Polymer Property : Film Tensile Strength at Yield, MD = 26.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	26.0 MPa	3770 psi	ASTM D882
NOVA Chemicals Sclair® 19H Homopolymer HDPE Film Resin Features: High stiffnessGood processability Low gel Applications: BlendingCo-extrusionInformation provided by Nova Chemicals
Film Tensile Strength at Yield, MD	26.0 MPa	3770 psi	ASTM D882
Eastman 1925F Polyethylene Film (discontinued **) Polyethylene 1925F is a low density formulation with medium slip and medium antiblock. It is suggested for film applications that require heat-sealing treated-to-treated film surfaces and where good..
Film Tensile Strength at Yield, MD	26.0 MPa	3770 psi	Blown film; ASTM D882
Chevron Phillips Marlex® HHM TR-140 Polyethylene, Film Grade; HDPE (discontinued **) FDA approved.Data provided by the manufacturer
Film Tensile Strength at Yield, MD	26.0 MPa	3770 psi	ASTM D882
Braskem ES 300 HDPE Blown Film Extrusion Polyethylene (discontinued **) 38µm film gauge, obtained in 75mm extruder, die gap 1.0mm, output 1.75 kg/h-cm with 2:1 BUR. Applications: Grocery and T-shirt bags; merchandise bags; frozen-food bags; high-strength films. Informa..
Film Tensile Strength at Yield, MD	26.0 MPa	3770 psi	ASTM D882
Braskem HM 150 HDPE Monofilament Polyethylene (discontinued **) Applications: Raschel; flat yarn; general and industrial rape netting. Information provided by Braskem
Film Tensile Strength at Yield, MD	26.0 MPa	3770 psi	2 in per min; ASTM D882
Chevron Phillips K-Resin® KR10 Styrene-Butadiene Copolymer, Film Grade (discontinued **) Styrene-Butadiene Copolymer. Properties below based on 1 mil ( 0.025 mm) film; 2.5:1 Blow Up Ratio; 35 mil (0.90 mm) die gap.Customer Benefits: This SBC is easily processed on blown film or cast fi..
Film Tensile Strength at Yield, MD	26.0 MPa @Temperature 23.0 Â°C	3770 psi @Temperature 73.4 Â°F	ASTM D638
Mapal Plastics Maplon Type O Polypropylene Sheet Properties: Corona treated on both sides for offset and screen printing, Extended shelf life, Low stress whitening, Suitable for die cuttingApplications: Stationery products, Offset printed item
Film Tensile Strength at Yield, MD	26.0 MPa @Temperature 23.0 Â°C	3770 psi @Temperature 73.4 Â°F	ASTM D638
Mapal Plastics Maplon Type S Polypropylene Sheet Properties: Low stress whitening, Suitable for die cutting, Corona treated on both sides for offset and screen printingApplications: Stationery, Packaging, House-hold productsand printed items
Film Tensile Strength at Yield, MD	26.0 MPa	3770 psi	2 in per min; ASTM D882
Chevron Phillips K-Resin® DK11 Styrene-Butadiene Copolymer, Film Grade Styrene-Butadiene Copolymer. Properties below based on 1 mil ( 0.025 mm) film; 2.5:1 Blow Up Ratio; 35 mil (0.90 mm) die gap.Customer Benefits: Provides the same high performance film properties as..
Film Tensile Strength at Yield, MD	26.0 MPa	3770 psi	ASTM D882
Eastman D4036-F Polyethylene (discontinued **) D4036-F is a low density formulation with high slip and high antiblock. It is suggested for film applications requiring a good balance of properties, such as converter film for industrial and gener..
Film Tensile Strength at Yield, MD	26.0 MPa	3770 psi	ASTM D882
Eastman E6838-963F Polyethylene (discontinued **) E6838-963F is a low density formulation with medium slip and medium antiblock. It is suggested for film applications that require a good balance of physical and optical properties.List of Applicati..