Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 19.6 MPa @Thickness 2.00 mm |
2840 psi @Thickness 0.0787 in |
50mm/min; ASTM D638 |
LG Chemical KEYFLEX BT 10288D Ester Type TPE Description: Injection Molding, TPC-ET, General Purpose, Low ModulusApplication: Automotive Interior, Soft Touch GripsCAS: 37282-12-5Information provided by LG Chemical |
|||
Tensile Strength at Break | >= 19.6 MPa | >= 2840 psi | |
Sibur 140-13A Compound 8/2 Polyvinyl Chloride (PVC) Shall correspond to control sample, approved in accordance with the established procedure. Pores, which can be seen by eyes, are not allowed. Plastic shall no burn at stop of worm extruder for a p.. |
|||
Tensile Strength at Break | >= 19.6 MPa | >= 2840 psi | |
Sibur 140-13P Polyvinyl Chloride (PVC) Shall correspond to control sample, approved in accordance with the established procedure. Pores, which can be seen by eyes, are not allowed. Plastic shall no burn at stop of worm extruder for a p.. |
|||
Tensile Strength at Break | >= 19.6 MPa | >= 2840 psi | |
Sibur SKN-26PVC-30 Nitrile-Butadiene Rubber (NBR) For production of rubber and asbestos technical articles which are used as sets for automobile, air planes, different machines and equipment, agricultural, drilling, and polygraph machinery, as well.. |
|||
Tensile Strength at Break | >= 19.6 MPa | >= 2840 psi | |
Sibur SKN-33PVC-30 Nitrile-Butadiene Rubber (NBR) For production of rubber and asbestos technical articles which are used as sets for automobile, air planes, different machines and equipment, agricultural, drilling, and polygraph machinery, as well.. |
|||
Tensile Strength at Break | 19.6 MPa | 2840 psi | 5 mm/min; ASTM D638 |
Samsung Cheil Industries Infino® HP-0500 ABS, Unreinforced Heat Resistant ABS material that can mainly be used for the exterior material of household appliances etc.Information provided by Samsung Cheil Industries. |
|||
Tensile Strength at Break | 19.6 MPa | 2840 psi | 5 mm/min; ASTM D638 |
Samsung Cheil Industries Infino® HP-0500 ABS, Unreinforced Heat Resistant ABS material that can mainly be used for the exterior material of household appliances etc.Information provided by Samsung Cheil Industries. |
|||
Tensile Strength at Break | >= 19.6 MPa | >= 2840 psi | |
Sibur DST-30-01 1st Group Styrene-Butadiene-Styrene Block Copolymer (SBS-TPE) Kraton D 1101, 1102. For modification of bitumen, intended for road coverings, modification of plastics, and for production of glues, strip hermetic, and protective coatings. |
|||
Tensile Strength at Break | >= 19.6 MPa | >= 2840 psi | |
Sibur DST-30-01 2nd Group Styrene-Butadiene-Styrene Block Copolymer (SBS-TPE) Kraton D 1101, 1102. For modification of bitumen, intended for road coverings, modification of plastics, and for production of glues, strip hermetic, and protective coatings. |
|||
Tensile Strength at Break | 19.6 MPa | 2840 psi | 50 mm/min; ASTM D638 |
Supreme Petrochem SH 2157 High Impact Polystyrene Characteristics Excellent ESCR properties Good formability Processing ExtrusionApplications Refrigerator door and cabinet liners Dairy containers Ice cream cups, plates and bowlsMaterial Status: .. |
|||
Tensile Strength at Break | 19.6 MPa | 2840 psi | ASTM D638 |
Asahi Glass AFLAS® SZ TFE/P/VdF Fluoroelastomer AFLAS® SZ/SP are terpolymers containing tetrafluoroethylene, propylene, and a small amount of vinylidene fluoride used as a cure site monomer. This combination gives AFLAS® SZ/SP a good balance of.. |
|||
Tensile Strength at Break | 19.6 MPa @Thickness 2.00 mm |
2840 psi @Thickness 0.0787 in |
50mm/min; ASTM D638 |
LG Chemical KEYFLEX BT 1035D Ester Type TPE Description: Injection Molding, TPC-ET, General Purpose, Low ModulusApplication: Automotive Interior, Soft Touch GripsCAS: 37282-12-5Information provided by LG Chemical |