Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 2.76 MPa | 400 psi | at 200%, as molded |
Multibase SILASTIC® C7-4565 CADOX TS-50S Dow-Corning Biomedical Grade ETR Elastomer Information provided by Multibase |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | TM R050-36 |
Resinlab® EP1225 Black Unfilled Epoxy Adhesive Resinlab™ EP1225 Black is a two part unfilled epoxy adhesive designed for bonding of metals, ceramics and most plastics. It has slightly thixotropic viscosity to give gap filling ability bust stil.. |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | @50% Elongation; ASTM D1414 |
Greene Tweed CHEMRAZ® 615 Perfluoroelastomer Greene Tweed’s Chemraz® 615 exhibits outstanding high temperature properties, with a temperature range from 0°F to 615°F (-18°C to 324°C). Chemraz 615’s chemical resistance.. |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | @50% Elongation; ASTM D1414 |
Greene Tweed CHEMRAZ® 661 Perfluoroelastomer Chemraz® 661 perfluoroelastomer is specifically developed by Greene Tweed to meet the unique demands of aggressive plasma systems. This product’s unique formulation provides enhanced plasma.. |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | Elastic; ASTM D412 |
Multibase Multi-Flex® A 1540 Natural TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Colorability, GoodElasticity, HighElectrically InsulatingFlame RetardantFlexibility, GoodHeat StabilizedOzone ResistantProcessability, GoodSoftUV Resistance, Go.. |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | Elastic; ASTM D412 |
Multibase Multi-Flex® D 2010 TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Colorability, GoodElasticity, HighElectrically InsulatingFlame RetardantFlexibility, GoodHeat StabilizedOzone ResistantProcessability, GoodUV Resistance, Good F.. |
|||
Tensile Strength, Yield | >= 2.76 MPa | >= 400 psi | Stress at Elongation M50; ASTM D412 Method A |
Seals Eastern 7145 Fluorocarbon-Elastomer FKM specially for oil & gas service.Information provided by Seals Eastern, Inc. |
|||
Tensile Strength, Yield | 2.76 MPa @Strain 100 % |
400 psi @Strain 100 % |
ASTM D412-92 |
Saint-Gobain Pharmed® Biocompatible Tubing for Peristaltic Pumps and Cell Culture Features/Benefits:Outlasts silicone tubing in peristaltic pumps by up to 30 timesLow particulate spallationCan be autoclaved repeatedlyTemperature resistant from -60°F to 275°FWithstands repea.. |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | 100%; ASTM D412 |
Teknor Apex APEX® 3301-50 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Uses-Automotive Applications, Food Service Applications, General Purpose, Medical Applications, Profiles, To.. |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | 100%; ASTM D412 |
Teknor Apex APEX® 3310-55 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Sterilizable, RadiationUses-Automotive Applications, Food Service Applications, General Purpose, Med.. |
|||
Tensile Strength, Yield | 2.76 MPa @Strain 300 % |
400 psi @Strain 300 % |
ASTM D412 |
Teknor Apex Monprene® MP 1037FL Thermoplastic Elastomer Notes: Transparent Features: High FlowInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 2.76 MPa @Strain 300 % |
400 psi @Strain 300 % |
ASTM D412 |
Teknor Apex Monprene® MP 1643L1 Thermoplastic Elastomer Notes: Translucent Features: Tough; Good Melt StrengthInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 2.76 MPa @Strain 300 % |
400 psi @Strain 300 % |
ASTM D412 |
Teknor Apex Monprene® MP 1851 Thermoplastic Elastomer Notes: Translucent Features: High FlowInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 2.76 MPa @Strain 300 % |
400 psi @Strain 300 % |
ASTM D412 |
Teknor Apex Monprene® MP 1881 Thermoplastic Elastomer Uses: Grips Features: Excellent Resistance to Skin OilsInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | ASTM D412 |
Teknor Apex MONPRENE® MP 2730 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
Tensile Strength, Yield | 2.76 MPa @Strain 300 % |
400 psi @Strain 300 % |
ASTM D412 |
Teknor Apex Monprene® MP 2770UV Thermoplastic Elastomer Notes: General Purpose; OpaqueInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 2.76 MPa @Strain 300 % |
400 psi @Strain 300 % |
ASTM D412 |
Teknor Apex Monprene® MP 1504 Thermoplastic Elastomer Notes: Translucent Features: Tough; Good Melt Strength Uses: Safety ProductsInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 2.76 MPa @Strain 300 % |
400 psi @Strain 300 % |
ASTM D412 |
Teknor Apex Monprene® MP 1564 Thermoplastic Elastomer Notes: Translucent Features: High FlowInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 2.76 MPa @Strain 300 % |
400 psi @Strain 300 % |
ASTM D412 |
Teknor Apex Monprene® MP 1595 Thermoplastic Elastomer Features: Nice Silken Feel Uses: Leisure ProductsInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 2.76 MPa @Strain 300 % |
400 psi @Strain 300 % |
ASTM D412 |
Teknor Apex Monprene® MP 1755L3 Thermoplastic Elastomer Notes: USP Class VI; ISO 10993 Features: Silken Feel; Tough; Good Melt Strength Uses: Medical BulbsInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | Adhesion to EPDM, 0.125" Micro Die, 8"/min; ASTM D412 |
Teknor Apex UNIPRENE® 7400-64 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | |
Master Bond Mastersil 410 One Component Room Temperature Curing Silicon Master Bond MasterSil 410 is a ready-to-use, one component high performance silicone elastomer compound for bonding, sealing, protective coatings and formed-in-place gaskets. This compound has a pas.. |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | cured 72 hrs @ RT |
ACC QM 122 QSI Quantum Silicones 22 Durometer Condensation Cured Moldmaking Material QM 122 is a two-component, room temperature condensation cure silicone material. The cured rubber is flexible with excellent mechanical and physical properties in addition to good shelf-life stabili.. |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | Method A (Dumbbell & Section), 20 in/min, Break; ASTM D412 |
PolyOne Synprene® IT 086LFR Thermoplastic Elastomer - SBC
(discontinued **) Description/Features:Flame RetardantMulti-Purpose Thermoplastic ElastomerApplications:General PurposeInteriorProcessing Method:Injection MoldingPolyOne First ChoiceInformation provided by PolyOne Co.. |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | at 100%; ASTM D412 |
D-2103 Styrene-based Biomedical Elastomer |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | at 100%; ASTM D412 |
G-2705 Styrene-based Biomedical Elastomer |
|||
Tensile Strength, Yield | 2.76 MPa | 400 psi | at 100%; ASTM D412 |
EG80A Polyurethane-based Biomedical Elastomer |