Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ASTM D638 |
SABIC PP 49MK40 Polypropylene Impact Copolymer for Injection Molding Product Description: PP 49MK40 is a high crystalline impact copolymer with high stiffness. This grade is especially developed for producing injection molded articles. The grade contains an antist.. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ASTM D638 |
SABIC PP 502P Polypropylene Homopolymer for Raffia Applications Product Description: PP 502P is intended for producing low denier stretched tapes with the following features:Consistent processabilityGood processability at high line speedsLow water carry overGoo.. |
|||
Tensile Strength, Yield | >= 33.0 MPa | >= 4790 psi | ASTM D638 |
NIZHNEKAMSKNEFTEKHIM PP 1532B (YD50G) Propylene Homopolymer Product obtained by polymerization of propylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation resistance when P.. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ISO 527-2 |
Polyplastic Armlen® PP MF 25-3-901 Polypropylene, 20% Mineral Filled Heat stabilized, black colorInformation provided by PolyPlastic Group. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | 50 mm/min |
Eastman Tenite 131E-28 Cellulose Acetate
(discontinued **) 28% plasticized and contains 50% fiber grade ester.ISO data as provided by the manufacturer, Eastman Chemical. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ASTM D638-02 |
Ipiranga Petrochem PRA 0852 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr.. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ISO 527-1, -2 |
LyondellBasell Hostacomâ„¢ BC142/1AC Polypropylene Copolymer Description: Hostacomâ„¢ BC142/1AC conventional melt flow, 3,600 MPa flexural modulus, precolored, mineral-filled polypropylene copolymer has a good balance of stiffness and impact resistance. It.. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ISO 527-1, -2 |
LyondellBasell Hostacomâ„¢ CB267 Thermoplastic Polyolefin Elastomer Description: Hostacomâ„¢ CB267 medium melt flow, 1,600 MPa flexural modulus thermoplastic elastomeric olefin (TEO) resin has an excellent balance of scratch and mar resistance, rigidity and impac.. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics LNP Lubricomp ML003 PP (Europe-Africa-Middle East) LNP* Lubricomp* ML003 is a compound based on Polypropylene resin containing PTFE.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP ML004S PP LNP* LUBRICOMP* ML004S is a compound based on Polypropylene resin containing 20% PTFE. Added features of this material include: Wear Resistant, Heat Stabilized. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | 50mm/min; ISO 527-2 |
Borealis HK030U Polypropylene Compound HK030U is a special low viscosity polypropylene compound developed to fit the production of PP-GF composites in the direct LFT compression and injection molding process as well as in combination wit.. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ISO 527-2 |
Total PPH 3051 Polypropylene, Homopolymer ATOFINA Polypropylene PPH 3051 is homopolymer.ApplicationATOFINA Polypropylene PPH 3051 is intended for the extrusion of flat bioriented films for food packaging or high strength adhesive tapes. Inf.. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | GB/1040 |
Zhejiang Juner JEPP263 Weatherability PP Series Applications: Air Conditioning SystemInformation provided by Zhejiang Juner New Materials Co, Ltd. |
|||
Tensile Strength, Yield | 33.0 MPa @Strain 300 % |
4790 psi @Strain 300 % |
ISO 527-1/-2 |
Covestro Desmopan® DP 9095AU Polyurethane injection molding gradewith special UV stabilizersvery good hydrolysis and microbial resistancegood wear resistancelow warpargeshort cycle timesApplicationEar-tagsPreprocessingMax. Water content |
|||
Tensile Strength, Yield | 33.0 MPa @Strain 50.0 % |
4790 psi @Strain 50.0 % |
|
Covestro Texin® 945U Urethane Thermoplastic Elastomer Key Features:UnfilledU.V. stabilized or stable to weatherSuitable processing methods:Injection moldingProfile extrusionSheet extrusionInformation provided by Bayer Polymers.As of 1 September 2015, B.. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ISO 527-2/50 |
ExxonMobil PP1013H1 Polypropylene Homopolymer Product Description: A homopolymer resin that meets certified requirements for use in Medical and Pharmaceutical applications.Availability: Europe and North America Features:Autoclave SterilizableE.. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0334C10L Calcium Reinforced |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0334M30L Mica Reinforced |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0336M20L Mica Reinforced |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0339W20L Wollastonite Reinforced |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ASTM-D638 |
Braskem PRA 0852 RACO Random Polypropylene Copolymer PRA 0852 is a medium melt flow rate random copolymer with slip and antiblocking agents. It is suitable for blown and cast film extrusion. PRA 0852 has excellent optical properties and good processab.. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0339M40CL Mica Reinforced Coupled |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ASTM D638 |
Braskem H 306 Injection Molding Polypropylene Description: H 306 is a medium melt flow rate additivated homopolymer used for general purposes. It suitable for injection moulding and fiber extrusion. This product exhibits excellent processabilit.. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ISO 527-2 |
Polyplastic Armlen® PP MF 20-3-901 Polypropylene, 20% Mineral Filled Heat stabilized, low emission, black colorInformation provided by PolyPlastic Group. |
|||
Tensile Strength, Yield | 33.0 MPa | 4790 psi | ASTM D638 |
Braskem BU004 Blow Molding High Density Polyethylene Containers for lubricating oils, alcohol, cosmetics and yots; Toys.Information provided by Braskem. |