Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ASTM D638 |
NYCOA 578 PA 6 very high viscosity molding & extrusion grade for tubing, pipes, film and tapesInformation provided by NYCOA, Inc. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ASTM D638 |
Nilit Polynil® C50 PA66/6 Co-Polymer Description: NYLON 66/6 copolymerApplication: CompoundingInformation provided by NILIT. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ASTM D638 |
Nilit Polynil® C50L Externally Lubricated PA66/6 Description: Polynil C50L shows better surface finish, flow and elongation than a comparable homopolymer. Key characteristics: Excellent flowHigh elongationGood impact strengthGood overall mechanica.. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ASTM D638 |
Nilit Polynil® P36 Very High Flow Nylon 66 Description: Very high flowApplication: CompoundingInformation provided by NILIT. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® DMX3415M PC Copolymer (Europe-Africa-Middle East) Lexan* DMX3415M is a co-polycarbonate resin with improved scratch and abrasion resistance compared to standard polycarbonate. Lexan* DMX3415M is available in transparent colors. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® DMX9455 PC Copolymer Lexan* DMX9455 is a standard flow, flame retardant, V0/1.5mm, opaque polycarbonate copolymer resin with improved scratch resistance.This data was supplied by SABIC-IP for the Americas region. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ISO 5271/2 |
Radici Radilon® CST 38FL (dry) Copolyamide 6 semiaromatic Radilon® CS can be used for blown film extrusion in general as well as being particularly suited for co-extrusion with PE because it improves the transparency and thermoformability of the film.Appl.. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP 9X06483 PA 46 LNP* Lubricomp* 9X06483 is a compound based on a Nylon 4/6 containing PTFE. Added feature of this grade is: Heat Stabilized. |
|||
Tensile Strength, Yield | 80.0 MPa @Temperature 23.0 °C |
11600 psi @Temperature 73.4 °F |
DAM; ISO 527 |
DuPont Performance Polymers Zytel® 7331J NC010 Nylon 6
(Unverified Data**) Zytel® 7331J NC010 is lubricated fast cycling PA6 resin for injection molding.Information provided by DuPont Performance Polymers |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | 50 mm/min; ISO Test |
BASF Capron® B85ZP Nylon 6 (DAM) (America)
(discontinued **) Not Impact modified.Information provided by BASF.Capron® is no longer a part of the BASF standard line. The BASF nylon products have been consolidated in the Ultramid ® line. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ISO 527-1/-2 |
Lanxess Pocan® BF 4409 000000 PBT, 7% Glass Fiber PBT, 7% glass fibers, injection molding, flame retardant |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ISO 527 |
SABIC Innovative Plastics LNP LUBRICOMP RX01514 PA 66 (Asia Pacific) LNP* Lubricomp* RX01514 is a compound based on Nylon 66 resin containing Proprietary Filler(s). Added features of this material include: Internally Lubricated. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP THERMOCOMP DF002H PC LNP THERMOCOMP* DF002H is a compound based on Polycarbonate resin containing 10% Glass Fiber. Added feature includes: Healthcare. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ASTM D 638 |
SABIC Innovative Plastics LNP Thermocomp KF003 Acetal Copoly (Asia Pacific) LNP* Thermocomp* KF003 is a compound based on Acetal Copolymer resin containing Glass Fiber.This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics NORYL IGN5531 PPE+PS Noryl* IGN5531 is an 20% glass fiber reinforced, injection moldable grade. This modified polyphenylene ether resin is designed to deliver a balance of heat, strength and electrical properties. Nor.. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL IGN5531 PPE+PS (Asia Pacific) Noryl* IGN5531 is an 20% glass fiber reinforced, injection moldable grade. This modified polyphenylene ether resin is designed to deliver a balance of heat, strength and electrical properties. Nor.. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics NORYL LTA1350 PPE+PS (Asia Pacific) Noryl* LTA1350 is an unfilled, injection moldable grade. Designed for improved long term heat aging, this resin also uses non-chlorinated, non-brominated FR additives to achieve a V0 UL94 rating. No.. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics NORYL LTA1350 PPE+PS (Europe-Africa-Middle East) Noryl* LTA1350 is an unfilled, injection moldable grade. Designed for improved long term heat aging, this resin also uses non-chlorinated, non-brominated FR additives to achieve a V0 UL94 rating. No.. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ASTM D638 |
PlastxWorld Veroplas PB5300 Nylon 66 general purpose, 30% mineral filled injection molding gradeInformation provided by PlastxWorld Inc. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ISO 527-1/-2 |
DSM Akulon® K225-KWS (Dry) Nylon 6 (North America) Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis.. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | dry; ISO 527-1/-2 |
DSM Stanyl® TS350 PA46 FR(17) Unreinforced, Flame Retardant |
|||
Tensile Strength, Yield | 80.0 MPa @Temperature 22.8 °C |
11600 psi @Temperature 73.0 °F |
ASTM D638 |
Ensinger Tecapeek® CLASSIX XRO Polyetheretherketone (PEEK) TECAPEEK™ high performance polymer, made from Victrex PEEK polymer, has successfully replaced glass, stainless steel and titanium in a growing range of medical applications. The material's excepti.. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | 50 mm/min; ISO 527 |
Eurostar Starflam AFR200B PA66, Flame Retardant, Injection Molding Staramide AFR200B is an Unfilled, Flame Retardant Polyamide 66, Injection Molding ResinInformation provided by Eurostar. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | 50 mm/min; ISO 527 |
Chi Mei Kibisan® PN-127H SAN Chemical Resistant |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | 2 in/min; ASTM Test |
BASF Ultramid® A27 E 01 PA66 (Dry) Ultramid A27 E 01 is a low-viscosity, general-purpose PA66 grade for compounding. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation ".. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ISO 527-1/-2 |
DSM Akulon® S240-C Nylon 66 (European Grade) (Dry)
(discontinued **) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier .. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ISO 527-2 |
Ascend Performance Materials Vydyne® R515H Nylon 66, 15% Glass Reinforced, Conditioned Vydyne® R515H is general-purpose, heat-stabilized, hydrolysis-resistant, 15% glass-fiber reinforced PA66 resin. Available in natural it is specifically designed to maximize the retention of physica.. |
|||
Tensile Strength, Yield | >= 80.0 MPa | >= 11600 psi | ASTM-D638 |
Polyram PlusTek RA502 Nylon 6.6, Flame Retardant Polyamide 6.6, flame retardant for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | ASTM D638 |
Solvay TECHNYL® 2210HS PA66, DRY Description: Polyamide 66, unfilled, long-term stabilized, lubricated for injection molding.Available in: Asia Pacific Product Applications: TECHNYL® 2210HS is used in all sectors of industry, offe.. |
|||
Tensile Strength, Yield | 80.0 MPa | 11600 psi | 50 mm/min; ISO 527-1/-2 |
BASF Ultramid® B3UGM210 GR 22866 10/50% Glass/Mineral Filled PA6 FR (Conditioned) Description: Halogen- and phosphorus-free injection-molding grade with very high rigidity, low smoke density and outstanding electrical properties.Information provided by BASF |