Polymer Property : Tensile Modulus = 94.3 ksi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Modulus	0.650 GPa	94.3 ksi	ISO 527-1/-2
Quadrant EPP TIVAR® Dryslide PE-UHMW + internal lubricant + other additives (ISO Data) Thanks to the lubricant built into a PE-UHMW matrix with higher molecular weight, TIVAR DrySlide offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR 1000. The..
Tensile Modulus	>= 0.650 GPa	>= 94.3 ksi	2% sec, TD; ASTM D882
NIZHNEKAMSKNEFTEKHIM PE 6148C (486H3) High Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
Tensile Modulus	0.650 GPa	94.3 ksi
Radici Radilon® S 40EP3215 (dry) Nylon 6 Radilon® S is a range of polyamide 6 (PA6) products obtained through the polymerization of caprolactam and used for injection, extrusion and blow-molding.Information provided by Radici group.
Tensile Modulus	0.650 GPa	94.3 ksi	ASTM D638
3M Dyneon™ TFM™ 1705 Modified PTFE Powder (discontinued **) Type II, gr. 1 PTFE. Dyneon™ TFM™ 1705 PTFE is a second-generation modified polytetrafluoro-ethylene (PTFE) that maintains the exceptional chemical and heat resistance properties of first-generat..
Tensile Modulus	0.650 GPa	94.3 ksi	ASTM D638
3M Dyneon™ TFM™ 1600 Modified PTFE Powder (discontinued **) Type III, gr. 2 PTFE. Dyneon TFM 1600 PTFE is a free-flowing powder for compression molding, isostatic molding, automatic molding, and ram extrusion. Dyneon™ TFM™ 1600 PTFE is a second-generatio..
Tensile Modulus	0.650 GPa	94.3 ksi	Sintered Molding, DIN 53457
3M Dyneon™ TFM™ 1605 Modified PTFE Powder (discontinued **) Type III, gr. 2 PTFE. Second-generation PTFE that is a chemically modified to allow new designs and processing methods. Very good free-flowing powder properties.Data provided by Dyneon.
Tensile Modulus	0.650 GPa	94.3 ksi	MD; ASTM D882
Honeywell Aegisâ„¢ H155ZP Nylon 6 Extrusion Grade Homopolymer Film Description: Aegis H155ZP is a high viscosity, nylon 6 film extrusion grade homopolymer for cast or blown film. It conforms to Food and Drugs Administration requirements of 21 CFR 177.1500 as well a..
Tensile Modulus	0.650 - 0.850 GPa	94.3 - 123 ksi	MD/TD; ISO 527-3
Borealis Bormed™ TD109CF Polypropylene Copolymer Bormed™ TD109CF is a propylene alpha olefin copolymer. This grade is suitable for the manufacturing of unoriented films on cast and tubular quench film lines. Applications: lamination films, food..
Tensile Modulus	0.650 GPa	94.3 ksi	TD; ASTM D882-A
Borealis Borstar® FB1350 Medium Density Polyethylene Borstar® FB1350 is a linear medium density polyethylene grade combining excellent extrusion properties with high film stiffness. Borstar® FB1350 is well suited for mono- and coextrusion of films ..
Tensile Modulus	0.650 - 0.750 GPa	94.3 - 109 ksi	ISO 527-3
Borealis HD204CF Polypropylene HD204CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process. Applications: HD204CF is recommended for medical applications, inner layer in co extru..
Tensile Modulus	0.650 - 0.750 GPa	94.3 - 109 ksi	MD/TD; ISO 527-3
Borealis HD244CF Polypropylene HD244CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process. Applications: food packaging, lamination films, stationery folders, multi layer co-extr..
Tensile Modulus	0.650 - 0.750 GPa	94.3 - 109 ksi	MD/TD; ISO 527-3
Borealis HD601CF Polypropylene HD601CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process. Applications: metallisable cast film, inner layer in co extrusion, textile packaging fil..
Tensile Modulus	0.650 - 0.750 GPa	94.3 - 109 ksi	MD/TD; ISO 527-3
Borealis HD621CF Polypropylene HD621CF is a polypropylene homopolymer This grade is suitable for the manufacturing of unoriented films on cast and tubular quench film lines. Applications: food packaging, lamination films, statio..
Tensile Modulus	0.650 GPa	94.3 ksi	ASTM D638
Elastomer Engineering Elastamide 200 Elastomer Modified RIM Nylon 6 26% crystallinity. Information supplied by Elastomer Engineering.
