Polymer Property : Tensile Strength at Break = 16.5 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	16.5 MPa	2400 psi	2 in/min; ASTM D638
RheTech Products FT2500-01A Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: Air DamsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	16.5 MPa	2400 psi	2 in/min; ASTM D638
RheTech Products FT2500-630UV Thermoplastic Polyolefin, UV Stabilized, 500F Light Charcoal Applications: Air DamsHitch padsScuff padsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	16.5 MPa	2400 psi	2 in/min; ASTM D638
RheTech Products FT3150-01 Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: Air deflectorsUnderhood componentsBumper componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	16.5 MPa	2400 psi	2 in/min; ASTM D638
RheTech Products UVFT2500-01 Thermoplastic Polyolefin, 90K Flexural Modulus, UV Stabilized, Black Applications: Air damsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Tensile Strength at Break	16.5 MPa	2390 psi	Type IV, 510 mm/min; ASTM D638
PolyOne FireCon™ CPE 1240 UV RoHS NATURAL Polyethylene, Chlorinated (CPE) An excellent choice for low-voltage power-and-cable control cables, this RoHS compliant filled, flexible thermoplastic CPE jacketing compound offers wire and cable manufacturers the advantages of th..
Tensile Strength at Break	16.5 MPa	2390 psi	510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible A8501 Polyvinyl Chloride, Flexible (PVC, Flexible) Recommended for interior applications.Information provided by PolyOne
Tensile Strength at Break	16.5 MPa	2390 psi	510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible A85UB Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne
Tensile Strength at Break	16.5 MPa	2390 psi	510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible 86479 Natural Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne
Tensile Strength at Break	16.5 MPa	2390 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible R323AE Polyvinyl Chloride Elastomer (PVC Elastomer) Information provided by PolyOne
Tensile Strength at Break	16.5 MPa	2390 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Flexible R328BE Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D4894
3M Dyneon™ CC646/S Custom Compound (discontinued **) This compound consists of a mixture of 60% bronze blended with PTFE.Information provided by Dyneon, A 3M Company
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D638
LyondellBasell PetrotheneÂ® PR92735 Linear Low Density Polyethylene ApplicationsPETROTHENE PR 92735 is a high molecular weight, linear low density-based compound designed for cable jacketing. PR 92735 contains a nominal carbon black content of 2.6% and antioxidant ..
Tensile Strength at Break	16.5 MPa	2400 psi	100% retained after aging 7 days at 165Â°C.; ASTM D638
LyondellBasell PetrotheneÂ® YR19548 Polyolefin Compound ApplicationsPETROTHENE YR 19548 is a colorable, thermoplastic non-halogenated, flame retardant polyolefin compound formulated for small gauge automotive primary insulation (SAE J1128) and appliance ..
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D412
ITW Devcon FlexaneÂ® Rubber Repair / Castable Urethane Fast Cure, Black Information provided by ITW Devcon
Tensile Strength at Break	16.5 MPa	2400 psi	AVG; ASTM D412 Method A
Seals Eastern 7265D Fluorocarbon-Elastomer Formulated Viton-ETPÂ®. High temperature service in aggressive chemicals; Good base resistance.Information provided by Seals Eastern, Inc.
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D638
Teknor Apex APEXÂ® 3600-75NT Polyvinyl Chloride, Flexible Uses: Medical/Healthcare Applications Agency Ratings: NSF 61 Forms: Pellets Additional Information: First Generation SeriesInformation Provided by Teknor Apex
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D412
Teknor Apex MF 573 Polyvinyl Chloride, Flexible Film Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Film, Medical Applications Forms-PelletsInformation provided by Teknor Apex Company
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D638
Teknor Apex APEXÂ® 80328-Y Polyvinyl Chloride, Flexible Notes: 75Â°C Insulation; RoHS Compliant Features: Sunlight Resistant (720 hours) Uses: Cable Jacketing; InsulationAgency Ratings: UL QMTT2 .E73402 Forms: Pellets Wire Types: TWInformation Provided..
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D412
Teknor Apex Telcar® TL EF-6133L2 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P..
Tensile Strength at Break	16.5 MPa	2400 psi	ASTM D412
Teknor Apex Uniprene® UN-2467A Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Expansion Joint; Grommets; Tubing; Gaskets; Plugs; Weatherstripping; Glazing; Shock Absorbing Pads Forms: Pellets Processing Method: Extrusion; Injection Molding Ex..
Tensile Strength at Break	16.5 MPa	2400 psi	Molded and tested in accordance with ASTM D4976; ASTM D638
Dow FLEXOMER™ GRSN-1539 NT 7 Very Low Density Polyethylene (VLDPE) Resin FLEXOMER™ GRSN-1539 NT 7 is an ethylene-butene copolymer produced via gas phase polymerization from Dow. It can be utilized in monolayer and co-extruded films and in blends with other polyolefins ..
Tensile Strength at Break	16.5 MPa	2390 psi	ISO 37
Alliance Polymers Viprene™ P55D-22U-BLK Thermoplastic Vulcanizate Elastomer Viprene™ P55D-22U-BLK is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac..
Tensile Strength at Break	16.5 MPa	2390 psi	ISO 37
Alliance Polymers Viprene™ P55D-22U-NAT Thermoplastic Vulcanizate Elastomer Viprene™ P55D-22U-NAT is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac..
Tensile Strength at Break	16.5 MPa	2390 psi	ASTM D412
3M Scotch® 31 Heavy Duty Mining Tape Scotch® Heavy Duty Mining Tape 31 has a tough, abrasion-resistant backing for jacket repair on mining cables. Due to extremely abrasive environment, the original jacket on the cable gets damaged of..
Tensile Strength at Break	16.5 MPa	2390 psi	ASTM D412
3M Scotch™ 2234 Cable Jacket Repair Tape 3M™ Scotch™ Cable Jacket Repair Tape 2234 provides a cost effective and efficient means of covering and protecting damaged sections of cable jacket, thereby extending the life of the cable and red..
Tensile Strength at Break	16.5 MPa	2400 psi	Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C
3M Dyneon™ FE 5643Q Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FE 5643Q can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formu..
Tensile Strength at Break	16.5 MPa	2390 psi
3M Scotch® FP-301 Heat Shrink Tubing Scotch® Heat Shrink Tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 135°C continuo..
Tensile Strength at Break	16.5 MPa	2390 psi
3M Scotch® FP-301VW Heat Shrink Tubing Scotch® Heat Shrink Tubing FP-301VW has the same outstanding balance of electrical, physical and chemical properties as FP-301 tubing, and is specially engineered for excellent flame resistance. FP..