Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 17.6 MPa | 2550 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible 90253 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible XV3805 Polyvinyl Chloride, Flexible (PVC, Flexible) All ingredients used in the formulation of this compound are listed in the United States FDA Code of Federal Regulations, Title 21. The only restriction is that the plasticizer is For foods of high .. |
|||
Tensile Strength at Break | 17.6 MPa @Temperature 200 °C, Time 605000 sec |
2550 psi @Temperature 392 °F, Time 168 hour |
After Dry Heat Aging; ASTM D865 |
Seals Eastern 7130 Fluorocarbon-Elastomer FKM specially for oil & gas service.Information provided by Seals Eastern, Inc. |
|||
Tensile Strength at Break | >= 17.6 MPa | >= 2550 psi | |
Sibur 140-13 Compound 230/1 Polyvinyl Chloride (PVC) Shall correspond to control sample, approved in accordance with the established procedure. Pores, which can be seen by eyes, are not allowed. Plastic shall no burn at stop of worm extruder for a p.. |
|||
Tensile Strength at Break | >= 17.6 MPa | >= 2550 psi | |
Sibur DST-30R-01 1st Group Styrene-Butadiene-Styrene Block Copolymer (SBS-TPE) Kraton D 1184, 1186. As modifiers for bitumen for production of roofing materials, footwear compositions, adhesives, and coverings, as well as for modification of plastics. Addition of thermal ela.. |
|||
Tensile Strength at Break | >= 17.6 MPa | >= 2550 psi | |
Sibur DST-30R-01 2nd Group Styrene-Butadiene-Styrene Block Copolymer (SBS-TPE) Kraton D 1184, 1186. As modifiers for bitumen for production of roofing materials, footwear compositions, adhesives, and coverings, as well as for modification of plastics. Addition of thermal ela.. |
|||
Tensile Strength at Break | >= 17.6 MPa | >= 2550 psi | |
Sibur SKN-18SME Nitrile-Butadiene Rubber (NBR) For production of rubber and asbestos technical articles which are used as sets for automobile, air planes, different machines and equipment, agricultural, drilling, and polygraph machinery, as well.. |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | ASTM D638 |
Teknor Apex APEX® 3601-75 Polyvinyl Chloride, Flexible Uses: Medical/Healthcare Applications Agency Ratings: NSF 61 Forms: Pellets Additional Information: Second Generation SeriesInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 17.6 MPa @Treatment Temp. 145 °C, Time 2100 sec |
2550 psi @Treatment Temp. 293 °F, Time 0.583 hour |
Cure; ASTM D412 |
Styron Buna® cis 132 Schkopau High-cis Polybutadiene Rubber (PBR) Composition: Buna® cis 132 – Schkopau is a stereospecific polybutadiene with a high 1,4-cis content. It is manufactured by a solution process using an organo-metallic nickel catalyst which p.. |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | ASTM D638 |
Teknor Apex APEX® 82-E254X-NL Polyvinyl Chloride, Flexible Notes: 105°C Jacket; RoHS Compliant Uses: Wire and Cable ApplicationsForms: PelletsInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | ASTM D638 |
Teknor Apex APEX® 84128 Polyvinyl Chloride, Flexible Notes: 80°C Insulation; RoHS Compliant Uses: Wire and Cable Applications Forms: PelletsInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | ASTM D638 |
Teknor Apex Fireguard® 910-NL1 Polyvinyl Chloride, Flexible Notes: RoHS Compliant Features: Flame Retardant; Low Smoke Emission Uses: Plenum Cable Jacketing Wire Types: CL2P; CL3P; CMP; FPLP; MPP; OFNP Agency Ratings: NEC Article 725; NEC Article 760; NEC Ar.. |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | ASTM D638 |
Teknor Apex APEX® 4020 Polyvinyl Chloride, Flexible Notes: 60°C General Purpose; RoHS Compliant Uses: Connectors; Grommets; Plugs; Strain ReliefsForms: Pellets Processing Method: Injection Molding Agency Ratings: UL QMFZ2 .E54709 Wire Types: Molde.. |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | ASTM D412 |
Teknor Apex Telcar® TL-102 BLK 111 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Automotive Speci.. |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | ASTM D638 |
Toyobo PELPRENE™ P50DFR Polyester TPE, Flame Resistant Features: Polyester TPE, Flame ResistantInformation provided by Toyobo. |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | Across Flow; ASTM D412 |
ExxonMobil Santoprene® 201-87 Thermoplastic Elastomer A hard, colorable, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide ra.. |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | Across Flow; ASTM D412 |
ExxonMobil Santoprene® 271-87 Thermoplastic Elastomer A hard, colorable, specialty thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. It complies with FDA regulations for rubber articles intended for repeated use, as well as t.. |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | ASTM D638 |
Teknor Apex APEX® 80118-Y Polyvinyl Chloride, Flexible Notes: 60°C Insulation; RoHS Compliant Features: Good UV Resistance Uses: Cable Jacketing; InsulationAgency Ratings: UL 1063; UL 1581; UL 62; UL 83 Forms: Pellets Wire Types: TWInformation Provided.. |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | ASTM D638 |
Teknor Apex APEX® 84131 Polyvinyl Chloride, Flexible Notes: 105°C Jacket; RoHS Compliant Uses: Transportation Wire JacketingAgency Ratings: UL 62; UL QMTT2 .E73402 Forms: Pellets Wire Types: SAE; SJTW; SPT-1; SPT-2; SPT-3; SRDT; STW; SVTInformation P.. |
|||
Tensile Strength at Break | 17.6 MPa | 2550 psi | Across Flow; ASTM D412 |
ExxonMobil Santoprene® 101-87 Thermoplastic Elastomer A hard, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide range .. |