Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 17.5 MPa | 2540 psi | ISO R 527 |
Stir SpA AF 95 HT 105 CZ (PVC) Application: Extrusion insulation CEI 20-11 type TI3 and YI8Information provided by STIR SpA |
|||
Tensile Strength at Break | 17.5 MPa | 2540 psi | ASTM D412 |
UBE UBEPOL BR153A Oil-Extended BR Synthetic Rubber Vulcanizate (Cured 35 Minutes at 145°C) Description: UBEPOL BR is UBE's line of polybutadiene rubber products.Information provided by UBE. |
|||
Tensile Strength at Break | 17.5 MPa | 2540 psi | ASTM D412 |
Teknor Apex Telcar® TL-90-T707E-100 BLK 111 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
Tensile Strength at Break | 17.5 MPa | 2540 psi | ISO 527-1/-2 |
DSM Arnitel® PL420-H Injection Molding Grade Copolyester Elastomer (North America) Product description: Arnitel® combines the advantages of engineering thermoplastics, being easy to process with excellent mechanical properties, at the same time with the flexibility of rubbers.Arn.. |
|||
Tensile Strength at Break | 17.5 MPa | 2540 psi | ISO 527-1/-2 |
DSM Arnitel® PL420-H Polyether Ester Elastomer (European and Asian Grade) Product description: Arnitel® combines the advantages of engineering thermoplastics, being easy to process with excellent mechanical properties, at the same time with the flexibility of rubbers.Arn.. |
|||
Tensile Strength at Break | 17.5 MPa | 2540 psi | ISO 527-2/50 |
ExxonMobil Exxtral™ CMV 205 Performance Polyolefin Product Description: A specialty thermoplastic polyolefin resin characterized by high stiffness and designed for automotive interior applications in which good surface finish and good UV resistance .. |
|||
Tensile Strength at Break | 17.5 MPa | 2540 psi | ASTM D412 |
DuPont Performance Polymers Kalrez® 9500 Fluoroelastomer DuPont™ Kalrez® 9500 perfluoroelastomer parts are a tan product for Deposition, Ash/Strip and Conductor (Poly/Metal) Etch processes. It has been specifically designed for use in applications where.. |
|||
Tensile Strength at Break | 17.5 MPa | 2540 psi | ASTM D3759 |
3M Scotch® 218 Fine Line Tape Scotch® Fine Line Tape 218 is a high-performance film backed tape with low profile and high adhesion to achieve excellent paint liens and for other masking and holding applications.Information prov.. |
|||
Tensile Strength at Break | 17.5 MPa | 2540 psi | Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FC 2144 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FC 2144 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formul.. |
|||
Tensile Strength at Break | 17.5 MPa | 2540 psi | ASTM D3759 |
3M Scotch® 862 Reinforced Strapping Tape Scotch® Strapping Tape is reinforced with continuous polypropylene monofilaments. The polypropylene backing provides excellent abrasion, moisture and scuff resistance. The adhesive is specifically .. |