Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | >= 450 MPa | >= 65300 psi | |
MetalTek ESCOLOY 45D® Cast UNS J93345 Duplex Stainless Steel Excellent seawater corrosion resistance combined with nearly twice the strength of common stainless steels. Produced under license of ESCO Corp.Applications: Offshore piping systems, couplings. Cent.. |
|||
Tensile Strength, Yield | >= 450 MPa | >= 65300 psi | |
MetalTek MTEK 410 Cast UNS J91150 Martensitic Stainless Steel Information provided by MetalTek |
|||
Tensile Strength, Yield | >= 450 MPa | >= 65300 psi | |
MetalTek MTEK SD100 Cast UNS J93380 Duplex Stainless Steel Information provided by MetalTek |
|||
Tensile Strength, Yield | 450 MPa @Strain 0.200 % |
65300 psi @Strain 0.200 % |
|
Haynes 230® alloy, 20% cold reduction, 1121°C anneal for 5 minutes Excellent high-temperature strength, outstanding resistance to oxidizing environments up to 1149°C, premier resistance to nitriding environments, and excellent long-term thermal stability. Applic.. |
|||
Tensile Strength, Yield | 450 - 620 MPa | 65300 - 89900 psi | |
Materion Brush 1915™ Heat Treated Temper Wire, 0.375" - 0.500" Information supplied by Brush Wellman Engineered Materials.Treatment required for max strength: 3.5 hrs @ 370°CBrush 1915™ is Brush Wellman's new heat-treatable leaded copper alloy. Enginee.. |
|||
Tensile Strength, Yield | >= 450 MPa | >= 65300 psi | |
MetalTek FERRALIUM® 225 UNS J32550 Duplex Stainless Steel Excellent seawater corrosion resistance combined with nearly twice the strength of common stainless steels. Produced under license of Meighs Ltd.Applications: Offshore piping systems, couplings. Cen.. |
|||
Tensile Strength, Yield | 450 MPa @Strain 0.200 % |
65300 psi @Strain 0.200 % |
|
Haynes 242® alloy, cold reduced sheet, annealed Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |
|||
Tensile Strength, Yield | 450 MPa @Strain 0.200 %, Temperature 760 °C |
65300 psi @Strain 0.200 %, Temperature 1400 °F |
|
Haynes 242® alloy, cold rolled sheet, annealed and aged Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |
|||
Tensile Strength, Yield | 450 MPa @Strain 0.200 %, Temperature 650 °C |
65300 psi @Strain 0.200 %, Temperature 1200 °F |
Precipitation Hardened prior to test |
Special Metals NIMONIC® Alloy 263 A precipitation-hardenable nickel-chromium-cobalt alloy with an addition of molybdenum for solid-solution strengthening. It has high strength and corrosion resistance along with good formability an.. |
|||
Tensile Strength, Yield | 450 MPa @Strain 0.200 % |
65300 psi @Strain 0.200 % |
Precipitation Hardened. Value at room temperature |
Special Metals NIMONIC® Alloy PE16 A precipitation-hardenable nickel-iron-chromium alloy with an addition of molybdenum for solid-solution strengthening. It has good strength and oxidation resistance at temperatures to about 1380°.. |
|||
Tensile Strength, Yield | >= 450 MPa | >= 65300 psi | After bake hardening |
SSAB Tunnplat Docol® 600DL High-strength Steel High-strength SteelComments: Docol DP - Cold Rolled Steel - Extra high-strength steel (EHS). Property values are for cold-rolled steel; thicknesses 0.5 - 1.6 mm. Iron content is approximate - exact.. |
|||
Tensile Strength, Yield | >= 450 MPa @Strain 0.200 % |
>= 65300 psi @Strain 0.200 % |
|
Schmolz + Bickenbach UGICHROM 4462 Duplex Chrome Plated Bar Description: Ugichrom combines the high efficiency of micro-fissuring chromium plating with the technology of Ugitech’s most advanced gradesAdvantages: Zero defects guarantee; Low friction coef.. |
|||
Tensile Strength, Yield | 450 MPa @Strain 0.200 % |
65300 psi @Strain 0.200 % |
Typical |
TIMET CP Titanium (ASTM Grade 3) Commercially Pure Titanium. Industry Specifications: USA Aerospace: AMS 4900. Germany Aerospace: 3.7055. France: T-50. UK Aerospace Specification DTD 5023, 5273.Features: The mechanical properti.. |
|||
Tensile Strength, Yield | >= 450 MPa @Strain 0.200 % |
>= 65300 psi @Strain 0.200 % |
|
CLAL-MSX NICLAL 1800 H12 1/2 Hard Copper Alloy, Free Cutting Nickel-Silver Main Characteristics: Good corrosion resistanceHigh mechanical propertiesTypical Applications:Parts subject to high stressHigh quality fastenersInformation provided by CLAL-MSX |
