Polymer Property : Izod Impact, Notched (ISO) = 4.52 ft-lb/in² Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180/A
Victrex® PEEK 600G Polyetheretherketone (discontinued **) Product Description: High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, low viscosity, FDA food conta..
Izod Impact, Notched (ISO)	9.50 kJ/mÂ²	4.52 ft-lb/inÂ²	Type 1, Notch A; ISO 180
Solvay Specialty Polymers AmodelÂ® AS-1933 HS Polyphthalamide (PPA), 33% Glass Fiber AmodelÂ® AS-1933 HS is a 33% glass reinforced grade of polyphthalamide (PPA) resin developed specifically for improved performance in a 50/50 ethylene glycol and water environment. This material e..
Izod Impact, Notched (ISO)	9.50 kJ/mÂ²	4.52 ft-lb/inÂ²	Notch A; ISO 180
Solvay Specialty Polymers RytonÂ® BR42B Polyphenylene Sulfide (PPS), 40% Glass Fiber RytonÂ® BR42B 40% glass fiber reinforced polyphenylene sulfide compound is specially formulated to provide low coefficient of friction and reduced wear rate for use in applications requiring low s..
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180-93
Wellman Wellamid® GF33AO99-HRBK 33% Glass Fiber Reinforced, Hydrolysis Resistant Nylon 66 Description: Glass Fiber Reinforced, Hydrolysis Resistant Nylon 66Information provided by Wellman.
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180
Polyram RamShine PV527 Acrylonitrile Butadiene Styrene, Flame Retardant Flame retardant ABS for injection molding applications.Information provided by Polyram.
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180
Polyram RamSter RF303G6 PBT, 30% Glass Fiber, Industrial Grade Industrial Grade, 30% glass fiber reinforced PBT for injection molding applications.Information provided by Polyram.
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180/1A
Total Polystyrene Impact 6540 Easy Flow Impact Polystyrene POLYSTYRENE IMPACT 6540 is an easy flowing, high impact polystyrene with a good balance of mechanical and thermal properties. This resin combines physical properties such as the flow necessary for ..
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180
Polyram RamTough RZ321G2 Polycarbonate, 10% Glass Fiber, Flame Retardant 10% Glass fiber reinforced, flame retardant polycarbonate for injection molding applications.Information provided by Polyram.
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ASTM D256
Total PSI 3351 High Heat Resistance Impact Polystyrene Total Petrochemicals Polystyrene 3351 is a high heat resistance, high impact polystyrene for injection molding. It is recommended for the manufacturing of articles which require good dimensional st..
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180
Polyram PlusTek PB300G4 Nylon 6 for Injection Molding, 20% Glass-Fiber Reinforced 20% Glass fiber reinforced, heat stabilized Nylon 6 for injection molding applications.Information provided by Polyram.
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180
Polyram RamTough RZ320G2 Polycarbonate, 10% Glass Fiber, Flame Retardant 10% Glass fiber reinforced, flame retardant polycarbonate for injection molding applications.Information provided by Polyram.
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180/1A
DuPont Performance Polymers Rynite® 530 BK503 Polyethylene Terephthalate (PET) (Unverified Data**) 30% Glass Reinforced Polyethylene Terephthalate Rynite 530 BK503 is a 30% glass reinforced modified polyethylene terephthalate with outstanding balance of strength stiffness and toughness excellent ..
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	Conditioned; ISO 180/1A
Addiplast Addinyl A2I V25 Flame Retardant Nylon 66, 25% Glass Filled Flame retardant, 25% glass fiber reinforced, halogen freeInformation provided by Addiplast.
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO Test
BASF Petra® 130 BK-112 30% Glass Filled PET Petra 130 BK-112 is a 30% glass fiber reinforced, black pigmented polyethylene terephthalate injection molding compound. It exhibits a combination of performance properties including good strength ..
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO Test
BASF Petra® 7030 GY6128 30% Glass Filled PET Petra 7030 GY6128 is a grey pigmented, high flow 30% glass fiber reinforced injection molding compound based on post-consumer and post-industrial recycled polyethylene terephthalate feedstock. It o..
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO Test
BASF Ultramid® A27 E 01 PA66 (Conditioned) Ultramid A27 E 01 is a low-viscosity, general-purpose PA66 grade for compounding. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "..
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180/1A
Addiplast Addinyl A2H V25 Flame Retardant Nylon 66, 25% Glass Filled Flame retardant, 25% glass fiber reinforced, with halogensInformation provided by Addiplast.
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO Test
BASF Ultramid® A3EG7 BK00564 35% Glass Filled PA66 (Dry) Ultramid A3EG6 BK00564 is a 35% glass fiber reinforced injection molding PA66 grade for machinery components and housings of high stiffness and dimensional stability.
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO Test
BASF Ultramid® A3EG7 BK23189 35% Glass Filled PA66 (Dry) Ultramid A3EG6 BK23189 is a 35% glass fiber reinforced injection molding PA66 grade for machinery components and housings of high stiffness and dimensional stability.
Izod Impact, Notched (ISO)	9.50 - 17.9 kJ/m²	4.52 - 8.52 ft-lb/in²	Average value: 12.8 kJ/m² Grade Count:5
Overview of materials for Polycarbonate, Glass + PTFE Filled This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, Glass + PTFE Filled". Each property range of values reported is minimum and maximum value..
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180/1A
Solvay Specialty Polymers Amodel® AS-1933 HS Polyphthalamide (PPA) (Unverified Data**) Amodel AS-1933 HS is a 33% glass reinforced grade of polyphthalamide (PPA) resin developed specifically for improved performance in a 50/50 ethylene glycol and water environment. This material excee..
Izod Impact, Notched (ISO)	9.50 kJ/m² @Temperature 23.0 °C	4.52 ft-lb/in² @Temperature 73.4 °F	ISO 180/1A
BASF Ultramid® A3HG5 LS BK 23189 25% Glass Filled PA66 (Dry) Description: 25% glass fiber reinforced injection molding grade for machinery components and housings of high stiffness and dimensional stability such as coil formers and bearing cages. Also used fo..
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180
LNP Thermocomp® JF-1006 Polyethersulfone, Glass Fiber Reinforcement (discontinued **) Forms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names..
Izod Impact, Notched (ISO)	9.50 kJ/m²	4.52 ft-lb/in²	ISO 180/A
Victrex® PEEK 650G Polyetheretherketone Product Description: High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, low viscosity, FDA food conta..
Izod Impact, Notched (ISO)	9.50 kJ/m² @Temperature 23.0 °C	4.52 ft-lb/in² @Temperature 73.4 °F	ISO 180/A
Victrex® PEEK 450CA20 Polyetheretherketone, 20% Carbon Fibre Reinforced Product Description:High performance thermoplastic material, 20% carbon fibre reinforced Polyetheretherketone (PEEK), semi crystalline, granules for injection moulding and extrusion, standard flow, ..