Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO 527 |
Polimeri Europa Flexirene® MS 20 A Linear Low Density Polyethylene Flexirene MS 20 A is a linear low density polyethylene (LLDPE), with antioxidants, suitable for injection molding application.Parts made with Flexirene MS 20 A are characterized by optimum low tempe.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO 527 |
Polimeri Europa Flexirene® MS 26 A Linear Low Density Polyethylene Flexirene MS 26 A is a linear low density polyethylene (LLDPE), with antioxidants, suitable for injection molding application.Parts made with Flexirene MS 26 A are characterized by optimum low tempe.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible R881C Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM D638 |
Braskem BI 818 LDPE Injection Molding Polyethylene
(discontinued **) Applications: Injection molding; masterbatches. Information provided by Braskem |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO 527 |
GEHR Plastics PE-ELS® Polyethylene HDPE A variant of PE-HD with improved electrical conductivity.Polyethylene has a good chemical resistance against almost all acids and bases, detergents and hot water. PE has good insulation properties a.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM D 638 |
LyondellBasell Hifaxâ„¢ CA260GC Thermoplastic Polyolefin Elastomer Description: Hifaxâ„¢ CA260GC White fractional melt flow, 40 MPa flexural modulus, UV-stabilized, precolored thermoplastic elastomeric olefin (TEO) resin has an excellent balance of flexibility,.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics NORYL WCP821 PPE-TPE (Europe-Africa-Middle East) Flexible Noryl* injection molding grade. Low specific gravity with very good non-halogenated flame retardant performance. Developed for evaluation in over-molding applications such as plugs, strain .. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM D638 |
Solvay Specialty Polymers Polidiemme® G/440 Thermoset Elastomer (TSE) Elastomer based compound crosslinkable by ambient moisture, consisting of a silane pregrafted base compound to be used with a catalyst masterbatch (Sioplas® method)Standards complying: Cenelec HD.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | |
Shin-Etsu Silicones FEA-261U Fluorosilicone Elastomer ShinEtsu FEA261 U is one of a series of fluorosilicone compounds. It is designed to process well in molding applications. It can be blended with other members of the series for intermediate hardness.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | |
Shin-Etsu Silicones SV-57000U High Strength Silicone Elastomer SV57000U is one of a series of silicone bases designed for applications requiring high strength.. Product Features: Excellent mechanical properties.Typical Applications: Molding and Extrusion applic.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL PX500 PPE (Asia Pacific) Noryl PX500 is an unfilled modified polyphenylene ether resin capable of multiple conversion routes. This resin is designed for lower odor during conversion than many standard modified PPE resins. .. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | 500mm/min; ASTM D638 Type IV Specimen |
Westlake EMAC® Plus SP1307 20% Ethylene-Methyl Acrylate Copolymer Westlake EMAC® Plus SP1307 is a 20% EMA copolymer designed for extrusion coating, laminations, and blending where EMA properties are needed, but higher temperature resistance is required. SP1307 is.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO 527-2 |
Borealis Daplen™ EF267AI Polypropylene TPO Compound Daplen™ EF267AI is a 20 % mineral filled polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness and is easy to process... |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM D638 |
ELASTO UK Mediprene™ 500900M TPE, Medical Applications, 90A Hardness All Mediprene™ compounds are designed and manufactured for use in medical and pharmaceutical applications. In both medical and food contact areas, high application demands are found, such as:Low e.. |
|||
Tensile Strength at Break | >= 10.0 MPa | >= 1450 psi | ISO R 527 |
Fainplast Compounds GA 63 Flexible PVC, Flame Retardant Sheathing Good flexibility |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO R 527 |
Fainplast Compounds GS 67/BT Flexible PVC, Injection Molding for Footwear Soles for cold climates |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO R 527 |
Fainplast Compounds GS 69/F Flexible PVC, Injection Molding for Footwear Sandals |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO R 527 |
Fainplast Compounds GS 69/P Flexible PVC, Injection Molding for Footwear Pearl sandals |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO R 527 |
Fainplast Compounds PMS 60 Flexible PVC, Lead Free Gaskets for frames |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO R 527 |
Fainplast Compounds MPH 50/T Medical Flexible PVC, Extrusion Technical tubes and peristaltic pump segments no DOP |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO R 527 |
Fainplast Compounds PM 5540 Flexible PVC, Extrusion Gaskets for frames |
|||
Tensile Strength at Break | >= 10.0 MPa | >= 1450 psi | ASTM D4745-11 |
Adamas Adalon® 463 PTFE, 15% Special Polyimide Information provided by Adamas, HPM |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ASTM D412 |
Teknor Apex Monprene® MP-2604B Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
Tensile Strength at Break | >= 10.0 MPa | >= 1450 psi | |
Beijing Evergrow Resources PTFE, 20% Glass Fiber, 5% Graphite Filled Filled PTFE article is manufactured by molding method with filled PTFE resin. Filled PTFE resin is manufactured by compounding PTFE granular resin with fillers of many different kinds. Broadly speak.. |
|||
Tensile Strength at Break | 10.0 MPa | 1450 psi | ISO R 527 |
Fainplast Compounds PM 7075 Flexible PVC, Lead Free Various profiles |