|||
Tensile Strength, Yield | >= 450 MPa @Strain 0.200 % |
>= 65300 psi @Strain 0.200 % |
|
CLAL-MSX NICLAL 3444 H14 4/4 Hard Copper Alloy, diameter < 8 Copper Alloy, Free Cutting Bronze Main Characteristics: Excellent machineabilityHigh mechanical propertiesSelf lubricating alloyTypical Applications:Parts for connectorsFriction partsBearings-Pinions-Lock pinsInformation provided b.. |
|||
Tensile Strength, Yield | 450 - 550 MPa @Strain 0.200 % |
65300 - 79800 psi @Strain 0.200 % |
|
CLAL-MSX SICLANIC S® TF Quenched Copper Alloy, precipitation treated SICLANIC S® is particularly recommended for the production of conductive contact blades. SICLANIC S® offers :electrical conductivity greatly superior to that of bronzes, brasses and nickel silver.. |
|||
Tensile Strength, Yield | >= 450 MPa @Strain 0.200 % |
>= 65300 psi @Strain 0.200 % |
|
CLAL-MSX ARCAP Anticorrosion AP4 H12 1/2 hard, Rolled Copper Alloy Description: The AP4 grade is less easy to turn than the other grades of ARCAP. It can however be machined without more difficulty than the nickel chromium molybdenum steels.High Corrosion Resistanc.. |
|||
Tensile Strength, Yield | 450 MPa @Strain 0.200 % |
65300 psi @Strain 0.200 % |
|
ATI Allegheny Ludlum Grade 3 Titanium (UNS R50550) Uses: CPI equipment, industrial components, heat exchangers.Mechanical property data below is typical of annealed samples at room temperature.Information provided by Allegheny Ludlum. |
|||
Tensile Strength, Yield | >= 450 MPa | >= 65300 psi | |
ArcelorMittal Dual Phase 780 Very high strength steel, Hot Rolled Steel Description: Dual Phase steels offer an outstanding combination of strength and drawability as a result of their microstructure, in which a hard martensitic or bainitic phase is dispersed in a soft .. |
|||
Tensile Strength, Yield | 450 - 530 MPa | 65300 - 76900 psi | |
ArcelorMittal FB 560 Hot rolled ferrite-bainite steel Available in the following: Extragal® (HDT560F+Z)Description: This range of hot-rolled high strength steels has been developed to meet weight reduction requirements. It comprises four strength leve.. |
|||
Tensile Strength, Yield | 450 MPa | 65300 psi | |
Resistalloy International Resistalloy 3718 Nickel Chromium Electrical Resistance Alloy Used mainly for electrical elements in both industrial and domestic applications. Industrial applications vary from small laboratory kilns to heavy-duty heat-treatment furnaces under all types of at.. |
|||
Tensile Strength, Yield | 450 MPa | 65300 psi | |
Resistalloy International Resistalloy 6015 Nickel Chromium Electrical Resistance Alloy Used mainly for electrical elements in both industrial and domestic applications. Industrial applications vary from small laboratory kilns to heavy-duty heat-treatment furnaces under all types of at.. |
|||
Tensile Strength, Yield | 450 MPa @Strain 0.200 %, Temperature 705 °C |
65300 psi @Strain 0.200 %, Temperature 1300 °F |
|
Haynes 242® alloy, hot rolled plate, annealed and aged Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good thermal.. |
|||
Tensile Strength, Yield | 450 MPa | 65300 psi | |
Resistalloy International Resistalloy 8020 Nickel Chromium Electrical Resistance Alloy Used mainly for electrical elements in both industrial and domestic applications. Industrial applications vary from small laboratory kilns to heavy-duty heat-treatment furnaces under all types of at.. |
|||
Tensile Strength, Yield | 450 MPa @Strain 0.200 % |
65300 psi @Strain 0.200 % |
|
ATI Allegheny Ludlum Grade 12 Titanium (UNS R53400) Uses: heat exchangers, industrial components, tubing, CPI equipment.Mechanical property data below is typical of annealed samples at room temperature.Information provided by Allegheny Ludlum. |
|||
Tensile Strength, Yield | >= 450 MPa | >= 65300 psi | Minimum Guaranteed |
Industeel SOLEIL A2 13% Cr High Strength Martensitic Stainless Steel (QT650 Heat Treatment) Description: Soleil A2 has combined Chromium (~13%) and Carbon ~0.10%) additions to provide an excellent combination of high mechanical properties and improved corrosion resistance properties. The g.. |