Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Modulus | 16.0 GPa | 2320 ksi | |
Plastcom SLOVAMID 66 GF 45 PA66, 45% glass fibre FeaturesChemically reinforced with 45% glass fibre, suitable for mouldings with high strength and toughness also at minus temperatures. Used in the automotive, engineering and electrical industry. W.. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
Nilit FRIANYL A63 H-GV50 Nylon 6.6 for injection molding, 50% glass fiber reinforced Nylon 6.6 for injection moldingInformation provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
Grupo Repol Dinalon® A1S25 G50 PA66 50% Glass Fiber Mechanical properties for Dry As Molded samplesInformation provided by Grupo Repol |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527-1/-2 |
Lanxess Durethan® BKV 50 H2.0 EF 000000 Nylon 6, 50% Glass Fiber PA 6, injection molding grade, 50% glass fibers, good heat-ageing resistance, low viscosity (easy flow) |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | d.a.m.; ISO 527-1, -2; 1 mm/min |
Lanxess Durethan® BKV 50 H2.0 EF DUS30 901510 Nylon 6, Glass Fiber Reinforced PA 6, 50% glass fibers, injection molding, improved flowability, heat-aging stabilizedInformation provided by LANXESS. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527-1, -2; 1 mm/min |
Lanxess Pocan® ECO T 3240 000000 PBT + PET, 45% Glass Fiber PBT + PET, 45% glass fibers, injection molding, improved surface finish, contains 25% post-consumer recycled material, increased temperature peak loadInformation provided by LANXESS. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
A. Schulman SCHULAMID® 66 GF50 50% Glass Fiber Reinforced 66 Information provided by A. Schulman. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
A. Schulman SCHULAMID® 66 GF50 50% Glass Fiber Reinforced 66 Information provided by A. Schulman. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
A. Schulman SCHULAMID® 6 GF50H 50% Glass Fiber Reinforced Nylon 6 Information provided by A. Schulman. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
A. Schulman SCHULAMID® 66 GF50 50% Glass Fiber Reinforced 66 Information provided by A. Schulman. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
A. Schulman SCHULAMID® 66 GF50H 50% Glass Fiber Reinforced, Heat Stabilized 66 Information provided by A. Schulman. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
A. Schulman SCHULAMID® 6 GF50H 50% Glass Fiber Reinforced Nylon 6 Information provided by A. Schulman. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
A. Schulman SCHULAMID® 66 GF50H 50% Glass Fiber Reinforced, Heat Stabilized 66 Information provided by A. Schulman. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
A. Schulman SCHULAMID® 66 GF50H 50% Glass Fiber Reinforced, Heat Stabilized 66 Information provided by A. Schulman. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
A. Schulman SCHULAMID® 66 GF50H 50% Glass Fiber Reinforced, Heat Stabilized 66 Information provided by A. Schulman. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | 90º, RT, Dry; EN2561 |
Hexcel® HexPly® M12 135°C Curing Epoxy Matrix, TVR380/26% Fiber Information provided by HexCel |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | dry; ISO 527-1/-2 |
DSM Stanyl® 46HF4550 PA46-GF50 50% Glass Reinforced, Heat Stabilized, High Flow, for E&E applications |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
CP-Polymer-Technik Wellamid® 6000 CF 30 HWCP 30% Carbon Fiber Nylon 6, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | dry; ISO 527-1/-2 |
DSM Stanyl® TW278F10 (PA46+PTFE)-GF50 50% Glass Reinforced, Heat Stabilized, Wear and Friction Modified |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | conditioned; ISO 527-1/-2 |
EMS-Grivory Grivory® GVS-5H nat PA*-GF50 Product description: Grivory GVS-5H natural is a 50% glass-fiber reinforced engineering thermoplastic material based on a combination of semicrystalline polyamide with partially aromatic copolyamide.. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | dry; ISO 527-1/-2 |
EMS-Grivory Grivory® HT2V-45H PA6T/66-GF45 Grivory HT2V-45H is a 45% glass fiber reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamide. Polymer designation acc. to ISO: PA 6T/66 Acc. to AST.. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | conditioned; ISO 527-1/-2 |
EMS-Grivory Grivory® XE 4065 black 9238 PA*-GF50 Product description: Grivory XE 4065 is a 50% glass-fiber reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamide. This Grivory HT product is partia.. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527 |
Eurotec® Tecodur® PB70 GR45 NL100 HS01 PBT/PET, 45% glass fiber reinforced, heat stabilized, natural Information provided by Eurotec® |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | 1 [mm/min]; ISO 527-2/1 |
Akro-Plastic Akromid® B3 GF 50 9 RM-M (3147) PA 6 Dry, 50% Glass Filled In all, the construction relevant features show that the significantly reduced moisture absorption of AKROMID B3 GF 30 RM leads to increasing rigidities and strengths as already expected. Neverthele.. |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527-1/-2 |
DuPont Performance Polymers Sorona® 2045G BK346A Polytrimethylene Terephthalate (PTT)
(Unverified Data**) 45% Glass Reinforced Polytrimethylene TerephthalateInformation provided by DuPont Performance Polymers |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | ISO 527-2 |
Solvay Specialty Polymers Amodel® AS-1145 HS Polyphthalamide (PPA)
(Unverified Data**) Amodel AS-1145 HS is a 45% glass reinforced heat stabilized polyphthalamide (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses greater than 0... |
|||
Tensile Modulus | 16.0 GPa | 2320 ksi | Longitudinal; ASTM D638 |
Sawbones Fourth-Generation Simulated Cortical Bone (Short Fiber Filled Epoxy) Fourth-generation bones model natural cortical bone using a mixture of short glass fibers and epoxy resin pressure injected around a foam core. Standard bone models are manufactured with a solid rig.. |