Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 96.5 MPa | 14000 psi | ASTM D638 |
Niche Polymer PPHG40BK Homopolymer PP, 40% Glass Fiber Filled Information provided by Niche Polymer |
|||
Tensile Strength at Break | 96.5 MPa | 14000 psi | ASTM D638 |
Polymer Resources NY66-M40-[color]-H Nylon 66, 40% Mineral Filled, Heat Stabilized Nylon 66, 40% Mineral Filled, Lubricated, Heat StabilizedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Nylon .. |
|||
Tensile Strength at Break | 96.5 MPa | 14000 psi | ASTM D638 |
Polymer Resources PPX-FRG20 Modified-PPO, V-1 Flame Retardant, 20% Glass Reinforced Modified-Polyphenylene Oxide, V-1 Flame Retardant, 20% Glass ReinforcedFeatures: • Bromine Free • Chlorine FreeProcess: Injection MoldingNotes: All physical, mechanical and thermal testing condu.. |
|||
Tensile Strength at Break | 96.5 MPa | 14000 psi | ASTM D638 |
Ravago Manufacturing Americas Hylon® N1013TL Nylon 6/6 (DAM) Information provided by Ravago. |
|||
Tensile Strength at Break | 96.5 MPa | 14000 psi | ASTM D638 |
Polymer Resources NY66-IMG13 Nylon, 13% Glass Reinforced, Impact Modified (DAM) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Nylon grades are tested dry as molded (DAM).Information provide.. |
|||
Tensile Strength at Break | 96.5 MPa | 14000 psi | ASTM D638 |
Polymer Resources PPX-FRG20 Modified PPO, UL 94 V-1, 20% Glass Reinforced
(Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation. |
|||
Tensile Strength at Break | 96.5 MPa | 14000 psi | ASTM D638 |
MRC Polymers EMAREXâ„¢ 400 GF13 Nylon 6/6, 13% Glass Fiber Filled Available in Black onlyCan be UV and Heat StabilizedProperty data for DAM samples.Information provided by MRC Polymers Inc. |
|||
Tensile Strength at Break | 96.5 MPa | 14000 psi | ASTM D638 |
A. Schulman SCHULADUR® A GF15 15% Glass Fiber Reinforced PBT Information provided by A. Schulman. |
|||
Tensile Strength at Break | 96.5 MPa | 14000 psi | ASTM D638 |
Chase Plastics CP Pryme® PC320GR Polycarbonate (Utility Grade), 20% Glass Fiber Reinforced, Mold Release Information provided by Chase Plastics. |
|||
Tensile Strength at Break | 96.5 MPa | 14000 psi | ASTM D638 |
PlastxWorld CEVIAN® A2604 20% GF PA/ABS Alloy, DAM Property data is for dry as molded (DAM) samples.These are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc. |