Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ISO 527 |
Polimeri Europa Riblene® GP 26 Low Density Polyethylene - Coating Grade Riblene GP 26 is a high fluidity low density polyethylene resin (LDPE).Main Applications: Riblene GP 26 is suitable for coating applications where low neck-in and high draw-down are key factors. F.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D412 |
Precision Polymer Engineering J70M Butyl Rubber Bromobutyl Rubber, 65-75 IRHD. Brominated isobutylene-isoprene copolymer. To meet BS3227 Grade 70 and ASTM D2000 line call-out MBA708, F17.Applications: Bromobutyl is resistant to the same fluids a.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D412 |
Precision Polymer Engineering N50C Nitrile Rubber Nitrile Butadiene Rubber, 45-55 °IRHD. High acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. To meet British Gas Specification BGC/PS/LC6 Class B, approval ref.: 67/6.11.iv. M.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D412 |
Precision Polymer Engineering N70C Nitrile Rubber Nitrile Butadiene Rubber (NBR), 65-75 °IRHD. High acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. To meet British Gas Specification BGC/PS/LC6 Class D, approval ref.: 31/6.1... |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D412 |
Precision Polymer Engineering N70J Nitrile Rubber Peroxide cured Nitrile Butadiene Rubber (NBR), 66-75 °IRHD. Copolymer of acrylonitrile and butadiene. To meet DTD 5594A standard for resistance to mineral oils.Applications: Excellent resistance i.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D412 |
Precision Polymer Engineering P60B Polyacrylate Rubber Polyacrylic or Polyacrylate Rubber, 55-65 °IRHD. Copolymer of ethyl acrylate and vinyl ether. ASTM & ISO designation = ACM.Applications: Extensively used in automotive transmission systems. Superi.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D412 |
Precision Polymer Engineering S50K Silicone Rubber Silicone Rubber, 45-55 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States Federal.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D 638 |
NOVA Chemicals Novapol® LF-0718-A-INJECTION LDPE Injection Molding Resin LF-0718-A complies with the U.S. FDA specifications for olefin polymers and may be used in the U.S. as an article or component of an article intended for use in contact with food. LF-0718-A is subj.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D412 |
Precision Polymer Engineering E50D Ethylene Propylene Rubber Sulphur cured, Ethylene Propylene Terpolymer, 46-55 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Formulated in accordance with BS2494 Type ‘W’. Water Research Council (WRC) teste.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ISO 527 |
Polimeri Europa Riblene® MT 10 R Low Density Polyethylene - Injection Molding Riblene MT 10 R is a low density polyethylene resin (LDPE) having an excellent fluidity.Parts made with Riblene MT 10 R are highly flexible.Main Applications: Riblene MT 10 R is suitable for inject.. |
|||
Tensile Strength, Yield | 9.03 MPa | 1310 psi | ASTM D638 |
Global SU-1018 Low Density Polyethylene, Injection Molding Grade
(discontinued **) Description-transparency, high toughness, flexibility, high impact strength, good chemical resistanceApplications-packagingMeets FDA requirements as listed in food additives regulation 21 CFR 117.15.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D638 |
Huntsman PE5050 Extrusion Coating Polyethylene
(discontinued **) Homopolymer, Drug Master File listed product, and FDA compliant.Features: High draw down, low neck-in, excellent heat sealability, and excellent adhesion.Applications: Extrusion: coating grade and t.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D638 |
ExxonMobil Escorene® LD-613 EVA Injection Molding Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.An 8.8% vinyl acetate copolymer resin designed for molding and extrusion applications requiring low temperatures, flexibility and toughness. This r.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D638 |
Huntsman PE1155 EVA Film Extrusion
(discontinued **) 1.5% Vinyl Acetate EVA Copolymer and FDA compliant.Features: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications:.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D638 |
Huntsman PE1356 EVA Film Extrusion
(discontinued **) 3.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: .. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | 50 mm/min; ASTM D638 |
ICO Polymers ICOTEXâ„¢ 520-5050 500 Micron LDPE Powder Description: ICOTEX 520-5050 is a low density polyethylene powder that has been developed to meet the special requirements of the textile coating industry. Key Characteristics: good melt flow and fa.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | |
LyondellBasell Lupolen® 1842 D SW 413 LDPE Cable sheathingData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | |
LyondellBasell Lupolen® 1852 H SW 413 LDPE Blow moldings, injection moldings.Data was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Tensile Strength, Yield | >= 9.00 MPa | >= 1310 psi | |
Kazanorgsintez PE2NT 15-10 Linear Low Density Polyethylene Production Method: Gaseous-phase method. Application: Composition is intended to be processed into a stretch film.Information Provided by Kazanorgsintez |
|||
Tensile Strength, Yield | 9.00 MPa @Temperature 100 °C |
1310 psi @Temperature 212 °F |
ASTM D638 |
Micropol Isoplas P651 Crosslinkable Polyethylene Information provided by Micropol Limited |
|||
Tensile Strength, Yield | 9.03 MPa | 1310 psi | ASTM D 638 |
LyondellBasell Hifaxâ„¢ CA10GC Thermoplastic Polyolefin Elastomer Description: Hifaxâ„¢ CA10GC fractional melt flow, 100 MPa flexural modulus, precolored, UV-stabilized, reactor grade, extrudable thermoplastic elastomeric olefin (TEO) resin combines good proces.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | |
LyondellBasell Lupolen® 1840 D LDPE, Film Grade FilmData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Tensile Strength, Yield | >= 9.00 MPa | >= 1310 psi | |
Sibur DSSK-2545-M27 Oil-Filled Styrene-Butadiene Rubber Buna VSL 5025-1. IN some compounding of rubber mixtures rubber can be used as replacement of butadiene styrene rubber and butadiene styrene rubber with preservation improvement of indexes of finish.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D638 |
UBE PAE1200U2 Electronic Grade Nylon Elastomer Description: UBESTA Nylon 12 has an excellent termite resistance than other plastics. UBESTA contributes as a material for jacket and sheath which lay for telephone and telegram Communication System.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | |
Trelleborg E669 EPDM Rubber EPM -- EPDM or Ethylene -- Propylene Rubber. EPM can only be vulcanized by peroxides or radiation; whereas EPDM can be vulcanized conventionally using sulphur.Properties:Excellent inherent high and .. |
|||
Tensile Strength, Yield | 9.00 MPa @Strain 300 % |
1310 psi @Strain 300 % |
ISO 527-1/-2 |
Covestro Desmopan® DP 1485A Polyurethane Extrusion- and injection molding gradesuitable for extrusion blow moldingvery large processing windowhigh melt stabilityBeadsApplicationBellowsHosesnon-reinforcedProfilesInjection molded engineering.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | |
Dow LDPE 959I Low Density Polyethylene DOW LDPE 959I resin is a medium molecular weight distribution homo polymer designed to offer excellent clarity and flexibility with low warpage for lids. This resin has good processability over a wi.. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D638 |
Huntsman PE1345 EVA Film Extrusion
(discontinued **) 3.4% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: .. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D638 |
Huntsman PE1403 EVA Film Extrusion
(discontinued **) 4% Vinyl Acetate EVA Copolymer, DMF listed and FDA compliantFeatures: High clarity film with good toughness and flexibility at low temperatures.Applications: Film extrusion: frozen food and general .. |
|||
Tensile Strength, Yield | 9.00 MPa | 1310 psi | ASTM D638 |
Huntsman PE1353 EVA Film Extrusion
(discontinued **) 3.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: .. |