Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM D638 |
NYCOA 436 PA 6 NSF rated general purpose molding gradeInformation provided by NYCOA, Inc. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM D638 |
Nylene® 607 Nylon 6, Extrusion Grade Dry as molded. Extrusion grade. Nylene 607 is a very high viscosity extrusion resin having an ASTM relative viscosity of 800. Nylene 607 has excellent structural strength, durability, and physica.. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | |
Radici Radilon® A RV150 (cond.) Nylon 66 Radilon® A is a range of polyamide 66 (PA66) products obtained through the polymerization of hexamethylendiamine and adipic acid, and used for injection, extrusion and blow-molding.Information prov.. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ISO 527-1,-2 |
Lanxess Durethan® B 40 SK 000000 Nylon 6 PA 6, non-reinforced, injection molding |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | d.a.m.; ISO 527-1, -2; 50 mm/min |
Lanxess Durethan® A 30 S FN31 000000 Nylon 66, Flame Retardant PA 66, non-reinforced, injection molding, halogen-free flame retardant, improved flowabilityInformation provided by LANXESS. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP EX00548C PEI LNP LUBRICOMP* EX00548C is a compound based on Polyetherimide resin containing Proprietary Fillers. Added features of this material include: Clean Compounding System, Wear Resistant. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM D638 |
Solvay TECHNYL® B 50 H1 PA66/6, DRY Description: TECHNYL® B 50H1 is an unreinforced melamine cyanurate flame retarded copolyamide 66/6. This product has been heat stabilized and is suitable for injection molding. This product is av.. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL NH7112 PPE+HIPS Noryl* NH7112 resin is a 10% glass reinforced, modified PPE-PS blend. The material offers an exceptional balance of strength and dimensional stability while using non-halogenated flame retardants to.. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL NH7112 PPE+HIPS (Europe-Africa-Middle East) Noryl* NH7112 resin is a 10% glass reinforced, modified PPE-PS blend. The material offers an exceptional balance of strength and dimensional stability while using non-halogenated flame retardants to.. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics Valox® SHF4930 PBT (Europe-Africa-Middle East) Super high flow FR PBT grade with 15% Glass reinforced |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM-D638 |
Polyram PlusTek PA604 Nylon 6.6, Heat Stabilized High heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ISO 527 |
A. Schulman FORMION™ FI 225 30% Glass Fiber Reinforced Ionomer / Nylon Alloy DescriptionFormion® FI 225 is an injection molding grade, 30% glass fiber reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness.. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM-D638 |
Polyram PlusTek RA601 Nylon 6.6, Heat Resistant Heat resistant polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ISO 527 |
A. Schulman FORMION™ FI 225 30% Glass Fiber Reinforced Ionomer / Nylon Alloy DescriptionFormion® FI 225 is an injection molding grade, 30% glass fiber reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness.. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM-D638 |
Polyram PlusTek PA100 Nylon 6.6, General Purpose General purpose polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM-D638 |
Polyram PlusTek PB350M4 Nylon 6, 20% Mineral Filled 20% mineral filled polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ISO 527-1/-2 |
DSM Akulon® F223-D (Dry) Low/Medium Viscosity Nylon 6 (North America) Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis.. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | dry; ISO 527-1/-2 |
DSM Akulon® F-X9183 PA6 Low/Medium Viscosity |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | chs 0.2 in/min; ASTM D638 |
Diamond Polymers NPP30-0500 GF30 BLACK HOMOPOLYMER 30% Glass Filled Black Homopolymer Polypropylene Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | 50 mm/min; ISO 527 |
Eurostar Staramide A28 PA66, Injection Molding Staramide A28 is an Unreinforced, Polyamide 66, Injection Molding ResinInformation provided by Eurostar. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM D638 |
E-Polymers TEKAMID® TA210L Lubricated PA66, DAM LubricatedInformation provided by E-Polymers Co. Ltd. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | DAM; ISO 527-1/-2 |
DuPont Performance Polymers Zytel® 103FHS NC010 Nylon 66
(Unverified Data**) Unreinforced Heat Stabilized Polyamide 66 Zytel 103FHS NC010 is a heat stabilized internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivi.. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM D638 |
E-Polymers TEKAMID® TA210F Fast Crystallinity PA66, DAM Fast crystallinityInformation provided by E-Polymers Co. Ltd. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | 50 [mm/min], Test Speed 50 [mm/min]; ISO 527-1/2 |
Akro-Plastic Akromid® B3 (2500) PA 6 Dry AKROMID® B (Polyamide 6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperatur.. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ISO 527-2 |
Ascend Performance Materials Vydyne® 66J Nylon 66, General Purpose, high viscosity, DAM Vydyne® 66J is a high-viscosity, heat-stabilized PA66 resin suitable for injection-molding and extrusion applications. It is available in natural color only. Vydyne 66J resin offers high strength, .. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM D638 |
Ashley Polymers Ashlene® 538 Nylon 66 A general purpose high viscosity extrusion grade Nylon 66.Data provided by the manufacturer |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | 50 mm/min; ISO 527-1/-2 |
BASF Ultramid® A4H PA66 (Dry) Description: Highly heat aging resistant, medium-viscosity injection-molding grade for highly stressed parts such as bearing cages, gearwheels, spool bodies and chain drive tensioners.Information pr.. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | 50mm/min; ISO 527-1/-2 |
BASF Ultrason® E 2010 MR HP PESU Description: Unreinforced, medium viscosity standard injection molding grade for improved demolding behavior with Mold Release. PES-Blend with improved processibility. (High Productivity) Abbreviate.. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | ISO R 527 |
Addiplast Addinyl PMD 20104 Nylon 66 High molding rateInformation provided by Addiplast. |
|||
Tensile Strength, Yield | 85.0 MPa | 12300 psi | v = 50 mm/min; ISO 527-2 |
CENTROPLAST CENTROLEN PP GF 30 Polypropylene 30% glass fiber This material is a low density, easily machined plastic that has high impact resistance and dimensional stability. Applications include air filter housings, fan blades, and fittings with high loads... |