Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 22.8 MPa | 3300 psi | 2 in/min; ASTM D638 |
RheTech Products CC20P200-00 20% Calcium Carbonate Reinforced Polypropylene Copolymer, Natural Applications: Electrical housingsDurable goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | 2 in/min; ASTM D638 |
RheTech Products E204-01 High Density Polyethylene, Black Applications: Electrical housingsUnderhood componentsConsumer GoodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | 2 in/min; ASTM D638 |
RheTech Products HP519-00 26% Talc Reinforced High Performance Polypropylene Copolymer, Non-UV Stabilized, Natural Applications: Interior trim moldingsSill platesAir ductsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | 2 in/min; ASTM D638 |
RheTech Products HP519-01 26% Talc Reinforced High Performance Polypropylene Copolymer, UV Stabilized, Black Applications: Interior trim moldingsSill platesAir ductsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | 2 in/min; ASTM D638 |
RheTech Products HP520-01 12% Talc Reinforced High Performance Polypropylene Copolymer, Non-UV Stabilized, Black Applications: Interior trimCenter consolesGlove box binsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | 2 in/min; ASTM D638 |
RheTech Products P252-670UV Polypropylene Copolymer, UV Stabilized, 134B Stone Applications: Interior trimElectrical housingsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | 2 in/min; ASTM D638 |
RheTech Products P252-674UV Polypropylene Copolymer, UV Stabilized, 447B Fawn Applications: Interior trimElectrical housingsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | chs 2 in/min; ASTM D638 |
Network Polymers SBS 1000 Clear Styrene Butadiene Copolymer Description: Clear Styrene Butadiene CopolymerInformation provided by Network Polymers Inc. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | ASTM D412 |
ITW Devcon Rubber Repair / Castable Urethane High Temp Edge & Seal (T-36), Amber Information provided by ITW Devcon |
|||
Tensile Strength at Break | 22.8 - 25.5 MPa | 3300 - 3700 psi | |
ITW Plexus Plexusâ„¢ MA820 Methacrylate Adhesive Two-part adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies.Excellent for structural bonding of surface metals with no surface preparation.Information provide.. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | ASTM D412 |
ITW Devcon Rubber Repair / Castable Urethane Edge & Seal (T-35), Black Information provided by ITW Devcon |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | ASTM D412 |
Teknor Apex APEX® 2090-H Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Good FlexibilityUses-General Purpose, ProfilesAppearance-ClearForms-PelletsProcessing Method-Extrusi.. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | ASTM D412 |
Teknor Apex APEX® 2595-H Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Good FlexibilityUses-General Purpose, ProfilesAppearance-Natural Color, OpaqueForms-PelletsProcessin.. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | ASTM D638 |
Teknor Apex APEX® 3601-90 Polyvinyl Chloride, Flexible Uses: Medical/Healthcare Applications Agency Ratings: NSF 61 Forms: Pellets Additional Information: Second Generation SeriesInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | ASTM D412 |
Teknor Apex Telcar® TL-94-T0586C-113 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | vs. polycarbonate; 30 s set time |
Elmer's Products Aron Alpha® 802 Cyanoacrylate Adhesive (Industrial Krazy Glue™) Low odor, low chlorosis (bloom) when a transparent bond, appearance and strength are required.Medium gap fill. Ethoxyethyl monomer. Excellent on rubber/plastic substrates. Fair on metal substrate.. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | Molded and tested in accordance with ASTM D4976; ASTM D638 |
Dow DMDA-8907 NT 7 High Density Polyethylene Resin DOW DMDA-8904 NT 7 is produced using UNIPOL™ process technology. It is intended for use in injection molding applications such as pails, industrial parts and other shipping containers. Information.. |
|||
Tensile Strength at Break | 22.75 MPa | 3300 psi | ASTM D1414, ASTM D412 |
DuPont Performance Polymers Kalrez® Spectrum™ 7090 Fluoroelastomer DuPont™ Kalrez Spectrum™ 7090 perfluoroelastomer parts are specifically targeted for use in applications requiring high hardness/higher modulus properties. These specialty black parts have excelle.. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | ASTM D638 |
Amco Amalloy® B1017A Clear Multipolymer Alloy Amco Amalloy B1017A is a high impact multipolymer with exceptional clarity, good tensile and flexural strength, and medium-high melt flow.Super high impact, medium melt flow, good tensile and flexur.. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | ASTM D638 |
Teknor Apex APEX® 80851-B Polyvinyl Chloride, Flexible Notes: 105°C Insulation; RoHS Compliant Forms: Pellets Uses: Wire and Cable Applications Wire Types: THW; TW; THHN; THWN Agency Ratings: UL QMTT2 .E73402Information Provided by Teknor Apex |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | 2 in/min; ASTM D638 |
RheTech Products CC20P200-01 20% Calcium Carbonate Reinforced Polypropylene Copolymer, Black Applications: Electrical housingsDurable goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | 2 in/min; ASTM D638 |
RheTech Products CC40P100-01 40% Calcium Carbonate Reinforced Polypropylene, Black Applications: Consumer goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.8 MPa | 3300 psi | 2 in/min; ASTM D638 |
RheTech Products E204-00 High Density Polyethylene, Natural Applications: Electrical housingsUnderhood componentsConsumer GoodsInjection molding conditions reported in table.Information provided by RheTech Products. |