Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Film Tensile Strength at Break, MD | 38.6 MPa | 5600 psi | ASTM D882 |
M. Holland Company LL104 LLDPE
(discontinued **) Additives: Antiblock, SlipFeatures: Unspecified Antiblocking, Butene Comonomer, Copolymer, Good Drawdown, Good Processability, Unspecified SlipUses: Film, LinersApprovals: FDA 21 CFR 177.1520(c) 2.2.. |
|||
Film Tensile Strength at Break, MD | 38.6 MPa | 5600 psi | 50 µm (2 mil) film; ASTM D882 |
DuPont Nucrel® 1202HC Ethylene-Methacrylic Acid Copolymer Resin for Blown and Cast Film 11.5 wt% Methacrylic Acid.Nucrel® 1202HC (High-Clarity) is an ethylene-methacrylic acid copolymer resin available for use in conventional blown and cast film extrusion and coextrusion equipment des.. |
|||
Film Tensile Strength at Break, MD | 38.6 MPa | 5600 psi | |
Dow Elite® 5200 Linear Low Density Polyethylene 5200 enhanced polyethylene resin is a copolymer produced via INSITE Technology from Dow Plastics. This resin offers high impact strength and good puncture resistance at moderate stretch levels for .. |
|||
Film Tensile Strength at Break, MD | 38.6 MPa | 5600 psi | ASTM D882 |
Bapolene® 122F Polyethylene, Film Grade Bapolene LL122F is a general purpose LLDPE for blown film extrusion applications. This resin offers excellent tensile and toughness properties. Contains medium levels of slip/antiblock additives. .. |