Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 11.9 MPa | 1730 psi | ASTM D412 |
Multibase TPSiV™ 3040-85A Thermoplastic Silicone Vulcanizate These materials are a novel family of TPV products based on cross-linked silicone rubber dispersed into various engineering thermoplastics. The dispersion of the silicone internal phase is produced.. |
|||
Tensile Strength at Break | 11.9 MPa | 1730 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Elastamax™ HTE 3050 Polyvinyl Chloride + NBR (PVC+NBR) Elastamax™ HTE Series thermoplastic elastomers (TPEs) are based upon compounded blends of PVC resins and nitrile rubber. These elastomeric materials provide outstanding resistance to hydrocarbons a.. |
|||
Tensile Strength at Break | 11.9 MPa | 1730 psi | Across Flow; ASTM D412 |
ExxonMobil Santoprene® 8201-80HT Thermoplastic Elastomer A soft, colorable, non-hygroscopic thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material offers enhanced tensile, tear and abrasion properties along with improve.. |
|||
Tensile Strength at Break | 11.9 MPa | 1730 psi | Press cure 15 Minutes @ 188°C, Post Cure 24 Hours @ 250°C |
3M Dyneon™ 81TZ High Temperature Perfluoroelastomer 3M™ Dyneon™ PFE 81TZ is a technically advanced high temperature perfluoroelastomer (HT PFE). It is designed to meet the challenges of higher temperature applications. It is classified as FFKM per .. |
|||
Tensile Strength at Break | 11.9 MPa | 1730 psi | Press Cure 10 Minutes @ 177°C |
3M Dyneon™ LTFE 6400Z Low Temperature Fluoroelastomer 3M™ Dyneon™ Low Temperature Fluoroelastomers LTFE 6400Z are technically advanced low temperature, peroxide-cured fluoroelastomers, designated as a FKM type 3 elastomer per ASTM D1418. They are des.. |
|||
Tensile Strength at Break | 11.9 MPa | 1730 psi | Press Cure 10 Minutes @ 177°C |
3M Dyneon™ LTFE 6400ZC Low Temperature Fluoroelastomer 3M™ Dyneon™ Low Temperature Fluoroelastomers LTFE 6400ZC are technically advanced low temperature, peroxide-cured fluoroelastomers, designated as a FKM type 3 elastomer per ASTM D1418. They are de.. |