Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Stress | 32.0 MPa | 4640 psi | 50 mm/min; ISO 527-1,-2 |
Inno-Comp INNOPOL® CS 1-7120 AP 20% Talc Filled Polypropylene Homopolymer INNOPOL® CS 1-7120 is a 20 % talc-filled polypropylene homopolymer compound. This grade is available in natural and custom colored form.INNOPOL® CS 1-7120 is recommended for extrusion of sheet.. |
|||
Tensile Stress | 32.0 MPa | 4640 psi | at Break; ISO 527 |
Iran Petrochemical (PCC) BL2 HF 4750 High Density Polyethylene BL2 is a high density polyethylene with 1-Butene as co monomer. It is high impact strength and slightly, lower stiffness than BL3, outstanding resistance to stress cracking, even in contact with su.. |
|||
Tensile Stress | 32.0 MPa | 4640 psi | at Break; ISO 527 |
Iran Petrochemical (PCC) BL3 HF 4760 High Density Polyethylene BL3 is a high density polyethylene with 1-Butene as co monomer. It is high density and stiffness, good ESCR, high rigidity, good flowability and impact strength.Applications: small blow molding, bo.. |
|||
Tensile Stress | 32.0 MPa | 4640 psi | at Break; ISO 527 |
Iran Petrochemical (PCC) EX 1 HF 7740F High Density Polyethylene EX1 is a high density polyethylene with 1-Butene as co monomer. It has acceptable tear strength, medium molar mass and narrow molar mass distribution.Applications: stretched film and tapes for prod.. |
|||
Tensile Stress | 32.0 MPa | 4640 psi | ASTM D638 |
Iran Petrochemical (PCC) Moplen Z 30 G Polypropylene Moplen Z 30 G is a high flow homopolymer for injection molding and compounding applications. Moplen Z 30 G exhibits a high stiffness and an outstanding processability for shorter cycle times and eas.. |
|||
Tensile Stress | 32.0 MPa | 4640 psi | at Break; ISO 527 |
Iran Petrochemical (PCC) BL 3VD HH 4765 High Density Polyethylene BL3VD is a high density polyethylene with 1-Butene as co monomer. It is very high density and stiffness, good ESCR, high flowability and impact strength.Applications: small blow molding, bottles, c.. |
|||
Tensile Stress | 32.0 MPa | 4640 psi | Break, (50mm/min); ISO 527-2, -1A |
Topas Advanced Polymers TOPAS® IT X1 Cyclic Olefin Copolymer (COC) TOPAS® IT X1 is an injection molding grade with heat and impact resistance. It is a moderately clear resin with high moisture barrier, chemical and heat resistance, making it suitable for products .. |
|||
Tensile Stress | 32.0 MPa @Strain 1.00 %, Time 3.60e+6 sec |
4640 psi @Strain 1.00 %, Time 1000 hour |
DIN 53444 |
Wolf Kunststoff ZEDEX® ZX-324V1T A3H PEEK Polymer, Reinforced Main Characteristics: High resilience; High elasticity; Low permanent deformation; Stress resistant; High strength at temperatures above 140 ° CApplications: Shipbuilding; Chemical Engineering; Aut.. |