Polymer Property : Tensile Strength at Break = 1160 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	8.00 MPa	1160 psi	ASTM D638
SABIC MG500026 Linear Low Density Polyethylene for Compounding Product Description: MG500026 is a Linear Low Density Polyethylene grade with a narrow molecular weight distribution primarily suitable for compounding applications. It is in the powder form and h..
Tensile Strength at Break	8.00 MPa	1160 psi	ISO 527
SABIC Innovative Plastics LNP Lubricomp FX00617 PE LNP* Lubricomp* FX00617 is a compound based on Polyethylene resin containing Silicone. Added features of this material include: Internally Lubricated.This data was supplied by SABIC-IP for the Amer..
Tensile Strength at Break	8.00 MPa	1160 psi	50 mm/min; ISO 527
SABIC Innovative Plastics NORYL WCP761 PPE-TPE (Asia Pacific) Flexible Noryl injection molding grade. Low specific gravity with very good non-halogenated flame retardant performance. Developed for evaluation in overmolding applications such as plugs, strain re..
Tensile Strength at Break	8.00 MPa	1160 psi	50 mm/min; ISO 527
SABIC Innovative Plastics LNP STAT-LOY M3000 PP (Europe-Africa-Middle East) LNP* Stat-loy* M3000 is a compound based on Polypropylene resin. Added features of this material include: Antistat, High Impact.
Tensile Strength at Break	>= 8.00 MPa	>= 1160 psi
Silikony Polskie Polsil Gum 100/60 HTV Silicone Rubber Polsil Gum is a general purpose master batch compound, vulcanizing at high temperature after addition of vulcanizing agent. Silicone rubber obtained from PolsilÂ® GUM shows useful properties: agei..
Tensile Strength at Break	8.00 MPa	1160 psi	Die C; Flow direction; ASTM D412
Teknor Apex SarlinkÂ® 4180 Thermoplastic Elastomer A highly engineered Thermoplastic Elastomer for use in demanding applications. SarlinkÂ® 4180 is a medium hardness grade possessing exceptional tensile strength, superior compression set, chemical..
Tensile Strength at Break	8.00 MPa	1160 psi	500mm/min; ASTM D638 Type IV Specimen
Westlake EMAC® SP2268 24% Ethylene-Methyl Acrylate Copolymer Westlake EMAC® SP2268 is a 24% EMA copolymer designed for extrusion coating, tie-layers, compounding, and extrusions where flexibility, compatibility, low heat seal temperatures, or high coefficien..
Tensile Strength at Break	8.00 MPa	1160 psi	ISO 527-2
Total LDPE 1200 MN 18 C Low Density Polyethylene - Injection Molding and Compounding LDPE 1200 MN 18 C is a low density polyethylene made by a high pressure autoclave process without antioxidant.Application examples: flexible molding, handles, closures, household items, toys, variou..
Tensile Strength at Break	8.00 MPa	1160 psi	ASTM D638
UBE J5019 Polyethylene Description: UBE Polyethylene is polymerized at high pressure using a tubular reactor. Production conditions are strictly controlled ensuring the product's superior physical and mechanical prope..
Tensile Strength at Break	8.00 MPa	1160 psi	ASTM D638
ELASTO UK Dryflex® 502650S SEBS Based Material, Unfilled Qualities, 65A Hardness, Black The 500-seriesis very favorable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mecha..
Tensile Strength at Break	8.00 MPa	1160 psi	ISO R 527
Fainplast Compounds GS 59/C Flexible PVC, Injection Molding for Footwear Sandals
Tensile Strength at Break	8.00 MPa	1160 psi	ISO R 527
Fainplast Compounds GS 59/F Flexible PVC, Injection Molding for Footwear Sandals
Tensile Strength at Break	8.00 MPa	1160 psi	ISO R 527
Fainplast Compounds GS 60/R1 Flexible PVC, Injection Molding for Footwear Anti-accident soles
Tensile Strength at Break	8.00 MPa	1160 psi	ISO R 527
Fainplast Compounds GS 65/R-AS Flexible PVC, Injection Molding for Footwear Oil resistent and antistatic soles
Tensile Strength at Break	>= 8.00 MPa	>= 1160 psi	ISO R 527
Fainplast Compounds GS 7080 Flexible PVC, Electrical Plugs Plugs
Tensile Strength at Break	8.00 MPa	1160 psi	ISO R 527
Fainplast Compounds PH 61/K1-AM Flexible PVC, Transparent Extrusion Transparent profiles embossed anti mould
Tensile Strength at Break	8.00 MPa	1160 psi	ISO R 527
Fainplast Compounds PM 5740 Flexible PVC, Extrusion Gaskets for frames
Tensile Strength at Break	8.00 MPa	1160 psi	ASTM D638
Azdel SuperLite® SL552000-100 PP Resin Matrix / 55% Glass Fiber (10 mm Molded Thickness) AZDEL SuperLite® SL552000-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic..
Tensile Strength at Break	8.00 MPa	1160 psi	ASTM D638
Braskem PB 608 LDPE Injection Molding Polyethylene Description: PB608 is a grade produced under high pressure in an autoclave reactor. This grade is especially designed for injection molding of articles that must show excellent flexibility propertie..
Tensile Strength at Break	8.00 MPa	1160 psi	ASTM D638
Arkema Group LOTADER® 3410 Terpolymer Ethylene - Acrylic Ester - Maleic Anhydride LOTADER 3410 is a random terpolymer of Ethylene, Acrylic Ester and Maleic Anhydride, polymerized by high-pressure autoclave process. LOTADER 3410 is a versatile adhesive for extrusion coating or lam..
Tensile Strength at Break	8.00 MPa	1160 psi	ISO R 527
Fainplast Compounds PM 6045 Flexible PVC, Lead Free Gaskets for frames
Tensile Strength at Break	8.00 MPa	1160 psi
LATI Latimass 53-04 D009 PP Homopolymer, Impact Modified Specific density compound based on Polypropylene homopolymer (PPh), impact modified. Special filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation..
Tensile Strength at Break	8.00 MPa	1160 psi	ISO R 527
Fainplast Compounds GS 56/R Flexible PVC, Injection Molding for Footwear Oil resistant vamp boots
Tensile Strength at Break	8.00 MPa	1160 psi	ISO R 527
Fainplast Compounds GS 60 Flexible PVC, Injection Molding for Footwear Soles model Dottor Martens