Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 2.41 MPa | 350 psi | Mean Value, Flatwise, Core Failure, 39-42% RC; ASTM C297 |
Park Electrochemical Nelcote® E-752 Epoxy Prepreg, 3K PW G30-500 Reinforced Nelcote® E-752 is a toughened, 185°C cure epoxy system designed for demanding structural applications up to 130°C. E-752 offers a good balance of toughness, high service temperature and good mois.. |
|||
Tensile Strength, Yield | 2.41 MPa | 350 psi | @50% Elongation; ASTM D1414 |
Greene Tweed CHEMRAZ® 584 Perfluoroelastomer Greene Tweed’s Chemraz® 584, a cream-colored perfluoroelastomer, is a specialty compound formulated to outlast the most demanding chemical process applications. Because of its outstanding o.. |
|||
Tensile Strength, Yield | 2.41 MPa | 350 psi | @100% Elongation; ASTM D1414 |
Greene Tweed Xyfluor® 860 Fluorinated Elastomer Compound Xyfluor® 860, a highly fluorinated elastomer compound, offers excellent chemical compatibility over a wide range of temperatures from -76°F to 450°F (-60°C to 232°C). Recommended for.. |
|||
Tensile Strength, Yield | 2.41 MPa | 350 psi | @50% Elongation; ASTM D1414 |
Greene Tweed CHEMRAZ® 570 Perfluoroelastomer Chemraz® 570, recommended for a wide variety of semiconductor equipment wet processing applications where stringent seal reliability and contamination control is required, offers excellent perfor.. |
|||
Tensile Strength, Yield | 2.41 MPa | 350 psi | @50% Elongation; ASTM D1414 |
Greene Tweed CHEMRAZ® 640 Perfluoroelastomer Chemraz® 640 perfluoroelastomer is specifically developed by Greene Tweed to meet the rigorous demands of aggressive plasma systems. This product’s unique formulation provides enhanced plas.. |
|||
Tensile Strength, Yield | >= 2.41 MPa | >= 350 psi | Stress at Elongation M50; ASTM D412 Method A |
Seals Eastern 7182D Fluorocarbon-Elastomer Formulated AFLAS® high-temperature "sour" oil & gas service. Excellent acid and base resistance.Information provided by Seals Eastern, Inc. |
|||
Tensile Strength, Yield | 2.41 MPa @Strain 300 % |
350 psi @Strain 300 % |
ASTM D412 |
Teknor Apex Monprene® MP 1843L1 Thermoplastic Elastomer Notes: Translucent Features: High FlowInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 2.41 MPa | 350 psi | Transverse/Width |
Saint-Gobain Norton® Fluorglas® Chemfilm® R128/R129 Premium Grade Extruded Full Density PTFE Film (0.004" thick) Description: Full Density Unsintered Tape is used as primary insulation for high-temperature wires, jackets and cables and wall for convoluted hose. It meets the requirements of component insulation.. |
|||
Tensile Strength, Yield | 2.41 MPa | 350 psi | Transverse/Width |
Saint-Gobain Norton® Fluorglas® Chemfilm® R128/R129 Premium Grade Extruded Full Density PTFE Film (0.005" thick) Description: Full Density Unsintered Tape is used as primary insulation for high-temperature wires, jackets and cables and wall for convoluted hose. It meets the requirements of component insulation.. |
|||
Tensile Strength, Yield | 2.41 MPa | 350 psi | Method A (Dumbbell & Section), 20 in/min, Break; ASTM D412 |
PolyOne Synprene® RT-3720 Thermoplastic Elastomer - SBC, Mineral Filled
(discontinued **) Description/Features:Multi-Purpose Thermoplastic ElastomerMineral FilledNaturalApplications:General PurposeMarket:Consumer GoodsIndustrialBuilding and ConstructionProcessing Method:Injection Molding.. |