Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 12.8 MPa | 1850 psi | ASTM D412 |
Polymax® Maxelast® C4995 TPE, Transparent Polymax's TPE material complies with UL, VDE, FDA, RoHS and PAH's standards.Uses:Consumer ProductsToys & NoveltiesAuto PartsSporting GoodsWire & Cable ElectronicsMedical DevicesPlastic TougheningInf.. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | ASTM D638 |
Entec Hypel® PELLD60/.925 LLDPE
(discontinued **) Entec's proprietary products include a full range of compounds in the Nylon 6/6, Nylon 6, ABS, PBT, Polycarbonate, PC/ABS, PC/ASA, PC/PBT, and PPO/PPE resin families.Information provided by Ente.. |
|||
Tensile Strength, Yield | 12.7 MPa @Thickness 3.20 mm |
1850 psi @Thickness 0.126 in |
50mm/min; ASTM D638 |
LG Chemical LUPOL ED1045D TPO, Thermoplastic Elastomer Description: Injection Molding, TPO, Thermoplastic Elastomer, Soft TouchApplication: Electrical & Electronic, Automotive PartsCAS: 9003-07-0, 1333-86-4, 25087-34-7 and 14807-96-6Information provided.. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | Elastic; ASTM D412 |
Multibase Multi-Flex® D 4502 TPO Thermoplastic Polyolefin Elastomer Features: Chemical Resistance, Good PaintableOzone Resistant Thermal Stability, GoodDensity, LowTear Strength, GoodScratch Resistant Forms:PelletsProcessing Method:Injection Molding Uses: Automot.. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | Elastic; ASTM D412 |
Multibase Multi-Flex® G 7430 TPE Styrene Ethylene Butylene Styrene Block Copolymer Forms: PelletsProcessing Methods:Injection Molding Information provided by Multibase |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | Crosshead Speed - 20 in/min; ASTM D638 |
LyondellBasell Petrothene® NA870252 Low Density Polyethylene ApplicationsPETROTHENE NA 870-252 exhibits an excellent balance of toughness and softness, with excellent dimensional stability. Typical applications include caps and closures, housewares, toys, co.. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | Elastic; ASTM D412 |
Multibase Multi-Flex® 1047-2000 TPO Thermoplastic Polyolefin Elastomer Features: Chemical Resistance, Good PaintableOzone Resistant Thermal Stability, GoodDensity, LowTear Strength, Good Forms:PelletsProcessing Method:Injection Molding Uses: Automotive ApplicationsI.. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | Elastic; ASTM D638 |
Multibase Multi-Flex® A 7606 TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Heat StabilizedOzone ResistantGeneral Purpose Friction, Low Processability, Good Forms:PelletsProcessing Method:ExtrusionInjection Molding Uses: Automotive App.. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | ASTM D412 |
Teknor Apex APEX® 3200-68 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Sterilizable, Radiation Uses-Automotive Applications, Connectors, Non-specific Food Applications, Ge.. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | 100%; ASTM D412 |
Teknor Apex APEX® 3200-90 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Sterilizable, Radiation Uses-Automotive Applications, Connectors, Non-specific Food Applications, Ge.. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | ASTM D412 |
Teknor Apex APEX® 3300-68 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Sterilizable, Radiation Uses-Automotive Applications, Food Service Applications, General Purpose, Me.. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | ASTM D412 |
Teknor Apex Flexalloy® 3501-55-NT Polyvinyl Chloride Elastomer Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Features: Ultra High MW, Ethylene Oxide SterilizableForms-PelletsProcessing-Extrusion, Injection MoldingAppe.. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | 9.8 in/min; ASTM D638 |
Teknor Apex Sinvicomp SFC 7000 Polyvinyl Chloride, Flexible Availability: Asia Pacific Features: Foamable Uses: Footwear Forms: Pellets Processing Method: Injection MoldingInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | 9.8 in/min; ASTM D638 |
Teknor Apex Sinvicomp SFE 7500 Polyvinyl Chloride, Flexible Availability: Asia Pacific Features: Food Contact Acceptable; Non-Toxic Uses: Hose; Tubing Forms: Pellets Processing Method: ExtrusionInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 12.7 MPa | 1850 psi | at 100% elongation; ASTM D412 |
Lubrizol Estane® S195A Thermoplastic Polyurethane Type: Estane® S195A is a Shore 95A, polyester based thermoplastic polyurethane (TPU). FDA approved (21 CFR 177.2600, 177.1680).Uses: Injection Molding.Availability: Americas, Europe, Middle East, .. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | 9.8 in/min; ASTM D638 |
Teknor Apex Sinvicomp SPF 7020 Polyvinyl Chloride, Flexible Availability: Asia Pacific Features: Good Stiffness Uses: Gaskets; Profiles; Seals Forms: Pellets Processing Method: ExtrusionInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | ASTM D412 |
Teknor Apex UNIPRENE® 7010-40D Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
Tensile Strength, Yield | >= 12.8 MPa | >= 1850 psi | ASTM D638 |
Buckeye Polymers BP FLEX D0850(C) BLK Thermoplastic Polyolefin Product Information: TPO's are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment.Product Features:High tear resist.. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | ASTM D-638 |
Axiall 11600 Wire & Cable Flexible PVC Clear, non-staining speaker wire insulation and general purpose extrusion compound.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 12.8 MPa | 1850 psi | ASTM D-638 |
Axiall 10701 Wire & Cable Flexible PVC General purpose 80°C compound with good low temperature properties recommended for 15 mil wall and larger.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |