Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Tensile Strength, Yield = 180 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Tensile Strength, Yield 1.24 MPa
180 psi
at 200%, post cured- 2 hours at 177°C
Multibase SILASTIC® C7-4535 DICUP R Dow-Corning Biomedical Grade ETR Elastomer
Information provided by Multibase
Tensile Strength, Yield 1.24 MPa
180 psi
@ 50% Elongation; ASTM D1414
Greene Tweed CHEMRAZ® 504 Perfluoroelastomer
Greene Tweeds Chemraz® 504, a 65 Shore A hardness perfluoroelastomer, provides an extremely broad range of chemical resistance and is perfect for services with low pressures and/or low temperatur..
Tensile Strength, Yield 1.24 MPa
180 psi
at 200%, post cured- 2 hours at 177°C; ASTM D412
Multibase C6-235 PERKADOX PD-50S Dow-Corning Class VI Elastomer
Information provided by Multibase
Tensile Strength, Yield >= 1.24 MPa
>= 180 psi
Stress at Elongation M100; ASTM D412 Method A
Seals Eastern 7240 Ethylene-Propylene Rubber
Potable water service. Chloramine resistant.Information provided by Seals Eastern, Inc.
Tensile Strength, Yield 1.24 MPa
180 psi
ASTM D412
Saint-Gobain COHRlastic® R10490 Medium Fluorosilicone Sponge Rubber
Flexible, compressible COHRlastic silicone closed cell sponge is designed for high-performance gasketing, thermal shielding, vibration mounts and press pads. It is available in six constructions. R1..
Tensile Strength, Yield 1.24 MPa
180 psi
ASTM D412
Teknor Apex MONPRENE® MP 1880 Thermoplastic Elastomer
Information provided by Teknor Apex Company
Tensile Strength, Yield 1.24 MPa
180 psi
For 8% nominal density aluminum foam
ERG Aerospace Duocel® Aluminum Metal Foam
Tensile Strength, Yield 1.24 MPa
180 psi
Method A (Dumbbell & Section), 20 in/min, Break; ASTM D412
PolyOne Synprene® RT-3605 Thermoplastic Elastomer - SBC  (discontinued **)
Description/Features:Multi-Purpose Thermoplastic ElastomerNaturalApplications:General PurposeInteriorMarket:IndustrialConsumer GoodsProcessing Method:Injection MoldingInformation provided by PolyOne..
Copyright © lookpolymers.com All Rights Reserved