Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 35.0 MPa | 5080 psi | |
Plastcom SLOVALEN PC 51 GF 10 PP, 10% glass fibre FeaturesModified copolymer PP for injection moulding, chemically reinforced with 10% glass fibre, with high strength, rigidity and toughness, adapted thermal properties, decreased shrinkage. Suitabl.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics Cycolac® HMG94MD ABS Superior flow, injection molding ABS for medical applications. Good impact. For thin-wall applications. Biocompatible (ISO10993). FDA compliant. Gamma & EtO sterilizable. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics Cycolac® MG94 ABS (Europe-Africa-Middle East) Superior flow, injection molding ABS. Good impact. For thin-wall applications. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Cycolac® S705 ABS (Europe-Africa-Middle East) CYCOLAC S705 is a new generation ABS plating grade, offering semi high heat with a good property balance for impact and flow. CYCOLAC S705 demonstrates excellent electroplatability and a good therma.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | Type I, 50 mm/min; ASTM D 638 |
SABIC Innovative Plastics Geloy XTWM200 ASA (Asia Pacific) ASA resin for injection molding. Excellent flow, colorability and outdoor weathering capability.This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP COLORCOMP A1000H ABS LNP* COLORCOMP* A1000H is an unfilled compound based on ABS. Added feature of this grade is: Healthcare. |
|||
Tensile Strength at Break | 35.0 - 50.0 MPa @Thickness 2.00 mm, Temperature 23.0 °C |
5080 - 7250 psi @Thickness 0.0787 in, Temperature 73.4 °F |
Type IV, 50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 1015 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 1015 PVDF homopolymer has very high viscosity, suitable for membrane manufacturing. It is available exclusively as powder.Information provided by Solvay Specialty Polymers. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | ISO R 527 |
Fainplast Compounds RK 317/UV Rigid PVC, Extrusion Lead Free Profiles anti-UV |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | ISO R 527 |
Fainplast Compounds RK 335/1 Rigid PVC, Extrusion Lead Free Profiles |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | Injection molded parts; DIN 53504 |
Huntsman IROGRAN® A 85 E 4719 TPU-Polyester Introduction: IROGRAN A 85 E 4719 is a thermoplastic polyester polyurethane for melt calendering. IROGRAN is part of the HUNTSMAN technical extrusion and injection molding product range and offers a.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | MD |
JPJ Technologies LLD150-2 LLDPE Virgin Application: Used for ice & frozen bags, garbage bags consumer packingInformation provided by JPJ Technologies |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | |
LATI Laticonther 87/28 GR/50 PC, 50% Graphite Reinforced High thermal conductivity product based on Polycarbonate (PC). Graphite.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria T.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | |
LATI Latigray 82-04 CX/90 PA 12 Radiopaque compound based on Polyamide 12 (PA12). Special mineral filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL RN0401 PPE+PS (Asia Pacific) RN0401 is an unfilled Post Consumer Recycle (PCR) based injection moldable modified polyphenylene ether resin comprising at least 20% PCR styrenic series resin content. Available in black only. |
|||
Tensile Strength at Break | 35.0 - 50.0 MPa @Thickness 2.00 mm |
5080 - 7250 psi @Thickness 0.0787 in |
50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 1015 Polyvinylidene Fluoride (PVDF) Solef® 1015 PVDF homopolymer has very high viscosity, suitable for membrane manufacturing. It is available exclusively as powder.Features: Homopolymer; Ultra High ViscosityUses: MembranesAddition.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Xenoy® CL500U PBT+PC (Europe-Africa-Middle East) XENOY CL500U is a semi-crystalline blend, developed for exterior automotive parts ( except bumper shells ) and non automotive parts, requiring good impact, excellent chemical resistance and UV stabi.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics Xenoy® HX6600HP PBT+PC (Asia Pacific) Xenoy HX6600HP is PBT based semi-crystalline blend with balanced flow and impact properties. Improved chemical resistance against lab disinfectants and chemicals for healthcare enclosure and housing.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL PX1005X PPE+HIPS (Europe-Africa-Middle East) Noryl PX1005X is an unfilled, low heat resistance, halogen free (according VDE/DIN 472 part 813) flame retardant material. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP THERMOCOMP MC002 PP LNP* THERMOCOMP* MC002 is a compound based on Polypropylene resin containing 10% Carbon Fiber. Added feature of this material is: Electrically Conductive. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | Crosshead speed 100 mm/min; ISO 527 |
SCG Chemicals EL-Leneâ„¢ H5211PBL High Density Polyethylene Pipe Resin Key Characteristics: Good processing, high thermal stability, good resistance to weatheringRecommended Applications: Stripe lines for PE80 pipe, non pressure pipesCertification: Certified by LNEI.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | ASTM D 638 |
Cossa Polimeri ESTALUX 9202 Methyl Methacrylate Acrylonitrile Butadiene Styrene Plastic blend that combines impact properties of ABS with the excellent transparency of PMMABiomedical grade in line with US pharmacopeia class VI USP and European pharmacopeia cap. 3.2.2Information.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | 50 mm/min; ISO 527 |
Chi Mei Polylac® PA-716 ABS - High Flow High flow, medium impact |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | ISO 527-1/-2 |
DuPont Performance Polymers Hytrel® DYM350BK TPC-ET+PBT
(Unverified Data**) Medium Modulus Polyester Elastomer with Excellent Impact Resistance Developed for Air Bag Door ApplicationsInformation provided by DuPont Performance Polymers |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | conditioned; ISO 527-1/-2 |
EMS-Grivory Grivory® L 25 W 20 X PA12-I Product Description: Grilamid L 25 W 20 X is a semi-flexible plasticized high viscosity extrusion grade of Polyamide 12 (PA12). Grilamid L 25 W 20 X is impact modified and UV and heat stabilized. Th.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | Conditioned 15 days at 23°C - 50% RH; ASTM D638 |
Arkema Group Pebax® MV 3000 SP 01 Polyether Block Amide (PEBA) Polyether block amide PEBAX® MV 3000 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This hydrophilic grade when extruded into either a thin film or laminated on .. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | ASTM-D638 |
Braskem GF4950HS HDPE Blow Molding Polyethylene Copolymer GF4950HS resin is a high-density polyethylene (HDPE), bimodal copolymer offering a combination of good processability and environmental stress crack resistance (ESCR). It is thus recommended for the.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | ASTM D638 |
Aclo Accutech Polypropylene Copolymer CP0437G20M10CL Glass/Mineral Reinforced Coupled |
|||
Tensile Strength at Break | 35.0 MPa @Temperature 80.0 °C |
5080 psi @Temperature 176 °F |
ISO Data |
BASF Ultramid® 8202C HS PA6 (Dry) Ultramid 8202C HS is a heat stabilized, low viscosity, PA6 injection molding homopolymer possessing a modified crystalline structure for increased property performance and faster cycles. It is also.. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | ISO 527-1 |
Barlog Plastics KEBAFLEX P D55.1 Polyester-Elastomer, Shore D55 TPC-ETInformation provided by BARLOG plastics GmbH. |
|||
Tensile Strength at Break | 35.0 MPa | 5080 psi | |
LATI Latigray 82-05 CX/90 PA 12 Radiopaque compound based on Polyamide 12 (PA12). Special mineral filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria.. |