Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO 527 |
Polimeri Europa Flexirene® MS 20 U Linear Low Density Polyethylene Flexirene MS 20 U is a linear low density polyethylene (LLDPE), with antioxidants, suitable for injection molding application.Parts made with Flexirene MS 20 U are characterized by optimum low tempe.. |
|||
Tensile Strength at Break | <= 10.0 MPa | <= 1450 psi | ISO/R527 |
Polykemi AB POLYelast TPE ED80 D40 UV Thermoplastic Elastomer Information provided by Polykemi AB |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible MG23B Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible R881C Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible R5160A Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM D 638 |
LyondellBasell Hifaxâ„¢ CA260GC Thermoplastic Polyolefin Elastomer Description: Hifaxâ„¢ CA260GC White fractional melt flow, 40 MPa flexural modulus, UV-stabilized, precolored thermoplastic elastomeric olefin (TEO) resin has an excellent balance of flexibility,.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics NORYL WCP821 PPE-TPE (Europe-Africa-Middle East) Flexible Noryl* injection molding grade. Low specific gravity with very good non-halogenated flame retardant performance. Developed for evaluation in over-molding applications such as plugs, strain .. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | |
Shin-Etsu Silicones FEA-261U Fluorosilicone Elastomer ShinEtsu FEA261 U is one of a series of fluorosilicone compounds. It is designed to process well in molding applications. It can be blended with other members of the series for intermediate hardness.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM D412 |
Teknor Apex Telcar® TL-4001C Thermoplastic Elastomer Notes: UV Stabilized Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstrip.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | 500 mm/min; ASTM D638 - ISO 527-2 |
DuPont Elvaloy® 3717 AC Ethylene and 17% Butyl Acrylate Copolymer Elvaloy® 3717 AC can be used for coextrusion, compounding and injection molding. In coextrusion, it can be used to improve sealing; in compounding, to improve low temperature and impact properties.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | 500mm/min; ASTM D638 Type IV Specimen |
Westlake EC1924AA Low Density Polyethylene WESTLAKE low-density polyethylene EC1924 is a resin that is widely used in the boardstock coating industry. This material has an excellent combination of low neck-in, ease of processing, good chill-.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | 500mm/min; ASTM D638 Type IV Specimen |
Westlake EC808AA Low Density Polyethylene WESTLAKE low-density polyethylene EC808 is a general-purpose formulation used for injection molding, general-purpose extrusion coating and laminating. It can be drawn down to low coating weights, is.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | 500mm/min; ASTM D638 Type IV Specimen |
Westlake EM808AA Low Density Polyethylene WESTLAKE low-density polyethylene EM808 is a general-purpose low-density formulation used for injection molding applications and general purpose extrusion.Application/UsesFood packagingMedicalFDA: T.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | 500mm/min; ASTM D638 Type IV Specimen |
Westlake EMAC® SP2207 20% Ethylene-Methyl Acrylate Copolymer Westlake EMAC® SP2207 is a 20% EMA copolymer designed for extrusion coating, tie-layers, and extrusions where flexibility, compatibility, low heat seal temperatures, or high coefficient of friction.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM D638 |
ELASTO UK Dryflex® 420401S SBS Based Material, 40D Hardness, Natural The 400S-series is a good alternative for indoor applications and disposable articles that do not have high requirements for ageing and heat resistance. The raw materials are specially selected for.. |
|||
Tensile Strength at Break | >= 10.0 MPa | >= 1450 psi | ISO R 527 |
Fainplast Compounds CL 63/K Flexible PVC, Sheathing General purpose, opaque surface |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM D412 |
Compuestos Dominicanos Polycom CO-554040-01 PVC Compound Compuestos Dominicanos SA produces a wide variety of PVC compounds for the injection molding of footwear products; everything from full injection, shoe soles, boots, and PVC compounds for oil resist.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO R 527 |
Fainplast Compounds PG 58/K1-UV Flexible PVC, Extrusion Modified with Rubber Gaskets mat finish UV-Resistant |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO R 527 |
Fainplast Compounds PH 60 Flexible PVC, Transparent Extrusion Transparent profiles |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM-D638 |
Braskem IC32 LLDPE Injection Molding Polyethylene Copolymer IC32 is a linear low-density polyethylene, narrow molecular weight butene-1 copolymer produced by the solution process for injection molding. It offers good fluidity, excellent flexibility and tenac.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM D638 |
Arkema Group LOTADER® 4210 Terpolymer Ethylene - Acrylic Ester - Maleic Anhydride LOTADER 4210 is a random terpolymer of Ethylene, Acrylic Ester and Maleic Anhydride, polymerized by high-pressure autoclave process. LOTADER 4210 is a versatile adhesive for extrusion coating or lam.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM D412 |
3M Scotchkote™ 80XRG 539 Urethane Elastomer Scotchkote Urethane Elastomer 80XRG 539 has been specifically developed as a fast curing elastomeric repair system with a high degree of flexibility for rebuilding and resurfacing rubber components... |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM D412 |
Teknor Apex Monprene® MP-2604B Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO 527-1/-2 |
DuPont Performance Polymers Hytrel® G3548 NC010 Polyester Elastomer TPC-ET
(Unverified Data**) 35 Shore D Standard Performance Polyester Elastomer with Non-discoloring StabilizerInformation provided by DuPont Performance Polymers |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO R 527 |
Fainplast Compounds PG 6620 Flexible PVC, Extrusion Modified with Rubber Profiles modified with rubber |
|||
Tensile Strength at Break | >= 10.0 MPa | >= 1450 psi | |
Beijing Evergrow Resources PTFE, 20% Glass Fiber, 5% Graphite Filled Filled PTFE article is manufactured by molding method with filled PTFE resin. Filled PTFE resin is manufactured by compounding PTFE granular resin with fillers of many different kinds. Broadly speak.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO R 527 |
Fainplast Compounds PM 65/R Flexible PVC, Lead Free Extrusion modified with rubber |