Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 11.5 MPa | 1670 psi | IEC 60811 |
Solvay Specialty Polymers Cogegum® GFR/365 Polyolefin, Unspecified
(Unverified Data**) Cogegum® XLPO-HFFR - Crosslinkable Halogen Free Fire Retardant compound Silane grafted compound moisture curable by addition of a catalyst masterbatch (Sioplas® method). It consists of a polyolefi.. |
|||
Tensile Strength at Break | 11.5 MPa | 1670 psi | 200mm/min; ASTM D638 |
LG Chemical LUTENE LB7500 LDPE Extrusion Coating Description: LUTENE LB7500 is mainly intended for extrusion coating and can be processed at high speed uniform thickness and width. LUTENE LB7500 is also noted for the excellent adhesion to porous a.. |
|||
Tensile Strength at Break | 11.5 MPa | 1670 psi | ASTM D638 |
Solvay Specialty Polymers Cogegum® GFR/365 Polyolefin Cogegum® XLPO-HFFR - Crosslinkable Halogen Free Fire Retardant compound. Silane grafted compound moisture curable by addition of a catalyst masterbatch (Sioplas® method). It consists of a pol.. |
|||
Tensile Strength at Break | >= 11.5 MPa | >= 1670 psi | |
Shandong Dongyue Shenzhou New Material Co DS2603 Fluoroelastomer Copolymer Gum Conformable with: Q/DYS 005-2007Brief Introduction:FKM-DS2600 is copolymer of HFP and VDF. Normally it is white or light yellow translucent elastomer whose fluorine content is over 66%. After vulc.. |
|||
Tensile Strength at Break | >= 11.5 MPa | >= 1670 psi | |
Shandong Dongyue Shenzhou New Material Co DS2604 Fluoroelastomer Copolymer Gum Conformable with: Q/DYS 005-2007Brief Introduction:FKM-DS2600 is copolymer of HFP and VDF. Normally it is white or light yellow translucent elastomer whose fluorine content is over 66%. After vulc.. |
|||
Tensile Strength at Break | 11.5 MPa | 1670 psi | ASTM D638 |
Teknor Apex APEX® 3700-65 Polyvinyl Chloride, Flexible Features: DEHP Plasticizer; Ethylene Oxide Sterilizable; High Heat Resistance Uses: Medical/Healthcare Applications Processing Method: Extrusion Forms: PelletsInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 11.5 MPa | 1670 psi | ISO 527-2 |
Carmel Olefins IPETHENE® 830 Low Density Polyethylene IPETHENE® 830 is a low density polyethylene injection molding grade. It exhibits high melt flow rate and high stiffness. APPLICATIONS IPETHENE® 830 is used to produce lids, containers, toys, and.. |