Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 5.40 MPa | 783 psi | ASTM D412 |
Polymax® Maxelast® P2775 TPE, PP Overmold or Standalone use Characteristics: Soft, flexible feelExcellent grip characteristicsGood weatherabilityGood compression setEasy processability and colorabilityAvailable FDA and medical gradesAvailable translucent gra.. |
|||
Tensile Strength, Yield | 5.40 MPa | 783 psi | 50% Elongation; ASTM D412 |
Covestro Texin® 5590 Thermoplastic Polyurethane, Polyether-based, Medical
(discontinued **) This grade is in chemical compliance with 21 CFR 177.1680 (Polyurethane Resins) and 177.2600 (Rubber articles intended for repeated use) subject to the limitations of this regulation and any other r.. |
|||
Tensile Strength, Yield | 5.40 MPa @Strain 100 % |
783 psi @Strain 100 % |
ASTM D638 |
Toyobo A2080A Thermoplastic Polyurethane Elastomer, Injection Grade Polycaprolactone type, featuring a good balance of mechanical strength and chemical resistance. Various grades of Toyobo polyurethane TPEs are used in auto parts, hoses, tubes, sporting goods, shoe.. |
|||
Tensile Strength, Yield | 5.40 MPa @Strain 100 % |
783 psi @Strain 100 % |
ASTM D638 |
Toyobo A3080A Thermoplastic Polyurethane Elastomer, Injection Grade Polyether type, featuring excellent resistance to hot water and fungus. Various grades of Toyobo polyurethane TPEs are used in auto parts, hoses, tubes, sporting goods, shoe soles, etc.Information .. |
|||
Tensile Strength, Yield | 5.40 MPa | 783 psi | 50 microns film; ASTM D882 |
Arkema Group Orevac® 9318 Film EVA-MAH Terpolymer EVA Terpolymers based Main Applications: Extrusion coating Thermo-adhesive filmsInformation provided by Arkema Group |
|||
Tensile Strength, Yield | 5.40 MPa @Strain 100 % |
783 psi @Strain 100 % |
ASTM D638 |
Toyobo E2080A Thermoplastic Polyurethane Elastomer, Extrusion Grade Polycaprolactone type, featuring a good balance of mechanical strength and chemical resistance. Various grades of Toyobo polyurethane TPEs are used in auto parts, hoses, tubes, sporting goods, shoe.. |
|||
Tensile Strength, Yield | 5.40 MPa | 783 psi | AVG Stress at Elongation M50; ASTM D412 Method A |
Seals Eastern 7168 Nitrile Rubber Nitrile for oil & gas serviceInformation provided by Seals Eastern, Inc. |
|||
Tensile Strength, Yield | 5.40 MPa | 783 psi | M100 |
3M Dyneon™ Fluorel™ FLS-2650 Fluoroelastomer VF2 + HFP + TFE Terpolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 70.3%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, 1.8% Luperco™ 101XL Peroxide, and 2.5 % Triallyl .. |