Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 31.0 MPa | 4500 psi | |
Plastcom SLOVALEN PH 71 T 20 PP, 20% mineral filling FeaturesModified homopolymer PP for injection moulding with the content of 20% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased shr.. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | 2 in/min; ASTM D638 |
RheTech Products HP532-01 20% Talc Reinforced High Performance Polypropylene, Non-UV Stabilized, Black Applications: Close out panelSpeaker grilleInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | 2 in/min; ASTM D638 |
RheTech Products T12P600-01BG 12% Talc Reinforced Polypropylene Copolymer, General Purpose Black, Blow Molding Grade Applications: Flipper panelClose out panelSeat backsLoad floorInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | 2 in/min; ASTM D638 |
RheTech Products T20P100-00UV 20% Talc Reinforced Polypropylene, UV Stabilized, Natural Applications: Electronic housingsConsolesIP componentsInterior trimDurable goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | 2 in/min; ASTM D638 |
RheTech Products T20P100-01UV 20% Talc Reinforced Polypropylene, UV Stabilized, General Purpose Black Applications: Durable goodsElectronics housingsIP componentsClose out panelsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Cycolac® FR15 ABS Flame retardant ABS (non-PBBE additive). Good property/toughness. Excellent moldability. UL94 V-0/5VA rated. |
|||
Tensile Strength at Break | >= 31.0 MPa | >= 4500 psi | ASTM D638 |
Niche Polymer PPHM15BK Homopolymer PP Information provided by Niche Polymer |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | ASTM D638 |
Petromont 7000 Medium Density Polyethylene Resin Petromont HDPE 7000 is a medium-density polyethylene hexene modified resin with an excellent balance of chemical resistance and durability. It is readily processed by blown sheet or flat die extrusi.. |
|||
Tensile Strength at Break | 31.0 MPa @Temperature 23.0 °C |
4500 psi @Temperature 73.4 °F |
ISO 527 (1BA bar) |
DuPont Performance Polymers Hytrel® HTR237BG BK320 TPC-ET
(Unverified Data**) Hytrel® HTR237BG is designed for blow molding or processing techniques requiring high viscosity. It has nominal durometer hardness of 45D, is pigmented black with fine particle size carbon black an.. |
|||
Tensile Strength at Break | <= 31.0 MPa | <= 4500 psi | ISO/R527 |
Polykemi AB POLYfill PPH T2040 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | 2 in/min; ASTM D638 |
Ineos K44-15-186 Polyethylene Copolymer K44-15-186 is a blue high-density polyethylene copolymer designed specifically for extrusion of pipe by blending K44-15-122 natural resin with G38-70C BLU II concentrate or an approved equivalent. I.. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | 50 mm/min; ISO 527-1,-2 |
Ineos ABS Lustran® ABS 970 Lustran® ABS 970 has high impact strength and good paintability. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | ASTM D 638 |
LyondellBasell Hostacomâ„¢ BA742EC Polypropylene Copolymer Description: Hostacomâ„¢ BA742EC low melt flow, 1,200 MPa flexural modulus, precolored, extrusion grade polypropylene copolymer has a good balance of strength, stiffness, impact resistance and pr.. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP THERMOCOMP WH0270F PBT LNP* Thermocomp* WH0270F is a dense compound based on PBT. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | ASTM D 638 |
SABIC Innovative Plastics LNP Thermocomp WH0500B PBT LNP* THERMOCOMP* WH0500B is a compound based on Polybutylene Terephalate resin containing High Specific Gravity Filler. Added features of this material include: High Specific Gravity.This data was .. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | Type I, 5 mm/min; ASTM D 638 |
SABIC Innovative Plastics LNP Thermocomp WH0270FX_WH5A289 PBT 2.7 specific gravity PBTThis data was supplied by SABIC-IP for the Americas region. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | ASTM D 638 |
Cossa Polimeri ESTADIENE 1016 T V0 Flame Retardant ABS Acrylonitrile Butadiene StyreneFlame retardant class V0, with PBDE, high thermal resistance, good physical and mechanical characteristics, excellent processabilityInformation provided by Cossa Polim.. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | ASTM D 638 |
Cossa Polimeri ESTADIENE 1030 V0/F Flame Retardant ABS Acrylonitrile Butadiene StyreneFlame retardant class V0, PBDE free, high melt flow rate, good impact resistance, high gloss, good light resistance, excellent processabilityInformation provided by Co.. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | Molded and tested in accordance with ASTM D4976; ASTM D638 |
Dow UNIVAL™ DMDA-6200 NT 7 High Density Polyethylene Resin (HDPE) Moderate swell Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a UNIVAL™ DMDA-6200 NT 7 is a multipurpose polymer designed for high speed production of blow molded containers used to package househol.. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | ASTM D1457 |
Asahi Glass Fluon® CD076 PTFE Coagulated Dispersion Powder Fluon®PTFE coagulated dispersion powders (fine powders) are used for paste extrusion to make tapes, tubes, rods and wire coatings.Information provided by Asahi Glass Company, Inc. |
|||
Tensile Strength at Break | 31.0 - 48.0 MPa | 4500 - 6960 psi | ASTM D638 |
Arkema Group KYNAR® 460 Polyvinylidene Fluoride Homopolymer - Extrusion Characteristics: Natural resin - translucent, off-white hemispheres. Broad molecular weight distribution. High stability in harsh thermal, chemical and ultraviolet environments. High toughness a.. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | ASTM D638 |
PlastxWorld CEVIAN® A1500 PA/ABS Alloy, Conditioned Property data is for samples at equilibrium moisture (2.0%)Information provided by PlastxWorld Inc. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | ASTM D3756 |
3M 2307 Masking Tape 3M™ Masking Tape 2307 is a general purpose masking tape for holding, bundling, sealing, general paint masking and a vast number of other jobs where a pressure-sensitive tape is needed.Information p.. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | |
UBE C (Low-Cis) HIPS (n-DM =0.03 wt %) Description: UBE high impact polystyrene (HIPS).Information provided by UBE. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | ASTM D638 |
A. Schulman POLYFLAM™ E-15937B High Strength Impact Modified Polypropylene DescriptionPolyfort® E-15937B is a high strength impact modified polypropylene.Information provided by A. Schulman. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | ASTM D638 |
SABIC Innovative Plastics LNP STAT-KON QD000I PA 6/10 (Asia Pacific) LNP STAT-KON* QD000I is a compound based on Nylon 6/10 resin containing Carbon Powder. Added features of this material include: Electrically Conductive. |
|||
Tensile Strength at Break | 31.0 MPa | 4500 psi | ASTM-D638 |
Braskem HB0454 HDPE Blow Molding Polyethylene Copolymer HB0454 is a high-density polyethylene copolymer resin with average molecular weight produced by the Unipol® process. A bottle made with HB0454 shows excellent processability, color, and superficial.. |