Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 16.0 MPa | 2320 psi | ASTM D412 |
Multibase TPSiV™ 3010-60A Thermoplastic Silicone Vulcanizate These materials are a novel family of TPV products based on cross-linked silicone rubber dispersed into various engineering thermoplastics. The dispersion of the silicone internal phase is produced.. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ASTM D412 |
Multibase TPSiV™ 3011-70A Thermoplastic Silicone Vulcanizate These materials are a novel family of TPV products based on cross-linked silicone rubber dispersed into various engineering thermoplastics. The dispersion of the silicone internal phase is produced.. |
|||
Tensile Strength at Break | <= 16.0 MPa | <= 2320 psi | ISO/R527 |
Polykemi AB POLYelast TPE EC90 D50 P05B Thermoplastic Elastomer, PP/EPDM Information provided by Polykemi AB |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ASTM 1457-62 T |
Fluorseals PTFE 15% glass filled Improved compressive strength and wear resistance.Information provided by TEKU GmbH Fluorkunststoffe, a distributor of Fluorseals materials. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ASTM D638 |
Ineos Styrenics 473D High-Impact Polystyrene Resin (NAFTA) Description: High-impact, high-flow grade for a wide variety of applications, including appliance components, consumer electronics housings, magnetic and optical media, building and construction, pa.. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ISO 527-1, -2 |
LyondellBasell Hostacomâ„¢ CB271FC Thermoplastic Polyolefin Elastomer Description: Hostacomâ„¢ CB271FC high melt flow, 2,400 MPa flexural modulus, precolored, UV-stabilized, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent combination of.. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL WCD771 PPE-TPE (Asia Pacific) Flexible, high tensile elongation, halogen-free extrusion grade intended for evaluation in applications such as cable jacket. Flame retardant performance capable of meeting UL VW-1 requirement. 80C .. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics NORYL WCD891B PPE-TPE (Europe-Africa-Middle East) Non-halogenated flame retardant, flexible Noryl resin intended for evaluation in wire and cable applications. Strong flame retardant performance capable of meeting VW-1 and 80°C end use tempera.. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ASTM D638 |
SABIC Innovative Plastics LNP THERMOCOMP TH0815A LNP* THERMOCOMP* TH0815A is a compound based on Polyurethane resin containing High Specific Gravity Filler. Added features of this material include: High Specific Gravity. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ISO R 527 |
Stir SpA SA 105/2 (PVC) Application: Extrusion sheath CEI 20-11 type TM 3Information provided by STIR SpA |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ASTM D412 |
Sumitomo Chemical ESPOLEX® 821 Thermoplastic Elastomer ESPOLEX® TPE Series is a group of thermoplastic elastomers produced by Sumitomo Chemical Company. Among its material advantages, ESPOLEX® TPE Series is distinguished by offering many low-densi.. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ASTM D638 |
UBE F222 Polyethylene Description: UBE Polyethylene is polymerized at high pressure using a tubular reactor. Production conditions are strictly controlled ensuring the product's superior physical and mechanical prope.. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ASTM D412 |
Borealis FR4830 Chemically Crosslinkable Polyethylene Compound for Primary Automotive Wires FR4830 is a chemically crosslinkable Non-halogen flame retardant Polyethylene compound for Primary Automotive and Appliance Wire. Applications: FR4830 is intended for use as a 125º C rated primary .. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ISO 527-1/-2 |
DSM Arnitel® PM471 45 Shore D, Extrusion Grade Copolyester Elastomer (North America) Product description: Arnitel® combines the advantages of engineering thermoplastics, being easy to process with excellent mechanical properties, at the same time with the flexibility of rubbers.Arn.. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ISO 527-2 |
ExxonMobil Exxtral™ BMV 301 Performance Polyolefin Product Description: A specialty thermoplastic polyolefin resin characterized by a good stiffness/toughness balance, designed for automotive interior application in which good surface finish, high s.. |
|||
Tensile Strength at Break | >= 16.0 MPa | >= 2320 psi | ISO R 527 |
Fainplast Compounds GA 89/2 Flexible PVC, Flame Retardant Sheathing Operating temperature 75°C |
|||
Tensile Strength at Break | >= 16.0 MPa | >= 2320 psi | ISO R 527 |
Fainplast Compounds GK 90 Flexible PVC, Flame Retardant Sheathing Lead Free General purposes |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ISO R 527 |
Fainplast Compounds GS 9015 Flexible PVC, Injection Molding for Footwear Technical items for soles |
|||
Tensile Strength at Break | >= 16.0 MPa | >= 2320 psi | ISO R 527 |
Fainplast Compounds KL 0993 Flexible PVC, Insulation for High Temperatures Lead Free Insulation |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ISO R 527 |
Fainplast Compounds PH 70/A Flexible PVC, Transparent Extrusion Transparent profiles and pipes |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ASTM D638 |
Azdel SuperLite® SL551000-100 PP Resin Matrix / 55% Glass Fiber (3.5 mm Molded Thickness) AZDEL SuperLite® SL551000-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic.. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ISO 527-1-2 |
Breplast Bretene TS COR White F60 High Density Polyethylene Recovered polyethylene compositeInformation provided by Breplast S.p.A. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ISO 527-1 |
Barlog Plastics KEBAFLEX E D 40.1 TPE-V, Shore D40 TPE-VInformation provided by BARLOG plastics GmbH. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | Press Cure 15 Minutes @ 188°C (370°F), Post Cure 24 Hours @ 250°C (482°F) |
3M Dyneon™ PFE 133TBZ High Temperature Perfluoroelastomer 3M™ Dyneon™ PFE 133TBZ is a technically advanced high temperature perfluorelastomer (HT PFE). It is designed to meet the challenges of higher temperature plasma applications. It is classified as F.. |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ASTM D638 |
Aclo Accutech Polypropylene Copolymer CP0436T20L Talc Reinforced |
|||
Tensile Strength at Break | 16.0 - 18.0 MPa | 2320 - 2610 psi | ASTM D4745-97 |
Adamas Adalon® 477 PTFE, 20% Aramid Fiber Information provided by Adamas, HPM |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ISO R 527 |
Fainplast Compounds MGS 75 Medical Flexible PVC, Injection Molding Connectors and special components |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ISO R 527 |
Fainplast Compounds MPH 78/T Medical Flexible PVC, Extrusion Technical tubes no DOP |
|||
Tensile Strength at Break | 16.0 MPa | 2320 psi | ISO R 527 |
Fainplast Compounds PM 7005 Flexible PVC, Lead Free Pipes and profiles |