Polymer Property : Tensile Strength at Break = 4800 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	33.1 MPa	4800 psi	2 in/min; ASTM D638
RheTech Products M12P100-01 12% Mica Reinforced Polypropylene, Black Applications: Fan shroudsAir ductsFiller panelsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	33.1 MPa	4800 psi	2 in/min; ASTM D638
RheTech Products T10P100-00 10% Talc Reinforced Polypropylene, Natural Applications: Consumer goodsIP structural componentsInterior trimInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	33.1 MPa	4800 psi	2 in/min; ASTM D638
RheTech Products T10P100-01 10% Talc Reinforced Polypropylene, Black Applications: Consumer goodsAir ductsUnderhood componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	33.1 MPa	4800 psi	2 in/min; ASTM D638
RheTech Products T10UP100-01 10% Talc Reinforced Polypropylene Copolymer, General Purpose Black, UL94 HB Rated Applications: Wire troughElectrical componentsConsumer goodsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	33.1 MPa	4800 psi	TM R050-36
Resinlab® EP1325 Thixotropic, Heat Curing Epoxy Adhesive Resinlab™ EP1325 and EP1325LV are one part thixotropic, heat curing epoxy adhesives. They can also be used as a small mass potting compounds, staking or damming adhesives, or polymer systems where ..
Tensile Strength at Break	33.1 MPa	4800 psi	2 in/min; ASTM D638
RheTech Products HP506-01A 21% Talc Reinforced High Performance Polypropylene, UV Stabilized, Black Applications: Automotive interior applicationsHVAC ductsTail lamp housingsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	33.1 MPa	4800 psi	ASTM D638
Albis Plastics Cellulose Acetate CA700 , Unreinforced, 29% Plasticizer (discontinued **) Amorphous Cellulose Acetate (CA)Characteristics: Chemical Resistance, Toughness, Strength, Hardness, Gloss, Clarity and "Feel"Applications: Tool Handles, Optical Products, Toys and Sheet ProductsPro..
Tensile Strength at Break	33.1 MPa	4800 psi
Indium Corp. Indalloy 149 Tin-Lead Solder Alloy Information Provided by Indium Corporation
Tensile Strength at Break	33.1 MPa	4800 psi
Green Dot TerratekÂ® SC 50 Polypropylene - Wheat Starch Biocomposite TerratekÂ® SC 50 is a proprietary blend of wheat starch and polypropylene for injection molding applications. SC 50 contains 50% wheat starch by weight, however, a range of properties can be achie..
Tensile Strength at Break	33.1 MPa	4800 psi	2.0 in/min; ASTM D638
LTL Color Compounds ColorFastÂ® PBA1000 PBT/ABS Alloy PBT/ABS alloy with excellent physical properties and chemical resistanceAll information provided by LTL Color Compounders, Inc.
Tensile Strength at Break	33.1 MPa	4800 psi	Type I, 51 mm/min; ASTM D638
Styron MAGNUMâ„¢ 357 HP Acrylonitrile Butadiene Styrene (ABS) Resin Overview: MAGNUMâ„¢ ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositi..
Tensile Strength at Break	33.1 MPa	4800 psi	ASTM D638
Techmer ES PlastiblendÂ® ABS CR X Availability: North AmericaForms: PelletsFeatures: Good Chemical ResistanceProcessing Method: Injection MoldingInformation provided by TP Composites, Inc.
Tensile Strength at Break	33.1 MPa	4800 psi	ASTM D638
Techmer ES PlastiblendÂ® ABS CR X BK Availability: North AmericaForms: PelletsFeatures: Good Chemical ResistanceUses: Electrical PartsAppearance: BlackInformation provided by TP Composites, Inc.
Tensile Strength at Break	33.1 MPa	4800 psi	transverse direction; ASTM D882
A. Schulman CP842-01 Hexene Copolymer LLDPE Resin DescriptionCP 842-01 is a Hexene copolymer LLDPE resin designed for use in blown film applications. Blow up ratios of2:1 or higher are recommended. ApplicationTypical applications of CP 842-01 incl..
