Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 1.38 MPa | 200 psi | 200%, post cured- 4 hours at 204°C |
Multibase SILASTIC® C7-4535 DICUP R Dow-Corning Biomedical Grade ETR Elastomer Information provided by Multibase |
|||
Tensile Strength, Yield | 1.38 MPa | 200 psi | TM R050-36 |
Resinlab® EP1290 Clear Mineral Filled Epoxy Adhesive Resinlab™ EP1290 Clear is a two part mineral filled epoxy adhesive designed for bonding metals and plastics. It cures at room temperature to a tough, semi-flexible material. It has good wetting to .. |
|||
Tensile Strength, Yield | 1.38 - 40.0 MPa | 200 - 5800 psi | Average value: 14.8 MPa Grade Count:50 |
Overview of materials for Epoxy Adhesive This property data is a summary of similar materials in the MatWeb database for the category "Epoxy Adhesive". Each property range of values reported is minimum and maximum values of appropriate Mat.. |
|||
Tensile Strength, Yield | 1.38 - 62.1 MPa | 200 - 9000 psi | Average value: 23.2 MPa Grade Count:13 |
Overview of materials for Silicone, Molded, Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Silicone, Molded, Glass Fiber Filled". Each property range of values reported is minimum and maximum val.. |
|||
Tensile Strength, Yield | 1.38 MPa @Strain 100 % |
200 psi @Strain 100 % |
Compound Property; Arlon SQA-TMS-008 |
Arlon R36772R008 0.008" (0.203 mm) Fully Cured, Unsupported, Silicone Rubber with Fiberglass Substrate
( Design/Construction:Side 1: Fully Cured, Unsupported, Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, material .. |
|||
Tensile Strength, Yield | 1.38 MPa | 200 psi | No units listed, assumed to be psi. |
Cos46 Cork/Synthetic Rubber Sheet Description: Harvested every 9-12 years from the cork oak tree, cork is able to rebound from compression with extrusion. Applications include: stoppers, soundproofing, flooring, gaskets, and many ot.. |
|||
Tensile Strength, Yield | >= 1.38 MPa | >= 200 psi | No units listed, assumed to be psi. |
Cos70 Cork/Synthetic Rubber Sheet Description: Harvested every 9-12 years from the cork oak tree, cork is able to rebound from compression with extrusion. Applications include: stoppers, soundproofing, flooring, gaskets, and many ot.. |
|||
Tensile Strength, Yield | 1.38 MPa @Strain 300 % |
200 psi @Strain 300 % |
ASTM D412 |
Multibase Multi-Flex® RP 6568 TPE Styrene Ethylene Butylene Styrene Block Copolymer Features: Chemical Resistance, Good General PurposeOzone Resistant Thermal Stability, Good Forms:PelletsProcessing Method:Injection MoldingBlow MoldingExtrusion Uses: Automotive ApplicationsInfor.. |
|||
Tensile Strength, Yield | >= 1.38 MPa | >= 200 psi | Stress at Elongation M50; ASTM D412 Method A |
Seals Eastern 5862 Fluoro-silicone Fluoro-siliconeInformation provided by Seals Eastern, Inc. |
|||
Tensile Strength, Yield | 1.38 MPa @Strain 300 % |
200 psi @Strain 300 % |
ASTM D412 |
Teknor Apex Monprene® MP 2104 Thermoplastic Elastomer Features: Nice Silken Feel Uses: Safety ProductsInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 1.38 MPa | 200 psi | at 150% elongation, maximum |
Dow Corning SILASTIC® 94-599-HC SILICONE RUBBER PART A&B 47 Durometer, 2-part, 1 to 1 mix, translucent, molding grade, Liquid Silicone Rubber.Information provided by Dow Corning |
|||
Tensile Strength, Yield | 1.38 MPa | 200 psi | |
ACC QSil 40 QSI Quantum Silicones 40 Durometer Condensation Cure for Potting QSil 40 is a general purpose two-part, room temperature, condensation cure siloxane elastomer. The two applicable catalysts are 0.5% DBT by weight and 10% Deep Section Catalyst by weight. Cure speed.. |
|||
Tensile Strength, Yield | 1.38 MPa | 200 psi | TM R050-36 |
Resinlab® EP1290 Gray Mineral Filled Epoxy Adhesive Resinlab™ EP1290 Gray is a two part mineral filled epoxy adhesive designed for bonding metals and plastics. It cures at room temperature to a tough, semi-flexible material. It has good wetting to m.. |
|||
Tensile Strength, Yield | 1.38 MPa | 200 psi | Type I, 5.1 mm/min; ASTM D638 |
PolyOne Gravi-Tech™ GRV-TP-050-CU-NAT Styrene Butadiene Block Copolymer (SBC) Information provided by PolyOne |