Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 23.4 MPa | 3390 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable W3204 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | Type I, 51 mm/min; ASTM D638 |
PolyOne Maxxam™ PPC-40T Nat Polypropylene Copolymer (PP Copolymer) PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Maxxam™ SY 89-21-1 Polypropylene, Unspecified (PP, Unspecified) Maxxam ™ SY 89-21-1 is a polypropylene copolymer compound with a pre-dispersed blowing agent for up to 50% expansion. The compound offers consistent cell structure, dielectric properties, and stren.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Maxxam™ SY 89-22-7 Polypropylene, Unspecified (PP, Unspecified) Maxxam ™ SY 89-22-7 is a polypropylene copolymer compound with a pre-dispersed blowing agent for up to 60% expansion. The compound offers consistent cell structure, dielectric properties, and stren.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Maxxam™ SY 89-23-7 Polypropylene, Unspecified (PP, Unspecified) Maxxam ™ SY 89-23-7 is a polypropylene copolymer compound with a pre-dispersed blowing agent for up to 60% expansion. The compound offers consistent cell structure, dielectric properties, and stren.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | Compression Molded; ASTM D638 |
NOVA Chemicals Surpass® RMs244-UG Octene sHDPE Rotational Molding Film Features: Octene copolymerExceptional low temperature propertiesOutstanding stiffnessBroad processing windowSuperior whiteness for improved part appearanceEasy mold releaseNSF listed for Standards 1.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | 500 mm/min; ASTM D638 |
Eastman E6837-539A Polyethylene
(discontinued **) PolyethyleneE6837-539A is used in various injection molding applications including closures for containers or extrusion coating for high stiffness. It has good processability. This product may be us.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | press cure 11 min./160ºC |
TSE Industries Millathane® 26 Millable Polyether Urethane for Food Contact Applications Millathane 26 is a polyether polyurethane rubber compliant with the United States Code of Federal Regulations*, Title 21 parts 177.1680 and 177.2600. This polyurethane rubber is designed for food co.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | ASTM D638 |
Chevron Phillips HiD® 9035 HDPE Injection Molding Resin
(discontinued **) Resin Type: Linear Copolymer, ASTM D 4976 Classification: PE 231, A 52600Characteristics: Excellent Flow, Moderate Impact Strength, Good Stiffness, Moderate ESCR, Excellent Shrinkage ResistanceAppli.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | ASTM D638 |
Chevron Phillips LX8119 HDPE Injection Molding Resin
(discontinued **) Resin Type: linear copolymer; ASTM D4976 Classification: PE 233, A 56700Characteristics: warp resistant, excellent impact strength, excellent ESCR, moderate shrinkage resistanceApplications: seats, .. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | Compression Molded; ASTM D638 |
NOVA Chemicals Surpass® RMs244-U Octene sHDPE Rotational Molding Film Features: Octene copolymerExceptional low temperature propertiesOutstanding stiffnessBroad processing windowSuperior whiteness for improved part appearanceEasy mold releaseNSF listed for Standards 1.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | ASTM D638 |
Albis Plastics Cellulose Acetate Propionate CP800 (Base Grade), 17% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Propionate (CAP)Characteristics: Strength, Hardness, Stiffness, Weatherability and Dimensional StabilityApplications: Brush Handles, Safety Glasses, Optical Products and .. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | ASTM D638 |
Albis Plastics Cellulose Acetate Propionate CP801 (UV Inhibitor Added), 17% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Propionate (CAP)Characteristics: Strength, Hardness, Stiffness, Weatherability and Dimensional StabilityApplications: Brush Handles, Safety Glasses, Optical Products and .. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | ASTM D638 |
Albis Plastics Cellulose Acetate Propionate CP808 (FDA), 17% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Propionate (CAP)Characteristics: Strength, Hardness, Stiffness, Weatherability and Dimensional StabilityApplications: Brush Handles, Safety Glasses, Optical Products and .. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | 2 in/min (50 mm/min); ASTM D-638 |
Ineos TC46-25 HDPE TC46-25 is a natural high density polyethylene copolymer designed specifically for telecommunications ducting to meet or exceed the material requirements in ASTM F2160, UL 651B and MEMA TC-7. TC46-.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | |
Kraton® G1657 + PP blend + Talc (12/21/67) Unmodified polypropylene has high rigidity and good heat resistance, but poor impact resistance, especially at low temperatures. Blending KRATON D and G polymers with PP significantly improves the .. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | 2 in/min.; ASTM D638 |
Ineos K46-06-185 HDPE K46-06-185 is a natural high molecular weight, high-density copolymer polyethylene developed for automotive fuel tanks. It combines excellent processability and outstanding physical performance, par.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | |
Spartech E65490 General Purpose PVC First choice for compounds meeting the stringent requirements of Spiral Hose, Automotive, Housewares, Farm Equipment, Coated Fencing and numerous other applications including Lawn & Garden Wheels. B.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | ASTM D638 |
Total PPR 7238 Polypropylene, Random Copolymer - Blow Molding Impact Strength. TOTAL Polypropylene 7238 offers excellent impact strength, clarity and gloss.Lubricated 7238 offers superior core rod release for ease in processing.High Purity. 7238 features min.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | press cure 11 min./160ºC |
TSE Industries Millathane® 26 Millable Polyether Urethane for Food Contact Applications Millathane 26 is a polyether polyurethane rubber compliant with the United States Code of Federal Regulations*, Title 21 parts 177.1680 and 177.2600. This polyurethane rubber is designed for food co.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | |
Dow HDPE 10462N High Density Polyethylene DOW HDPE 10462N resin is a narrow molecular weight distribution polymer designed to offer good stress crack resistance and impact strength with excellent rigidity. This resin has good processability.. |
|||
Tensile Strength, Yield | 23.4 MPa | 3390 psi | ASTM D638 |
Chevron Phillips LX8124 HDPE Injection Molding Resin
(discontinued **) Resin Type: linear copolymer; ASTM D4976 Classification: PE 231, A 52600Characteristics: excellent flow, moderate impact strength, good stiffness, moderate ESCR, excellent shrinkage resistanceApplic.. |