Tensile Strength at Break	33.1 MPa	4800 psi	transverse direction; ASTM D882
A. Schulman CP842-01 Hexene Copolymer LLDPE Resin DescriptionCP 842-01 is a Hexene copolymer LLDPE resin designed for use in blown film applications. Blow up ratios of2:1 or higher are recommended. ApplicationTypical applications of CP 842-01 incl..
Tensile Strength at Break	33.1 MPa	4800 psi	transverse direction; ASTM D882
A. Schulman CP842-01 Hexene Copolymer LLDPE Resin DescriptionCP 842-01 is a Hexene copolymer LLDPE resin designed for use in blown film applications. Blow up ratios of2:1 or higher are recommended. ApplicationTypical applications of CP 842-01 incl..
Tensile Strength at Break	33.1 MPa	4800 psi	ASTM D638
Chesterton ARC 897 Fine Grade Sliding Wear Compound Description: ARC 897 is an advanced ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a t..
Tensile Strength at Break	33.1 MPa	4800 psi	ASTM D638
Eastman Tenite 360A4000012 Propionate Clear, Trsp Tenite cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties if Tenite cellulosi..
Tensile Strength at Break	33.1 MPa	4800 psi	ASTM D638
Eastman Tenite 360E461312 Propionate Clear, Trsp Tenite cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite cellulosi..
Tensile Strength at Break	33.1 MPa	4800 psi	ASTM D638
Eastman Tenite 371A4000012 Cellulose Acetate Propionate, Clear, Trsp Applications:OphthalmicsOral HygienePen/stationary suppliesToothbrushesProduct Description: Tenite cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, st..
Tensile Strength at Break	33.1 MPa	4800 psi	Sintered Molding; ASTM D4894-98a
3M Dyneon™ TFM™ 1700 PTFE Meets ASTM D4894 Type III, Grade 1 resinNon-free-flowing compression molding powderVery fine particle sizeDense polymer structure, low permeabilityImproved weldabilityLow deformation under loadGood ..
Tensile Strength at Break	33.1 MPa	4800 psi	Sintered Molding; ASTM D4894-98a
3M Dyneon™ TFM™ 1705 PTFE Non-free-flowing resinReduced, adjusted melt viscosityIncreased gel stabilityReduced cold flowLower porosity and permeabilityLower void contentExcellent non-stick and dielectric propertiesHigher ela..
Tensile Strength at Break	33.1 MPa	4800 psi	cured, grit-blasted steel; ASTM D2095
3M Scotch-Weld™ SF20 Super Fast Instant Adhesive 3M™ Scotch-Weld™ Super Fast Instant Adhesives rely less on surface moisture for cure speed than standard cyanoacrylates. They are designed to join together difficult-to-bond plastics and rubbers, ..
Tensile Strength at Break	33.1 MPa	4800 psi	ASTM D3574
3M Scotch® 3311 Foil Tape Scotch® Foil Tape 3311 is an aluminum alloy foil with a pressure-sensitive adhesive and paper liner. The aggressive rubber adhesive sticks well to most surfaces and the paper liner makes for conven..
Tensile Strength at Break	33.1 MPa	4800 psi	TM R050-36
Resinlab® EP1285HD-10 Highly Filled, Medium Viscosity Casting Resin Resinlab™ EP1285 (Formerly Lab Product W021901 series) is a highly filled, medium viscosity black casting resin designed for applications requiring a high degree of thermal conductivity and a low C..
Tensile Strength at Break	33.1 MPa	4800 psi	2" (50mm) per min.; ASTM D638 Type IV
Formosa Plastics Formolene® HP3902 Pipe HDPE Natural Medium Density Hexene CopolymerApplications: Pipe for gas distribution, oilfield and other industrial pipe, telecommunications conduit.Formolene HP3902 is a high performance copolymer that i..