Tensile Modulus	0.650 GPa	94.3 ksi
Covestro Baydur® GS PIR A Polyurethane PIR casting system for the production of solid components. Mechanical properties can be varied by adjusting the mixing ratio in the range 1:1-1:2.Information provided by Bayer.As of 1 September 2015..
Tensile Modulus	0.650 GPa	94.3 ksi	dry; ISO 527-1/-2
EMS-Grivory Grivory® BRZ 247 W PA6 Product description: Grilon BRZ 247 W is a heat stabilized, high viscosity, impact modified and plasticized PA6 extrusion grade. Grilon BRZ 247 W has the following important properties: High flexibi..
Tensile Modulus	0.650 GPa @Temperature 160 °C	94.3 ksi @Temperature 320 °F	ISO 527-1/-2
DSM Stanyl® TS300 PA46
Tensile Modulus	0.650 GPa @Temperature 160 °C	94.3 ksi @Temperature 320 °F	ISO 527-1/-2
DSM Stanyl® TW341-B PA46 Heat Stabilized, Lubricated
Tensile Modulus	0.650 GPa @Temperature 160 °C	94.3 ksi @Temperature 320 °F	ISO 527-1/-2
DSM Stanyl® TW341-J PA46 Heat Stabilized, Lubricated
Tensile Modulus	0.650 GPa @Temperature 160 °C	94.3 ksi @Temperature 320 °F	ISO 527-1/-2
DSM Stanyl® TW341-N PA46 Heat Stabilized, Lubricated
Tensile Modulus	0.650 GPa	94.3 ksi	dry; ISO 527-1/-2
EMS-Grivory Grivory® L 20 W 20 grey 9280 PA12 Product Description: Grilamid L 20 W 20 grey 9280 is a semiflexible plasticized medium viscosity polyamide 12 (PA12) extrusion grade. Grilamid L 20 W 20 grey 9280 is heat stabilized. The main featur..
Tensile Modulus	0.650 GPa	94.3 ksi	dry; ISO 527-1/-2
EMS-Grivory Grivory® L 20 W 20 PA12 Product Description: Grilamid L 20 W 20 is a semi-flexible plasticized medium viscosity polyamide 12 (PA12) extrusion grade. Grilamid L 20 W 20 is heat stabilized. The main features of Grilamid L 20..
Tensile Modulus	0.650 GPa @Temperature 23.0 °C	94.3 ksi @Temperature 73.4 °F	ISO 527
DuPont Performance Polymers Hytrel® BM6574 BK316 TPC-ET (Unverified Data**) Hytrel® BM6574 is a 65 nom. Shore D, plasticiser free high performance resin for blow molding and extrusion; it shows ageing resistance up to 150°C, and excellent mechanical properties at elevated..
Tensile Modulus	0.650 GPa	94.3 ksi	1 mm/min
Arkema Group Orgalloy® LT 6040IH Nylon (Conditioned) ISO data provided by the manufacturer, Arkema.
Tensile Modulus	0.650 GPa	94.3 ksi	MD
BASF Ultramid® B36 LN 0.04 mm Cast Film Cold Chillroll Product comes in 2-2.5 mm round pellets.Information provided by BASF
Tensile Modulus	0.650 GPa	94.3 ksi	ASTM D638
3M Dyneon™ TFM™ 1700 Modified PTFE Powder Type III, gr. 1 PTFE. Dyneon™ TFM™ 1700 PTFE is a second-generation modified polytetrafluoro-ethylene (PTFE) that maintains the exceptional chemical and heat resistance properties of first-genera..
Tensile Modulus	0.650 - 0.750 GPa	94.3 - 109 ksi	MD/TD; ISO 527-3
Borealis HD214CF Polypropylene Homopolymer HD214CF is a homopolymer film resin, suitable for the manufacturing of unoriented film on chill roll process. Applications: food packaging, lamination films, stationary films, multi layer co-extrus..
Tensile Modulus	0.650 GPa	94.3 ksi	ASTM D638
Azdel SuperLite® SL551200-100 PP Resin Matrix / 55% Glass Fiber (7 mm Molded Thickness) AZDEL SuperLite® SL551200-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic..
Tensile Modulus	0.650 GPa @Temperature 160 °C	94.3 ksi @Temperature 320 °F	ISO 527-1/-2
DSM Stanyl® TE300 PA46 Heat Stabilized
Tensile Modulus	0.650 GPa	94.3 ksi	conditioned; ISO 527-1/-2
EMS-Grivory Grivory® BM 20 SBG PA* Product description: Grilon BM 20 SBG is a lactam free multipolyamide. Grilon BM 20 SBG has the following features: Lactam freeGood transparency and glossGood flexibility and toughnessVery good ther..