Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 11.0 MPa | 1600 psi | TM R050-36 |
Resinlab® EP1112NC Clear Electronic Grade Epoxy Encapsulant Resinlab™ EP1112NC Clear is a two part unfilled fast curing electronic grade epoxy encapsulant designed for small to medium sized castings. EP1112NC Clear is a modified version of the standard EP11.. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ASTM D412 |
Multibase TPSiV™ 3011-50A Thermoplastic Silicone Vulcanizate These materials are a novel family of TPV products based on cross-linked silicone rubber dispersed into various engineering thermoplastics. The dispersion of the silicone internal phase is produced.. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ASTM D412 |
Multibase TPSiV™ 3040-65A Thermoplastic Silicone Vulcanizate These materials are a novel family of TPV products based on cross-linked silicone rubber dispersed into various engineering thermoplastics. The dispersion of the silicone internal phase is produced.. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | TM R050-36 |
Resinlab® EP1290 Clear Mineral Filled Epoxy Adhesive Resinlab™ EP1290 Clear is a two part mineral filled epoxy adhesive designed for bonding metals and plastics. It cures at room temperature to a tough, semi-flexible material. It has good wetting to .. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ISO 527 |
Polimeri Europa Riblene® GP 26 Low Density Polyethylene - Coating Grade Riblene GP 26 is a high fluidity low density polyethylene resin (LDPE).Main Applications: Riblene GP 26 is suitable for coating applications where low neck-in and high draw-down are key factors. F.. |
|||
Tensile Strength at Break | 11.0 MPa @Temperature 23.0 °C |
1600 psi @Temperature 73.4 °F |
Die C2 hr; ASTM D412 |
PolyOne Dynaflex™ G7690-1 (Natural) Thermoplastic Elastomer (TPE) Dynaflex™ G7690-1 (Natural) is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Overmold Adhesion to Polyprop.. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ASTM D638 |
LyondellBasell Microthene® G MN71120 Low Density Polyethylene (Rotomolding) General DescriptionMicrothene G polyolefin powders are ground, irregularly-shaped particles designed for use in a broad range of specialty applications. Microthene G powders combine the unique prop.. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | |
Shin-Etsu Silicones FE-401U Fluorosilicone Elastomer ShinEtsu FE401 U is a fluorosilicone/silicone blend. It is designed to process well in molding applications.Product Features: Good fuel and oil resistance.Information Provided by Shin-Etsu Silicones.. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ASTM D412 |
Teknor Apex Telcar® TL-87-L832-B Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P.. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | 500 mm/min; ASTM D638 - ISO 527-2 |
DuPont Elvaloy® 1820 AC Ethylene and 20% Methyl Acrylate Copolymer Elvaloy® 1820 AC is intended for film coextrusion, compounding and injection molding. Due to its high melt flow rate, it also can be used in extrusion coating/lamination. Elvaloy® 1820 AC has go.. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | 500mm/min; ASTM D638 Type IV Specimen |
Westlake EM1550AA Low Density Polyethylene WESTLAKE low-density polyethylene EM1550 is a low-density formulation used for injection molding applications.Application/UsesFlexible medicalLidsMedicalFDA: This material complies with FDA regulati.. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ASTM D638 |
Teknor Apex Vidux® 100-1A Polyvinyl Chloride, Flexible Forms: PelletsInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ASTM D638 |
ELASTO UK Dryflex® 502800S SEBS Based Material, Unfilled Qualities, 80A Hardness, Black The 500-seriesis very favorable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mecha.. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | Across Flow; ASTM D412 |
ExxonMobil Santoprene® 241-80W236 Thermoplastic Elastomer A soft, colorable, specialty thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. It complies with NSF 61 for plumbing applications in contact with potable water and contains.. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ASTM D882 |
Diamond Polymers NPP10-2523 Low Density Polyethylene Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Tensile Strength at Break | >= 11.0 MPa | >= 1600 psi | ISO R 527 |
Fainplast Compounds GA 70 Flexible PVC, Flame Retardant Sheathing General purposes |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ISO R 527 |
Fainplast Compounds GS 650 Flexible PVC, Injection Molding for Footwear Anti-slip soles |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ISO R 527 |
Fainplast Compounds GS 7005 Flexible PVC, Injection Molding for Technical Items Technical items |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | IEC 60811 |
Fainplast Compounds HAX HF 039/4H Halogen Free PVC Sheathing, insulation; high flexibility |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ASTM D638 |
Aclo Accucomp Polyethylene HD0205L High Density |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0339C10L1 Calcium Reinforced |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | ASTM D638 |
Aclo Accutech Polyethylene HD0234G10UVL High Density Glass Reinforced UV Stabilized |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | Across Flow; ASTM D412 |
ExxonMobil Santoprene® 121-80M300 Thermoplastic Elastomer
(discontinued **) A soft, black, UV resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material is designed for automotive interior applications requiring low fogging and good.. |
|||
Tensile Strength at Break | 11.0 MPa | 1600 psi | Across flow; ASTM D412 |
ExxonMobil Santoprene® 8291-80TB Thermoplastic Rubber
(discontinued **) Description: A colorable thermoplastic elastomer which bonds to adhesive/epoxy spin-finished polyester or standard nylon fibers for closed-braid hose and woven-substrate products. With bonds strong.. |