosa Plastics Formolene® L62009H Film (Hexene Grade) LLDPE Hexene Copolymer (Barefoot)Applications: Higher AO package for cast and stretch filmHigher AO package for cast and stretch filmMeets all requirements of the U.S. Food and Drug Administration as spec..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	ASTM D1922
Formosa Plastics Formolene® L62009B Film (Hexene Grade) LLDPE Hexene Copolymer (Barefoot)Applications: Blown filmBlown filmMeets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	ASTM D1922
Formosa Plastics Formolene® L62009X Film (Hexene Grade) LLDPE Hexene Copolymer (Barefoot)Applications: Cross laminated filmCross laminated filmMeets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	Notched; ASTM D1922
Chevron Phillips MarFlex® 7109DL LLDPE Blown Film Resin Resin Type: linear low density polyethylene, hexene copolymerCharacteristics: good stiffness at thin gauges, good drawdown, excellent processability, can use straight or in blends with LDPE or HDPE,..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	Notched; ASTM D1922
Chevron Phillips MarFlex® 7109M LLDPE Blown Film Resin Resin Type: linear low density polyethylene, hexene copolymerCharacteristics: good stiffness at thin gauges, good drawdown, excellent processability, can use straight or in blends with LDPE or HDPE,..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	ASTM D1922
Huntsman Rexell® V8403 Cast Film Extrusion LLDPE (discontinued **) Linear-low very low density copolymer, blown film extrusion, FDA compliantFeatures: Excellent resistance to impact, puncturing, tearing, and flex cracking with good weld seal strength, hot tack, and..
Elmendorf Tear Strength, MD	15.7 g/micron	400 g/mil	Notched; ASTM D1922
Chevron Phillips MarFlex® 7109CL LLDPE Blown Film Resin (discontinued **) Resin Type: linear low density polyethylene, hexene copolymerCharacteristics: good stiffness at thin gauges, good drawdown, excellent processability, can use straight or in blends with LDPE or HDPE,..